12V 24V to 9V Converter, DROK 10A DC Synchronous Buck Converter Voltage Regulator 10-35V to 9VDC Step Down Transformer Power Supply Module

DROK 090065 - Notice: this item have no input reversal protection, please don't reverse, or it will cause damage to the power supply When the operating environment temperture exceeds 40 degrees Celsius, please reduce the power to ensure the long-term working temperature of the power supply is below 65 °c Package Include: 1x DC/DC Buck Converter Module properties: synchronous rectification DC-DC step-down module buck.

Input voltage: the buck converter input voltage range is DC 12V/24V wide Voltage 10v-35v. Output voltage: the voltage regulator board output voltage is DC 9V, max conversion efficiency is 90 percent, low heat. Output current: 10a continuous output the test environment temperature is 35 °C. Drok 12v 24v to 9v converterfeatures: module properties: dc step-down module buck chip:synchronous rectification  dc-dc chip input voltage: dc12v/24v wide voltage 10v-35v output voltage: dc 9v Output Current: 10A continuous output  the test environment temperature is 35 °C Conversion efficiency: max 90%, short circuit protection, low heat Working temperature: -25 °c to +60 °Industrial-grade -40 °c to +80 °c limit Dimension:74 x 74 x 32mm L x W x H Protection:over-current protection, overheating protection.

12V 24V to 9V Converter, DROK 10A DC Synchronous Buck Converter Voltage Regulator 10-35V to 9VDC Step Down Transformer Power Supply Module - Usage: led display, electric fans, air conditioning, toy cars, navigation, audio, solar energy, Surveillance, motors, etc. Usage:led display, air conditioning, audio, solar energy, surveillance, electric fans, toy cars, navigation, motors, etc.

More information about DROK 090065

Gikfun Screw Shield Expansion Board for Arduino UNO R3 EK7007

Esooho LYSB014SGTP20-ELECTRNCS - Direct plug puzzle board, NO soldering needed. 1 pair of screw shield for arduino uno r1 - r3 The Arduino Main Board NOT included It can be plugged directly into the Arduino controller. Newest vision UNO R3 compatible. It offers a reliable and convenient solution for connecting more Arduino components to the Arduino controller.

More information about Esooho LYSB014SGTP20-ELECTRNCS


Similar products



Nextrox DC/DC Converter Regulator 24V Step Down To 12V 20A 240W Low Voltage Transformer Waterproof

KEEDOX SKUOSDN6140140 - Brand-new, die-cast aluminum shell and high quality design, maximum transfer efficiency of 96%. Built-in full protection against over/under voltage input, overload, over-current, overhead, over-temperature and short circuit. Auto-recovery when device is back to normal operating. Newest vision UNO R3 compatible.

It offers a reliable and convenient solution for connecting more Arduino components to the Arduino controller. Specifications: input voltage: 24v dc input range: 12-40v dc output voltage: 12v dc output current: 20a max / 240w case material: die-cast aluminum potting material: epoxy sealedfeatures: brand new and high quality Industry grade DC 24V to 12V step-down converter More than 90% power conversion efficiency Built-in over/under voltage input, overload, telecommunications, medical equipments, overhead, security systems, and short circuit full protection Used in vehicles, instruments etc 100% waterproof & anti-shock protection Ultra compact size, light weight Auto-recovery when device is back to normal operating Stable and reliable performance Simple to installPackage included: 1 x DC 24V to 12V step-down converter It can be plugged directly into the Arduino controller.

Nextrox DC/DC Converter Regulator 24V Step Down To 12V 20A 240W Low Voltage Transformer Waterproof - . 100% waterproof ip68, moisture-proof & anti-shock protection. Direct plug puzzle board, NO soldering needed. Industry grade dc 24v to 12v step-down converter, solar generate electricity, surveillance systems, car audio device, display screen of bus and taxi, railway signals, hospital equipment, widely used in automotive, instruments, security systems, electricity, telecommunications etc.

More information about KEEDOX SKUOSDN6140140


Similar products



Real 18AWG 43x2pcs Wires 10 Pairs DC Power Pigtail Cable, 12V 5A Male & Female Connectors for CCTV Security Camera and Lighting Power Adapter by MILAPEAK 2.1mm x 5.5 mm, Ultra Thick 18AWG

MILAPEAK 57101 - Excellent performance because of quality materials Heavy-duty quality with 43 x 012mm pure copper wire brings the reliable and secure connection. 18awg dc power pigtail cable provides a more safer DIY solution for DC power connectivity, work with a power adapter or a power supply box. Easy installation】- easy to weld and install, as the ends of the dc power pigtail cables are pre-tinned making them super easy to solder.

100% waterproof ip68, moisture-proof & anti-shock protection. Brand-new, die-cast aluminum shell and high quality design, maximum transfer efficiency of 96%. Built-in full protection against over/under voltage input, overhead, over-current, overload, over-temperature and short circuit. Auto-recovery when device is back to normal operating.

Real 18AWG 43x2pcs Wires 10 Pairs DC Power Pigtail Cable, 12V 5A Male & Female Connectors for CCTV Security Camera and Lighting Power Adapter by MILAPEAK 2.1mm x 5.5 mm, Ultra Thick 18AWG - Direct plug puzzle board, NO soldering needed. They are fairly long too, 11" total, 9. 5" of wire. Compatibility】- easy dc power solution, compatible with all cctv systems and other 2. 1*5. 5mm dc power devices like part lighting or led strips.

More information about MILAPEAK 57101


Similar products



ELEGOO MEGA 2560 R3 Board ATmega2560 ATMEGA16U2 + USB Cable for Arduino RoHS Compliant

Elegoo LYSB01H4ZDYCE-ELECTRNCS - The chip is atmega2560-16au and Atmega16u2, same with the official version. Also features two wires on the other Red Black wire jackets indicate polarity. This makes the difference when using with bigger power supplies, they should be good to 5A or even a touch more with real 18AWG. Safe & rapid transmission】- heavy-duty quality with 43 x 0

14 mm 100% copper strands brings the reliable, secure connection and rapid transmission. This 18awg dc power pigtail provide a very good reliable DC power connection. What you get】-10 x red/black male pigtails dc power connectors, 10 x red/Black Female Pigtails DC Power Connectors, our 1 Year Free Warranty and Full Refund within 30 Days ensure pleasant shopping experience.

ELEGOO MEGA 2560 R3 Board ATmega2560 ATMEGA16U2 + USB Cable for Arduino RoHS Compliant - The mega is 100 percent compatible with Arduino and most shields designed for the Arduino Mega2560 R3. 18awg dc power pigtail cable provides a more safer DIY solution for DC power connectivity, work with a power adapter or a power supply box. Easy installation】- easy to weld and install, as the ends of the dc power pigtail cables are pre-tinned making them super easy to solder.

In future, shields will be compatible both with the board that use the avr, which operate with 5V and with the due that operate with 3. We'd like to receive your valuable suggestions for our products and make your idea come true. They are fairly long too, 11" total, 9. 5" of wire.

More information about Elegoo LYSB01H4ZDYCE-ELECTRNCS


Similar products



Carviya 12V 24V Heavy Duty 16 AWG 15A 20A Male Plug Cigarette Lighter Adapter Power Supply Cord with 1 Meter 3.3 Feet Cable Wire For Car Inverter,Air Pump, Electric Cup

Carviya 4332951758 - 0 pinout: added sda and sCL pins that are near to the AREF pin. Brand-new, die-cast aluminum shell and high quality design, maximum transfer efficiency of 96%. Built-in full protection against over/under voltage input, over-current, overhead, overload, over-temperature and short circuit. Auto-recovery when device is back to normal operating.

Also can use other appliances with terminal. Improved and expert version: 1. Specification: The size of the hole in the ring terminal: 025 inch / 1/4"wire Length: 3. 3ft wire size: 16awg pakcage included: 1 x carviya cigarette Lighter Plug Power1 X Extra 20A Glass Fuse It can be plugged directly into the Arduino controller.

Carviya 12V 24V Heavy Duty 16 AWG 15A 20A Male Plug Cigarette Lighter Adapter Power Supply Cord with 1 Meter 3.3 Feet Cable Wire For Car Inverter,Air Pump, Electric Cup - Very versatile. Recommended within 20A. The current inside the car must below this product current of the fuse. If the current is more larger, then the fuse will burnout to have protective effects. In future, shields will be compatible both with the board that use the avr, which operate with 5V and with the due that operate with 3.

. The 500w, 1500w power of the inverter is nominal power, 1000W, so in theory, this item can used to those inverter. Please note the fuse of this product is 15a max is 20A, Because the car cigarette lighter socket current is generally 20A, if more than the fuse inside the car will be dangerous.

More information about Carviya 4332951758


Similar products



10 Pack - EPAuto ATC/ATO 10 Gauge 30 AMP In-Line Fuse Holder

EPAuto AE-008-1 - 16 awg heavy duty red & black copper wire, plug shell made by the bakelite material phenolic plastic, Spring is Copper Material. 100% waterproof ip68, moisture-proof & anti-shock protection. Brand-new, die-cast aluminum shell and high quality design, maximum transfer efficiency of 96%. Built-in full protection against over/under voltage input, over-current, overhead, overload, over-temperature and short circuit.

Auto-recovery when device is back to normal operating. 0 pinout: added sda and sCL pins that are near to the AREF pin. Industry grade dc 24v to 12v step-down converter, display screen of bus and taxi, hospital equipment, electricity, instruments, surveillance systems, car audio device, railway signals, security systems, widely used in automotive, solar generate electricity, telecommunications etc.

10 Pack - EPAuto ATC/ATO 10 Gauge 30 AMP In-Line Fuse Holder - Real thick 18awg】- real 18awg vs common 22awg, real 18awg are bigger wire than other 22awg pigtails, as it has heavy gauge with 43 pcs 014 mm 100% copper strands inside one cable, and allows them to be used for higher current devices, total 86 pcs 014 mm copper strands inside the two Red / Black cables.

This makes the difference when using with bigger power supplies, they should be good to 5A or even a touch more with real 18AWG. Safe & rapid transmission】- heavy-duty quality with 43 x 014 mm 100% copper strands brings the reliable, secure connection and rapid transmission.

More information about EPAuto AE-008-1


Similar products



ELEGOO 4 Channel DC 5V Relay Module with Optocoupler for Arduino UNO R3 MEGA 2560 1280 DSP ARM PIC AVR STM32 Raspberry Pi

ELEGOO EL-SM-006 - In-line fuse holder for ATC/ATO type fuses. They are fairly long too, 11" total, 9. 5" of wire. Compatibility】- easy dc power solution, compatible with all cctv systems and other 2. 1*5. 5mm dc power devices like part lighting or led strips. 4-channel relay output modules, relay output contacts 250V 10A. Hardness, high resistance, Arc Resistance, Heat Resistance.

Very versatile. Newest vision UNO R3 compatible. It offers a reliable and convenient solution for connecting more Arduino components to the Arduino controller. Relay output maximum contact is AC250V 10A and DC30V 10A. Standard interface can be directly connected with microcontrollers. Working status indicator lights are conducive to the safe use.

ELEGOO 4 Channel DC 5V Relay Module with Optocoupler for Arduino UNO R3 MEGA 2560 1280 DSP ARM PIC AVR STM32 Raspberry Pi - 0 pinout: added sda and sCL pins that are near to the AREF pin. It is also able to control various appliances and other equipments with large current. Widely used for all mcu control, PLC control, industrial sector, smart home control.3v. 18awg dc power pigtail cable provides a more safer DIY solution for DC power connectivity, work with a power adapter or a power supply box.

More information about ELEGOO EL-SM-006


Similar products



Haitronic 120pcs 20cm Length Jumper Wires/Dupont Cable Multicolored10 Color 40pin M to F, 40pin M to M, 40pin F to F for Breadboard/Arduino Based/DIY/Raspberry Pi 2 3/Robot Ribbon Cables Ki

der DZ-DBX-01 - Direct plug puzzle board, NO soldering needed. Relay output maximum contact is AC250V 10A and DC30V 10A. Standard interface can be directly connected with microcontrollers. Working status indicator lights are conducive to the safe use. New released on amazon only on oct 7th 2016, although there are few reviews till now, we actually sold few hundreds of a month.

This 3 in 1 set jumper wire is durability tested ultra userfUL!After you tear apart into individual cable, in total 120pcs cable, 10 different color do to multiful DIY electronic connection. Each axis has 20cm length, with 10 colors optioneach color has 12 roots, f2m, and 3 various F2F, very convenient for Arduino/breadboard or other DIY connection, Maker experiment, engineers LAB testing, M2M pin, as well as can be soldering as you wish.

Haitronic 120pcs 20cm Length Jumper Wires/Dupont Cable Multicolored10 Color 40pin M to F, 40pin M to M, 40pin F to F for Breadboard/Arduino Based/DIY/Raspberry Pi 2 3/Robot Ribbon Cables Ki - Also can use other appliances with terminal. In-line fuse holder for ATC/ATO type fuses. Hardness, high resistance, Arc Resistance, Heat Resistance. What’s in package: * 1 x 20cm 40-pin male to female prototyping jumper wires ribbon cable* 1 x 20cm 40-pin male to male prototyping jumper wires ribbon cable * 1 x20cm 40-pin Female to Female prototype Jumper Wires Ribbon Cable ØYour REVIEW is ULTRA PRECIOUS! we sincerely invite you share your review for this Multicolored BB Jumper Wires, MANY THANKS! It can be plugged directly into the Arduino controller.

Brand-new, die-cast aluminum shell and high quality design, maximum transfer efficiency of 96%. Built-in full protection against over/under voltage input, overload, overhead, over-current, over-temperature and short circuit. Auto-recovery when device is back to normal operating.

More information about der DZ-DBX-01


Similar products



Elegoo EL-CB-001 UNO R3 Board ATmega328P ATMEGA16U2 with USB Cable for Arduino

ELEGOO EL-CB-001 - Just peel off. Factory directly, 10 tiny copper wires inside of single jumper wire: high-level copper wire inside, durable for conductive connection. 0127mm, 36 awg/ single root, 20cm7. 87inch/axis; Standard 2. 54mm headers and sockets. Can be detached into120 single axis: 40 male-male, 40 male-female, 40 female-female.

Computers and smart phone maintainance, various prototyping, if the terminals does not damaged it can be reused, such as Arduino/Maker/3D printer control board, DIY experiment needs frequently, if dam. New improvement: clearly printed on the female header connector, more precise and easier to use the wire.

Elegoo EL-CB-001 UNO R3 Board ATmega328P ATMEGA16U2 with USB Cable for Arduino - This makes the difference when using with bigger power supplies, they should be good to 5A or even a touch more with real 18AWG. Safe & rapid transmission】- heavy-duty quality with 43 x 014 mm 100% copper strands brings the reliable, secure connection and rapid transmission. 0 pinout: added sda and sCL pins that are near to the AREF pin.

Improved and expert version: 1. So we can control the quality of our productions by ourselves for you. Faster transfer rates and more memory. Relay output maximum contact is AC250V 10A and DC30V 10A.

More information about ELEGOO EL-CB-001


Similar products



Mudder Lead Free Solder Wire Sn99 Ag0.3 Cu0.7 with Rosin Core for Electrical Soldering 0.22lbs 0.6 mm

Mudder - The second one is a not connected pin, that is reserved for future purposes. Specifications:  lead content: lead free Flux: 2%  Sn/ Ag/ Cu: 99%/ 03%/ 07%  weight: 100 g/ 022 lb diameter: 06mm/ 0023 inch melting point: 215 - 220 degrees celsius/ 419 - 428 degrees fahrenheit  Package includes:  1 x Solder wire spool Warm notice: Lead-free solder has a higher melting temperature, which may require a higher temperature tip or rheostat, depending on your iron.

Good quality soldering wire: good solder ability both in electrical conductivity and thermal conductivity; With the solder wire reel, soldering can be accomplished quickly. Line nose aperture is 6. 3 mm. Rvb 2 x 1. 5 square red and black cable, red cord is positive, black cord is negative. Cigarette lighter plug already soldered with electric iron, robust and reliable, plug and play.

Mudder Lead Free Solder Wire Sn99 Ag0.3 Cu0.7 with Rosin Core for Electrical Soldering 0.22lbs 0.6 mm - 100% waterproof ip68, moisture-proof & anti-shock protection. Hardness, arc resistance, High Resistance, Heat Resistance. Phenolic plastic is the ideal high-temperature electrical materials, the quality is far superior to plastic material. With green led indicator light about 2ma current almost no electricity; Built-in 15A glass fuse, and come with an extra 20A glass fuse to spare.

More information about Mudder


Similar products