Akozon Protection Board 36V 20A 10S Lithium Li-ion LiFePO4 Battery Battery BMS Protection Board with Balancing

Akozon - Supported charge current--5A Overcharge Protection--Overcharge Detect Voltage--4. 25±003v--vc1 overcharge protection--overcharge protection Delay--1000mS--Tc1 Overcharge Protection--Overcharge Relieve Voltage--4. 19±005v--vc2 balance--balance Detect Voltage--≥4. 18v--vc1 balance--balance Relieve Voltage--.

Specification: discharge--continuous discharge current--20a--vc1 discharge--instantaneous Discharge Currentwithin 1S--40A--Tc1 Discharge--Over Current Protection--3-5 times of continuous current--Vc2 Charge--Charge Voltage--Battery cells number X 4. 2v--loc charge--Max.

More information about Akozon

Pure Nickel Strip,10m 1Roll of 0.15x8mm Nickel Tap for 18650 26650 32650 AA Cell Battery Pack Spot Welding

Causin - 99. 96% pure nickel Sheet Density is 8. 902, melting point :1453, boiling point :2732, Nickel Resistivity: 6.84 1. It is pure nickel strip, it is different with tin plated steel strips. And u can put the pure Nickel tab in saline water at least 24H. U will found it is not rust. 2. Nickel strip is 015 thickness. Width is 8mm.

. 99. 96% pure nickel sheet density is 8. 902, boiling point :2732, melting point :1453, Nickel Resistivity: 6.84. 4. Pure nickel strips are mainly used in the battery welding and soldering field due to the fact that they can easily be soldered and welded; Pure nickel is widely used in our daily life due to its outstanding oxidation resistance, corrosion resistance, low resistance and high conductivity.

Pure Nickel Strip,10m 1Roll of 0.15x8mm Nickel Tap for 18650 26650 32650 AA Cell Battery Pack Spot Welding - 5. Pure nickel is low internal resistance, High internal resistance. 3. Pure nickel Tab Spe:1. Nickel Strip is 015 thickness.

More information about Causin


Similar products



18650 Battery Insulator Ring, 300pcs Self-Adhesive Sturdy Cardboard Stickers Insulators Electrical Insulating Adhesive Paper for Sleeving 18650 Cells

Causin - 99. 96% pure nickel sheet density is 8. 902, melting point :1453, boiling point :2732, Nickel Resistivity: 6.84. 1. Adhesive cardboard paper for 18650 battery insulator. 2. Better protection to avoid short circuit on batteries. Easy peel and stick application. 3. 1. It is pure nickel strip, it is different with tin plated steel strips.

And u can put the pure Nickel tab in saline water at least 24H. U will found it is not rust. 2. Nickel strip is 015 thickness. Width is 8mm. Pure nickel is low internal resistance, High internal resistance. 3. It is especially resistant to the corrosion of acid and alkali, tear resistance and wear resistance. Tear strength, rupture work and dynamic strength are very high.

18650 Battery Insulator Ring, 300pcs Self-Adhesive Sturdy Cardboard Stickers Insulators Electrical Insulating Adhesive Paper for Sleeving 18650 Cells - Spec:1. 18650 battery insulators Electrical Insulating Adhesive Paper is 02mm thickness, outer ring Diameter: 17mm, Inner Ring Diameter: 10mm2.

More information about Causin


Similar products



DIY Battery Pack PVC Heat Shrink Wrap Tube Length 3M Width 250±5MM for Big Battery Pack Power

Causin - Coz i hope i dont waste ur time and hope u have a Happy Shopping!!! 1. It is pure nickel strip, it is different with tin plated steel strips. And u can put the pure Nickel tab in saline water at least 24H. U will found it is not rust. 2. Nickel strip is 015 thickness. Width is 8mm. 3. It is especially resistant to the corrosion of acid and alkali, tear resistance and wear resistance.

Tear strength, rupture work and dynamic strength are very high. 3. 3. Warm reminder :battery heat shrink tubing width is 250±5mm. So pls calculate ur battery pack or mechine size exactly, IF not, it will too big or small. Coz i hope i dont waste ur time and hope u have a Happy Shopping. When exposed to heat in excess of 98 degree for a few seconds, the specially formulated polyvinyl chloride material will shrink rapidly and uniformly conforming to the shape of the object to be covered.

DIY Battery Pack PVC Heat Shrink Wrap Tube Length 3M Width 250±5MM for Big Battery Pack Power - 5. Applications include insulation and jacketing of batteries, sporting goods, toys, electronics, capacitors and similar objects-a vast range of applications in the production of industrial equipment, and consumer products.4.

More information about Causin


Similar products



Finware 10 Pair XT60 XT-60 Male Female Bullet Connectors Power Plugs with Heat Shrink for RC Lipo Battery

Finware - 3. It is especially resistant to the corrosion of acid and alkali, tear resistance and wear resistance. Tear strength, rupture work and dynamic strength are very high. Pure nickel is low internal resistance, High internal resistance. 4. Pvc heat shrink tubing is a thin-wall, low cost material offering good electrical and mechanical characteristics.

5. These original nylon xt60 plugs can handle 60A current for extended periods without exceeding 80DegC thanks to their better contact surface area. When exposed to heat in excess of 98 degree for a few seconds, the specially formulated polyvinyl chloride material will shrink rapidly and uniformly conforming to the shape of the object to be covered.

Finware 10 Pair XT60 XT-60 Male Female Bullet Connectors Power Plugs with Heat Shrink for RC Lipo Battery - 5. Applications include insulation and jacketing of batteries, electronics, sporting goods, toys, capacitors and similar objects-a vast range of applications in the production of industrial equipment, and consumer products.10 pair high quality Female and Male XT60 Connectors. The xt60 ensures a solid high-amp connection, perfect for applications up to and beyond 65A constant.

3. 4. Pure nickel strips are mainly used in the battery welding and soldering field due to the fact that they can easily be soldered and welded; Pure nickel is widely used in our daily life due to its outstanding oxidation resistance, corrosion resistance, low resistance and high conductivity.

More information about Finware


Similar products



BNTECHGO 12 Gauge Silicone Wire Ultra Flexible 20 feet high Temp 200 deg C 600V 12 AWG Silicone Wire 680 Strands of Tinned Copper Wire Stranded Wire Model Battery Cable Black and Red Each Color 10 ft

bntechgo.com SW12G68008F10C2 - 5. 3. Heat shrink 2:1 both red and Black Included - 2 Feet Total. 3. Warm reminder :battery heat shrink tubing width is 250±5mm. So pls calculate ur battery pack or mechine size exactly, IF not, it will too big or small. Coz i hope i dont waste ur time and hope u have a Happy Shopping. Xt-60 connector for rc Lipo Batteries Drones Airplanes Cars Vehicles.

Pure nickel is low internal resistance, High internal resistance. 1. High quality ultra flexible soft Silicone Rubber Copper Wire!Super Low Impedance, Highly Efficient!2. High strand count copper core, 12 AWG silicone stranded wire has 680 strands 008 mm tinned copper wire, the copper strands are tinned, protecting them from corrosion and making it easier to solder.

BNTECHGO 12 Gauge Silicone Wire Ultra Flexible 20 feet high Temp 200 deg C 600V 12 AWG Silicone Wire 680 Strands of Tinned Copper Wire Stranded Wire Model Battery Cable Black and Red Each Color 10 ft - 3. They are constructed with premium silicone rubber insulation. High temperature resistance 200 degree C, Low temperature resistance, in extreme cold -60 degree C. Rated voltage: 600 volts. Outside diameter 4. 5 mm, tolerance +/- 01 mm.

More information about bntechgo.com SW12G68008F10C2


Similar products



DIY Battery Pack PVC Heat Shrink Wrap Tube,Length 3M Flat Width 150±1MM for Big Battery Pack Power

Causin - Heat shrink 2:1 both red and Black Included - 2 Feet Total. 4. Pure nickel strips are mainly used in the battery welding and soldering field due to the fact that they can easily be soldered and welded; Pure nickel is widely used in our daily life due to its outstanding oxidation resistance, corrosion resistance, low resistance and high conductivity.

5. Shrinkable plastic tube sleeve, sporting goods, capacitors and similar objects-a vast range of applications in the production of industrial equipment, Applications include insulation and jacketing of batteries, electronics, toys, and consumer products.4. Pvc heat shrink tubing is a thin-wall, low cost material offering good electrical and mechanical characteristics.

DIY Battery Pack PVC Heat Shrink Wrap Tube,Length 3M Flat Width 150±1MM for Big Battery Pack Power - 1. It is pure nickel strip, it is different with tin plated steel strips. And u can put the pure Nickel tab in saline water at least 24H. U will found it is not rust. 2. Nickel strip is 015 thickness. Width is 8mm.

More information about Causin


Similar products



DIYE Electric Skateboard Power Switch 10AWG ON Off DIY Button Switch Anti-Spark High Voltage High Amp 180A 4-12S Longboard

DIY EMPORIUM LLC - 4. Pure nickel strips are mainly used in the battery welding and soldering field due to the fact that they can easily be soldered and welded; Pure nickel is widely used in our daily life due to its outstanding oxidation resistance, corrosion resistance, low resistance and high conductivity. 5. When exposed to heat in excess of102 degree for a few seconds, the specially formulated polyvinyl chloride material will shrink rapidly andȀ㯸Ȁ㯸 ⾯Ȁ䃸Ȁ䃸 クȀ磸Ȁ磸 ㆯȀ铸Ȁ铸 ㊯Ȁ꛸Ȁ꛸ ㎯Ȁ췸Ȁ췸 㒯Ȁ铹Ȁ铹 㖯Ȁ당Ȁ당 㚯Ȁ볹Ȁ볹 㞯Ȁ퓹Ȁ퓹 㢯 㢯.

3. It is especially resistant to the corrosion of acid and alkali, tear resistance and wear resistance. Tear strength, rupture work and dynamic strength are very high. 5. Shrinkable plastic tube sleeve, sporting goods, electronics, Applications include insulation and jacketing of batteries, toys, capacitors and similar objects-a vast range of applications in the production of industrial equipment, and consumer products.

DIYE Electric Skateboard Power Switch 10AWG ON Off DIY Button Switch Anti-Spark High Voltage High Amp 180A 4-12S Longboard - 4. Pvc heat shrink tubing is a thin-wall, low cost material offering good electrical and mechanical characteristics. High strand count copper core, the copper strands are tinned, 12 AWG silicone stranded wire has 680 strands 008 mm tinned copper wire, protecting them from corrosion and making it easier to solder.

They are constructed with premium silicone rubber insulation.

More information about DIY EMPORIUM LLC


Similar products



Baimeixun 20pcs 4x5 Cell Spacer 18650 Lithium Battery Plastic Holder Bracket

Baimeixun - High strand count copper core, the copper strands are tinned, 12 AWG silicone stranded wire has 680 strands 008 mm tinned copper wire, protecting them from corrosion and making it easier to solder. They are constructed with premium silicone rubber insulation. High temperature resistance 200 degree C, in extreme cold -60 degree C.

Rated voltage: 600 volts. Outside diameter 4. 5 mm, low temperature resistance, tolerance +/- 01 mm. 12 gauge silicone wire kit: 2 colors, red and black, each color 10 ft, total 20 feet. Bntechgo silicone wire are widely used for model planes, electric heating appliances, model ships, meters, model cars, batteries, instruments, household appliances, lamps, motor lead wire and digital fields.

Baimeixun 20pcs 4x5 Cell Spacer 18650 Lithium Battery Plastic Holder Bracket - 1. Heat shrinkable tubing Thicknessl is 015mm, length is 3M. 2. Heating temperature: 80-109 C. 3. Warm reminder :battery heat shrink tubing width is 150±1mm. So pls calculate ur battery pack or mechine size exactly, IF not, it will too big or small.

More information about Baimeixun


Similar products



42V 2A Charger for 36V Ebike Electric Bicycle Li-ion Battery, E-Scooter Power Chair Wheelchair Two-Wheel Vehicle Power Charging Adapter with 3-Pin Male XLR Connector

AC Doctor INC - When exposed to heat in excess of 98 degree for a few seconds, the specially formulated polyvinyl chloride material will shrink rapidly and uniformly conforming to the shape of the object to be covered. 5. Applications include insulation and jacketing of batteries, electronics, toys, sporting goods, capacitors and similar objects-a vast range of applications in the production of industrial equipment, and consumer products.

10 pair high quality Female and Male XT60 Connectors. 3. All products are certified by CE, FCC for safety. 42v 2a universal power supply charger for 36v lithium battery with 3 pin xlr male connector output :42v 2a input: ac100v-240v input voltage: nominal voltage:100V-240Vac Variation Range:90V-264Vac Nominal Frequency:50/60Hz Variation Frequency:47Hz-63Hz Charging Plug Type: XLR Note: 36V is battery voltage and 42V is the charger voltage.

42V 2A Charger for 36V Ebike Electric Bicycle Li-ion Battery, E-Scooter Power Chair Wheelchair Two-Wheel Vehicle Power Charging Adapter with 3-Pin Male XLR Connector - When exposed to heat in excess of102 degree for a few seconds, the specially formulated polyvinyl chloride material will shrink rapidly andȀ㯸Ȁ㯸 ⾯Ȁ䃸Ȁ䃸 クȀ磸Ȁ磸 ㆯȀ铸Ȁ铸 ㊯Ȁ꛸Ȁ꛸ ㎯Ȁ췸Ȁ췸 㒯Ȁ铹Ȁ铹 㖯Ȁ당Ȁ당 㚯Ȁ볹Ȁ볹 㞯Ȁ퓹Ȁ퓹 㢯 㢯. Small 12mm Diameter Switch Footprint.

Latching push-to-make Push-to-break Switch. High quality ultra flexible soft Silicone Rubber Copper Wire!Super Low Impedance, Highly Efficient!4. Pvc heat shrink tubing is a thin-wall, low cost material offering good electrical and mechanical characteristics.

More information about AC Doctor INC


Similar products



24V 20A 7Series BMS Protection Board with Balancing for Lithium Li-ion LiFePO4 Battery Pack

Walfront - 5. Pure nickel is low internal resistance, High internal resistance. Email contact is available 24 hours a day, 7 days a week. Designed for 7 series lithium batteries, manganese acid lithium batteries, can be used for ternary lithium batteries, cobalt acid lithium batteries and LiFePO4 batteries. Multiple protective functions including overcharge protection, overdischarge protection, overcurrent protection and short circuit protection.

High strand count copper core, the copper strands are tinned, 12 AWG silicone stranded wire has 680 strands 008 mm tinned copper wire, protecting them from corrosion and making it easier to solder. They are constructed with premium silicone rubber insulation. High temperature resistance 200 degree C, in extreme cold -60 degree C.

24V 20A 7Series BMS Protection Board with Balancing for Lithium Li-ion LiFePO4 Battery Pack - Rated voltage: 600 volts. Outside diameter 4. 5 mm, low temperature resistance, tolerance +/- 01 mm. 12 gauge silicone wire kit: 2 colors, red and black, each color 10 ft, total 20 feet. Bntechgo silicone wire are widely used for model planes, electric heating appliances, household appliances, model ships, lamps, batteries, instruments, meters, model cars, motor lead wire and digital fields.

More information about Walfront


Similar products