A-iPower SUA12000E 12,000-Watt Gasoline Powered Generator with Electric Start, GFCI Outlet Wheel Kit Included

#ad
A-iPower Corp SUA12000E #ad - Its gfci protected Outlets provides added protection and safety under damp condition. Gfci protected outlets provides added protection and safety under damp condition. 0 gallon, large heavy duty all steel construction fuel tank provides up to 9 hours of run time at 50% load. Equipped with a keyless one-touch button for electric start, it allows an effortless startup of the generator.

None carb complied, can not ship to California. The 1-1/4in heavy duty full frame provides added strength and protection for the generator. With over 25 years of experience and reliability this design provides the greatest peak wattage for starting your motor-driven tools and appliances. Keyless one-touch push button provides an effortless start.

A-iPower SUA12000E 12,000-Watt Gasoline Powered Generator with Electric Start, GFCI Outlet Wheel Kit Included #ad - The size and power output make the SUA12000E the perfect generator for construction sites or back-up power for your home during emergencies. With a large 7 gallon heavy duty all steel construction fuel tank with built in fuel gauge, it provides an average run time of 9 hours at 50% load. Built-in dc adapter plug.

Large 9. 12, 000 starting watts/ 9, 000 running watts with electric start. Dc charging cables included.

More information about A-iPower Corp SUA12000E #ad

Porch Shield Waterproof Universal Generator Cover 38 x 28 x 30 inch, for Most Generators 5500-15000 Watt, Black

#ad
Porch Shield 10604006 #ad - 3. And full cover with seam sealing tape make it 100% waterproof. Two stacks of fabric at one side make the cover weather resistant, but ventilated. 3 size available. About porch shield when you buy a Porch Shield cover, you are not just getting a cover; you’re also purchasing peace of mind. Protect generator from rain, dust, snow, UV rays, tree sap and birds.

With ventilated structure, and velcro at one side for easy install and remove. About porch Shield Generator Cover 1. Generator cover is made of 600d durable polyester fabric with an added water-resistant laminated undercoating. 2. 4. Can be used in storage. Water-resistant backing keeps your generator completely dry.

Porch Shield Waterproof Universal Generator Cover 38 x 28 x 30 inch, for Most Generators 5500-15000 Watt, Black #ad - 3 years. A customer favorite for the design, practicability, durability and high quality items with great price. Elastic hem cord and bottom strap for custom secure fit, especially during high winds and severe weather. We will arrange replacement or refund for you asap. Velcro at another side allow easy install and remove.

Elastic hem cord and bottom strap allows for a Custom secure fit, especially during high winds and severe weather.

More information about Porch Shield 10604006 #ad


Similar products



Reliance Controls Corporation PB50 50-Amp NEMA 3R Power Inlet Box, 50-Amp for Generators Up to 12,500 Running Watts

#ad
Reliance Controls PB50 #ad - The reliance controls pb50 nema 3r power inlet Box is an outdoor/watertight electrical inlet for a 50 Amp CS6564 generator cord. Intended for use with 8 AWG 75 degrees C insulated wire. It is constructed of steel with rugged, anti-corrosive powder-coat paint and has a spring-loaded inlet cap to prevent moisture front entering the front-mounted connector inlet when not in use.

. Outdoor, raintight NEMA 3R non-metallic power inlet box. Maximum generator running watts: 12, 500 Can be used in storage. Water-resistant backing keeps your generator completely dry. And after over a century of innovation, Reliance Controls Corporation has built an enviable reputation for high quality, superior engineering and exceptional customer service.

Reliance Controls Corporation PB50 50-Amp NEMA 3R Power Inlet Box, 50-Amp for Generators Up to 12,500 Running Watts #ad - . It is designed to be located outdoors where the generator is running to prevent dangerous carbon monoxide fumes from the generator from entering your house. The exclusive patented design provides generous wiring space and facilitates rough-in. The primary product line consists of heavy duty time clocks and controls, generator accessories, transfer switches and transfer panels for portable generators and inverters.

Maximum generator input: [email protected]/250VAC. Since 1909, reliance controls corporation has contributed more innovations that any other single manufacturer and has been awarded over 85 patents on manual transfer switches, time switches and accessories.

More information about Reliance Controls PB50 #ad


Similar products



Camco PowerGrip Replacement Plug- Transform Your RV Plug Into a Safe and Durable PoweGrip Cord 50 AMP 55255

#ad
Camco 55255 #ad - Intended for use with 8 AWG 75 degrees C insulated wire. Replace the plug on your rv and auto power cord with the Camco 55255 50 AMP Replacement Plug with PowerGrip Handle. Accepts 10 to 4 gauge wires. Safe and reliable construction: replacement plug housing is constructed of UV resistant Polycarbonate and high quality components for the highest durablity and weather resistance.

50 amp replacement plug: designed to replace the male end of a 50 Amp RV cable. Constructed with high quality terminals and blades, this adapter offers superior conductivity in addition to a sleek design with compact features. Hassle free powergrip plug: the patented powerGrip handle eliminates frustration by assisting users in safely and conveniently gripping, plugging, and unplugging the male and female ends without straining or damaging the cord.

Camco PowerGrip Replacement Plug- Transform Your RV Plug Into a Safe and Durable PoweGrip Cord 50 AMP 55255 #ad - Simple and quick installment: Plug is accompanied with a step by step guide for plug replacement and installation. Designed  with convenience and simplicity in mind, this adapter is constructed  with the patented PowerGrip molded handle that makes gripping, plugging and unplugging your RV's power adapter simple and hassle free.

And full cover with seam sealing tape make it 100% waterproof. Two stacks of fabric at one side make the cover weather resistant, but ventilated. Maximum generator running watts: 12, 500 Listed with CSA.

More information about Camco 55255 #ad


Similar products



Porch Shield Waterproof Universal Generator Cover 38 x 28 x 30 inch, for Most Generators 5500-15000 Watt, Gray

#ad
Porch Shield 10604009 #ad - 50 amp replacement plug: designed to replace the male end of a 50 Amp RV cable. 3 sizes available. Can be used in storage. Water-resistant backing keeps your generator completely dry. 3 years warranty. Outdoor, raintight NEMA 3R non-metallic power inlet box. Can be used in storage. And full cover with seam sealing tape make it 100% waterproof.

Two stacks of fabric at one side make the cover weather resistant, but ventilated. 6. Protect generator from rain, UV rays, dust, snow, tree sap and birds. Accepts 10 to 4 gauge wires. Safe and reliable construction: replacement plug housing is constructed of UV resistant Polycarbonate and high quality components for the highest durablity and weather resistance.

Porch Shield Waterproof Universal Generator Cover 38 x 28 x 30 inch, for Most Generators 5500-15000 Watt, Gray #ad - A customer favorite for the design, practicability, durability and high quality items with great price. And full cover with seam sealing tape make it 100% waterproof. Two stacks of fabric at one side make the cover weather resistant, but ventilated. Listed with CSA. High conductivity with a compact and sleek design: replacement Plug is rated for 50 Amp - 125/250 Volts.

If your product fails within the warranty period, please feel free to email us.

More information about Porch Shield 10604009 #ad


Similar products



Feet - Conntek GIB1450-015, 15

#ad
Conntek GIB1450-015 #ad - 4 knockouts @ 085 inches. 15ft 50amp duo-rain seal kit temporary power cordnema 14-50p generator plug to CS-6364 ConnectorWith 50-Amp Connections Power Cords are manufactured using 600 volt Type STW cable Type. Velcro at another side allow easy install and remove. Elastic hem cord and bottom strap allows for a custom secure fit, especially during high winds and severe weather.

Protect generator from rain, UV rays, snow, dust, tree sap. Accepts 10 to 4 gauge wires. Safe and reliable construction: replacement plug housing is constructed of UV resistant Polycarbonate and high quality components for the highest durablity and weather resistance. Maximum generator input: [email protected]/250VAC.

Feet - Conntek GIB1450-015, 15 #ad - Intended for use with 8 AWG 75 degrees C insulated wire. 3 sizes available. Listed with CSA. High conductivity with a compact and sleek design: replacement Plug is rated for 50 Amp - 125/250 Volts. Outdoor, raintight NEMA 3R non-metallic power inlet box. Maximum generator running watts: 12, 50050 amp replacement plug: designed to replace the male end of a 50 Amp RV cable.

More information about Conntek GIB1450-015 #ad


Similar products



Conntek 80SS2-GYBX 50 Amps 125/250 Volts Power Inlet Box, For Generators Up to 12,500 Watts, Grey Cap

#ad
Conntek ISI 80SS2-GYBX #ad - Max rating: 12, 500 watts. Configuration: nema cs6375 or SS2-50P. 3 sizes available. 3 sizes available. 50a 125/250v inlet Box. Transfer switch cord with inlet box. Power inlet boxes run power to critical electrical systems, while avoiding harmful exhaust fumes that a generator produces. Simply mount the box on the exterior of a home/business, and run the wiring to a transfer switch/box installation.

Listed with CSA. High conductivity with a compact and sleek design: replacement Plug is rated for 50 Amp - 125/250 Volts. Recommended cord series: tes1450, 1450SS2 & TE6381. Intended for use with 8 AWG 75 degrees C insulated wire. These boxes are equipped with a SS2-50 CS6375 male configuration for large systems.

Conntek 80SS2-GYBX 50 Amps 125/250 Volts Power Inlet Box, For Generators Up to 12,500 Watts, Grey Cap #ad - Outdoor, raintight NEMA 3R non-metallic power inlet box. When emergency power is needed, connect a generator cord to the inlet box, and flip the switch for the transfer unit. And full cover with seam sealing tape make it 100% waterproof. Two stacks of fabric at one side make the cover weather resistant, but ventilated.

Maximum generator running watts: 12, 5003 year warranty.

More information about Conntek ISI 80SS2-GYBX #ad


Similar products



Conntek GIB1450-025 Duo-Rain Seal 50Amp Power Inlet Box and Temp Power Cord Combo Kit, 25 Feet

#ad
Conntek GIB1450-025 #ad - Constructed with high quality terminals and blades, this adapter offers superior conductivity in addition to a sleek design with compact features. Hassle free powergrip plug: the patented powerGrip handle eliminates frustration by assisting users in safely and conveniently gripping, plugging, and unplugging the male and female ends without straining or damaging the cord.

Simple and quick installment: Plug is accompanied with a step by step guide for plug replacement and installation. Generator cover is made of 600d durable polyester fabric with an added water-resistant laminated undercoating. When emergency power is needed, connect a generator cord to the inlet box, and flip the switch for the transfer unit.

Conntek GIB1450-025 Duo-Rain Seal 50Amp Power Inlet Box and Temp Power Cord Combo Kit, 25 Feet #ad - Velcro at another side allow easy install and remove. Elastic hem cord and bottom strap allows for a Custom secure fit, especially during high winds and severe weather. Protect generator from rain, UV rays, snow, dust, tree sap and Birds.3 year. For indoor or outdoor use with specific transfer switches, manual transfer panels and generator-ready load centers.

Max rating: 12, 500 watts. Configuration: nema cs6375 or SS2-50P. Locking collar for enhanced protection from the elements, while in use.

More information about Conntek GIB1450-025 #ad


Similar products



MICTUNING 125 250V 50Amp Heavy Duty RV Replacement Male Plug with Ergonomic Grip Handle Yellow

#ad
MICTUNING #ad - Money saving, easily replace the old plug It saves your money from replacing the entire supply cord and makes it easy to repair the issues that will eventually occur with the molded plug. Generator Power Inlet BOX. Effort saving grip handle - design of ergonomic grip handle on the back, makes it easier to plug-in and unplug, better saving physical strength!

4 knockouts @ 085 inches. 3 sizes available. Water-resistant backing keeps your generator completely dry. 50a 125/250v inlet Box. Easy to disassemble the old unit and re-do the connection or tighten up the clamping on a female receptacle are real pluses. Max rating: 12, 500 watts. Configuration: nema cs6375 or SS2-50P.

MICTUNING 125 250V 50Amp Heavy Duty RV Replacement Male Plug with Ergonomic Grip Handle Yellow #ad - Ergo grip plug handle with LED power indicators and angled connector for improved strain relief. Velcro at another side allow easy install and remove. Elastic hem cord and bottom strap allows for a Custom secure fit, especially during high winds and severe weather. Protect generator from rain, UV rays, snow, dust, tree sap and Birds.

3 year. For indoor or outdoor use with specific transfer switches, manual transfer panels and generator-ready load centers.

More information about MICTUNING #ad


Similar products



Reliance Controls Non-Metallic Power Inlet Box, Amps 50

#ad
Reliance Control Corporation PBN50 #ad - Can be used in storage. Water-resistant backing keeps your generator completely dry. 3 sizes available. Transfer switch cord with inlet box. Generator cover is made of 600d durable polyester fabric with an added water-resistant laminated undercoating. This inlet box is then safely hardwired through an outside wall directly to the transfer switch or panel, eliminating the need for cords running through windows or doors.

Constructed with high quality terminals and blades, this adapter offers superior conductivity in addition to a sleek design with compact features. Hassle free powergrip plug: the patented powerGrip handle eliminates frustration by assisting users in safely and conveniently gripping, plugging, and unplugging the male and female ends without straining or damaging the cord.

Reliance Controls Non-Metallic Power Inlet Box, Amps 50 #ad - Simple and quick installment: Plug is accompanied with a step by step guide for plug replacement and installation. Generator cover is made of 600d durable polyester fabric with an added water-resistant laminated undercoating. Maximum generator input: [email protected]/250VAC. Manufacturer: Reliance. 4 knockouts @ 085 inches.

Maximum generator running watts: 12, 500

More information about Reliance Control Corporation PBN50 #ad


Similar products



Square D by Schneider Electric QO250CP QO 50 Amp Two-Pole Circuit Breaker

#ad
Square D by Schneider Electric QO250CP #ad - 3 year warranty. Temp power cord: nema 14-50p 4-prong to CS6364, 15 feet in length. And full cover with seam sealing tape make it 100% waterproof. Two stacks of fabric at one side make the cover weather resistant, but ventilated. Recommended cord series: tes1450, 1450SS2 & TE6381. Accepts 10 to 4 gauge wires. Safe and reliable construction: replacement plug housing is constructed of UV resistant Polycarbonate and high quality components for the highest durablity and weather resistance.

4 knockouts @ 085 inches. Easy replacement - come with a clear and easy-enough instructions for simple installation, even if a green hand can do it well within minutes! Ergo grip plug handle with LED power indicators and angled connector for improved strain relief. Water-resistant backing keeps your generator completely dry.

Square D by Schneider Electric QO250CP QO 50 Amp Two-Pole Circuit Breaker #ad - Intended for use with 8 AWG 75 degrees C insulated wire. 4 knockouts @ 085 inches. Transfer switch cord with inlet box. Velcro at another side allow easy install and remove. Elastic hem cord and bottom strap allows for a custom secure fit, especially during high winds and severe weather.

More information about Square D by Schneider Electric QO250CP #ad


Similar products