ALLPOWERS 2 Pieces 2.5W 5V/500mAh Solar Panel DIY Battery Charger Kit Mini Encapsulated Solar Cell Epoxy for Battery Power LED 130x150mm Solar Panel Only

#ad
ALLPOWERS 130x150-2 #ad - Backing: PCB 2. Solar panel kit with battery, power small motors or other loads; perfect devices for science project. Use this solar panel to power a convenient appliance with free green energy from the sun. Portable, compact & stylish size with solid attractive casing. The allpowers portable charger allows you to charge your electronic products anywhere at any time.

Uv treated surface and durable weatherproof PCB board. Package contents: 5v 500mah 2. 5w solar panels2 solar panels, totally 5W. Halloween day, development, contact us firstly if you have any question allpowers: always Power Your Life Whenever and Wherever ALLPOWERS is a company in combination with solar and battery application design, special offer for one day only, buy ASAP"Your Satisfaction is our Highest Priority", production and sales.

ALLPOWERS 2 Pieces 2.5W 5V/500mAh Solar Panel DIY Battery Charger Kit Mini Encapsulated Solar Cell Epoxy for Battery Power LED 130x150mm Solar Panel Only #ad - Get the allpowERS charger now. Protective film: pe attention: the bubble on the panel will not affect its normal working, just like the plastic film on the phone Warranty: 18-month product guarantee from ALLPOWERS High-efficiency encapsulated solar panel, you can remove it, providing enough power for DIY.

Technical data for one piece * size:130mm*150mm * Voltage: 5V * Current: 500mAh * Power: 2. 5w * conversion rate: 17% * weight: 92g * Packgae:2 pieces solar panel totally 5W Standard Configuration 1.

More information about ALLPOWERS 130x150-2 #ad

DROK Mini USB DC-DC Step Up Converter 3V to 5V 2A Mobile Power Supply Board with Battery Indicator for Tablet PC iPad iPhone

#ad
DROK 90485 #ad - Charging power supply DIY. Feature: module properties: non-isolated step-up module BOOST Input voltage: 2. 6-5. 5v input current: 0-3a output voltage: 5v output current: 0-2A Operating temperature: -40°c to +85°c Working frequency: 1. 2mhz conversion efficiency: up to 93% short circuit protection: Yes Over-temperature protection: Yes Over-temperature automatic shutdown output Input reverse polarity protection: No please install diode at input port Power indicator: 3.

6v red led light identify resistance: support tablet pc, mp3 installation: two 3mm screws Connection: V-IN input, Phone, USB output Dimensions: 20x20x6.8mm package include: 1x DC-DC Converter Dc 2. 6-5. 5v to 5v 2a non-isolated step up boost module. Max 2a output, up to 93% conversion efficiency. With red green battery indicator, the red led lights up when it lower than 3.

DROK Mini USB DC-DC Step Up Converter 3V to 5V 2A Mobile Power Supply Board with Battery Indicator for Tablet PC iPad iPhone #ad - 6v. With over-current protection, over-temp protection to protect the circuit. Usb output interface, mp3, Ipad, PSP, used for mobile phones, etc.

More information about DROK 90485 #ad


Similar products



DROK Ultra Small Mini DC Power Module DC 3V to 5V 1A USB Battery Converter Step Up Module Charge for MP3/MP4/Phone Samsung Galaxy S3 iPad iPhone 4S 5 6/6 Plus

#ad
DROK 90399 #ad - In order to power your electronic devices when your device needs 5V power supply, when you only have lithium battery, this module can be directly step-up to 5V, solve your problems. Feature: module properties: non-isolated step-up module Input voltage: DC 1-5V It is better that the input voltage greater than 3V.

If the input voltage too low, the module would generate the noises. Package includes: 1x DC-DC Converter Dc 2. 6-5. 5v to 5v 2a non-isolated step up boost module. Max 2a output, up to 93% conversion efficiency. With red green battery indicator, the red led lights up when it lower than 3. 6v. With over-current protection, over-temp protection to protect the circuit.

DROK Ultra Small Mini DC Power Module DC 3V to 5V 1A USB Battery Converter Step Up Module Charge for MP3/MP4/Phone Samsung Galaxy S3 iPad iPhone 4S 5 6/6 Plus #ad - Usb output interface, psP, MP3, Ipad, used for mobile phones, etc. Efficiency: up to 96% the higher the input voltage, the higher the efficiency. Undervoltage indicator: when battery voltage below 2. 7v in load, led will light off; when battery voltage is more than 2. 7v without load, the lED will not light up; when battery voltage less than 2.

7v in load, lED will in dim light.

More information about DROK 90399 #ad


Similar products



5PCS PFM Control DC-DC Converter Step Up Boost Module 600MA USB Charger 0.9V-5V to 5V Power Supply Modul TE110

#ad
SenMod #ad - Enter any DC voltage of 09v~5v, can be stable output 5v dc voltage, single-chip, output current of 500~600 MA, camera, for the mobile phone, digital products supply, Stable output 5V DC voltage. Charging power supply DIY. Electronic circuit requires no electrolytic capacitors and tantalum and it adopt ceramic capacitor.

Features: 1. Efficiency: up to 96% the higher the input voltage, the higher the efficiency. Usb female, can direct power to the USB interface device with USB female versatile 4. Small pfm control DC/DC boost controller chip. Small pfm control DC/DC boost controller chip 2. Small ripple brings little damage to the board.

5PCS PFM Control DC-DC Converter Step Up Boost Module 600MA USB Charger 0.9V-5V to 5V Power Supply Modul TE110 #ad - Undervoltage indicator: when battery voltage below 2. 7v in load, led will light off; when battery voltage is more than 2. 7v without load, the lED will not light up; when battery voltage less than 2. 7v in load, lED will in dim light. Simple wiring connection: connect the IN+ to positive pole of power supply and connect IN- to negative pole of power supply.

Enter any dc voltage of 09v~5v, for the mobile phone, digital products supply, single-chip, can be stable output 5V DC voltage, output current of 500~600 mA, camera, Stable output 5V DC voltage.

More information about SenMod #ad


Similar products



XCSOURCE 5 pcs 1A 5V Micro USB TP4056 Lithium Battery Power Charger Board Module TE420

#ad
XCSOURCE TE420 #ad - After the charging current is large. Undervoltage indicator: when battery voltage below 2. 7v in load, led will light off; when battery voltage is more than 2. 7v without load, the lED will not light up; when battery voltage less than 2. 7v in load, lED will in dim light. Simple wiring connection: connect the IN+ to positive pole of power supply and connect IN- to negative pole of power supply.

High voltage chip fever will automatically reduce the charging current, not to chip burned. Chip at work about 60 degrees fever is normal. Such big connection resistance. Too thin, then rushed over battery voltage out on much. Input voltage: 4. 5~5. 5v. Small ripple brings little damage to the board. Charging power supply DIY.

XCSOURCE 5 pcs 1A 5V Micro USB TP4056 Lithium Battery Power Charger Board Module TE420 #ad - Electronic circuit requires no electrolytic capacitors and tantalum and it adopt ceramic capacitor. This module is used for single-cell lithium or lithium multi-section parallel, charging ports can take power from USB. Pcb size: 34mm x 15. 2mm ultra-small size, installed in a variety of small equipment.

More information about XCSOURCE TE420 #ad


Similar products



yueton Pack of 10 Wire Lead Battery Storage Box Case Holder for 18650 Button Top Single Battery

#ad
yueton #ad - Package includes 10 battery case holders. Input voltage: 4. 5~5. 5v. With spring clip design, you can easily to put the battery in it Dc 2. 6-5. 5v to 5v 2a non-isolated step up boost module. Max 2a output, up to 93% conversion efficiency. With red green battery indicator, the red led lights up when it lower than 3.

6v. With over-current protection, over-temp protection to protect the circuit. Usb output interface, used for mobile phones, PSP, Ipad, MP3, etc. Full charging voltage: 4. 2v. Small ripple brings little damage to the board. Small pfm control DC/DC boost controller chip. Material: plastic and metal. Wire lead battery case for 18650 Color: black Material: plastic and metal Size: 7.

yueton Pack of 10 Wire Lead Battery Storage Box Case Holder for 18650 Button Top Single Battery #ad - 5*2*2cm wire length: approx 13cm This battery box holder with wire connector, fit for 18650 batteries. Undervoltage indicator: when battery voltage below 2. 7v in load, led will light off; when battery voltage is more than 2. 7v without load, the lED will not light up; when battery voltage less than 2. 7v in load, lED will in dim light.

More information about yueton #ad


Similar products



Icstation TC4056A Micro USB 5V 1A 18650 Lithium Battery Charger Board with Over Charge Discharge Protection Pack of 10

#ad
Icstation Micro USB 5V 1A Li-ion Battery Charger #ad - Fulfilled by amazon will take 2-4 days delivery time and shipped by Icstation will take 7-17 days delivery time usually. Input voltage: dc5v, charging cut-off Voltage: 4. 2v±1%, maximum charging Current: 1A. On-board micro usb and soldering joints 5V input`port and charging status indicator red indicator is charging, green indicator is full charged.

Specifications: input Voltage: DC5V Charging Cut-off Voltage: 4. 2v±1% maximum charging current: 1A Battery Over Discharge Protection Voltage: DC2. 5v battery over current protection Current: 3A Board Size: 26 X 17mm/1. 02 x 067inchl*w package included: 10x tc4056a micro usb 5V 1A 18650 Lithium Battery Charger BoardNote:1.

Icstation TC4056A Micro USB 5V 1A 18650 Lithium Battery Charger Board with Over Charge Discharge Protection Pack of 10 #ad - When use this module at first time, there may be no voltage output between OUT+ and OUT-, it need connect the 5V power supply to active the circuit, When the battery disconnect with this module and connect it again also need this step. Enter any dc voltage of 09v~5v, output current of 500~600 ma, for the mobile phone, single-chip, digital products supply, can be stable output 5V DC voltage, camera, Stable output 5V DC voltage.

Usb female, can direct power to the USB interface device with USB female versatile. Micro usb lithium ion / lipo / 18650 battery charging board with overcharge, overdischarge and overcurrent protection. 2.

More information about Icstation Micro USB 5V 1A Li-ion Battery Charger #ad


Similar products



Transformers,12V to 5V Buck Converter, DROK LM2596 Numerical Control Voltage Converter Board DC 5-32V 24v 32v to Adjustable 0-30V 12 v 5 v Switching Regulator Module 1.5A Volt Transformer with Red LED Voltage Tester

#ad
DROK 090029 #ad - Pcb size: 34mm x 15. 2mm ultra-small size, installed in a variety of small equipment. With the same two buttons can set the required value by using the same method. This module is used for single-cell lithium or lithium multi-section parallel, charging ports can take power from USB. It can be used for voltage 3.

6 3. 7v, etc. Press the button will turn off the output voltage. Undervoltage indicator: when battery voltage below 2. 7v in load, led will light off; when battery voltage is more than 2. 7v without load, the lED will not light up; when battery voltage less than 2. 7v in load, lED will in dim light. Simple wiring connection: connect the IN+ to positive pole of power supply and connect IN- to negative pole of power supply.

Transformers,12V to 5V Buck Converter, DROK LM2596 Numerical Control Voltage Converter Board DC 5-32V 24v 32v to Adjustable 0-30V 12 v 5 v Switching Regulator Module 1.5A Volt Transformer with Red LED Voltage Tester #ad - Press the two buttons named + & - to increase or decrease the value, thereby setting the decimal place of output voltage. Press set shortly, the decimal place of output voltage flashes. The two buttons named in & out which are on the left of the digital display can switch between current input voltage and output voltage.

3. Input voltage: 4.

More information about DROK 090029 #ad


Similar products



AKOAK 15amp Diode Axial Schottky Blocking Diodes for Solar Cells Panel,15SQ045 Schottky20Pcs

#ad
AKOAK #ad - Efficiency: up to 96% the higher the input voltage, the higher the efficiency. Material: plastic and metal. Battery over discharge protection voltage: dc2. 5v, battery over current protection Current: 3A, Board Size: 26 X 17mm/1. 02 x 067inch L*W. Small pfm control DC/DC boost controller chip. Full charging voltage: 4.

2v. Undervoltage indicator: when battery voltage below 2. 7v in load, led will light off; when battery voltage is more than 2. 7v without load, the lED will not light up; when battery voltage less than 2. 7v in load, lED will in dim light. Simple wiring connection: connect the IN+ to positive pole of power supply and connect IN- to negative pole of power supply.

AKOAK 15amp Diode Axial Schottky Blocking Diodes for Solar Cells Panel,15SQ045 Schottky20Pcs #ad - Enter any dc voltage of 09v~5v, camera, output current of 500~600 ma, for the mobile phone, digital products supply, single-chip, can be stable output 5V DC voltage, Stable output 5V DC voltage. Usb female, can direct power to the USB interface device with USB female versatile. Meterial:simaximum average forward Current: 15 A MPForward Current at DC10A: 0

55vmaximum dc blocking voltage: 45vPackage Include:20 x Bypass / Blocking Diode Dc 2. 6-5.

More information about AKOAK #ad


Similar products



CHENBO 10 Pcs 5V Micro USB 1A 18650 TP4056 Lithium Battery Charging Board With Protection Charger Module

#ad
CHENBO #ad - Package includes 10 battery case holders. Efficiency: up to 96% the higher the input voltage, the higher the efficiency. Fulfilled by amazon will take 2-4 days delivery time and shipped by Icstation will take 7-17 days delivery time usually. Charging cut-off voltage: 4. 2v ± 1%. 18650, polymer and other lithium battery charge and discharge protection.

Mini usb input terminal with a female, can be directly input to do with the phone charger rechargeable lithium battery, and still retains the input voltage wiring pads, can be very convenient DIY. Wire lead battery case holder for 18650 single battery. Battery type: 18650 Out + and out- connected to the load, such as positive and negative electrodes connected mobile booster plate or other load.

CHENBO 10 Pcs 5V Micro USB 1A 18650 TP4056 Lithium Battery Charging Board With Protection Charger Module #ad - Undervoltage indicator: when battery voltage below 2. 7v in load, led will light off; when battery voltage is more than 2. 7v without load, the lED will not light up; when battery voltage less than 2. 7v in load, lED will in dim light. Simple wiring connection: connect the IN+ to positive pole of power supply and connect IN- to negative pole of power supply.

Micro usb lithium ion / lipo / 18650 battery charging board with overcharge, overdischarge and overcurrent protection.

More information about CHENBO #ad


Similar products



XCSOURCE 10pcs 1A 5V Micro USB TP4056 Lithium Battery Power Charger Board Module TE585

#ad
XCSOURCE TE585 #ad - High voltage protection, the current will be lower than 1000mAh when the voltage is higher than 5V. Current regulation: rprogk - ibatma 30k - 50ma 20k - 70ma 10k - 130ma 5k - 250ma 4k - 300mA 3k - 400mA 2k - 580mA 1. 66k - 690ma 1. 5k - 780ma 1. 33k - 900ma 1. 2k - 1000ma cautions: 1. Package includes 10 battery case holders.

Small pfm control DC/DC boost controller chip. Small ripple brings little damage to the board. Connect the battery to the b + b-, the red light is being charged, inserted into the USB female mobile phone charger, the green light to full. Inputs with micro usb female, can be directly input to do with the phone charger rechargeable lithium battery.

XCSOURCE 10pcs 1A 5V Micro USB TP4056 Lithium Battery Power Charger Board Module TE585 #ad - Input interface: Micro USB Charging Precision: 1. 5% operating temperature: -10 ° c ~ +85 ° C Item Size: Approx. 6. On-board micro usb and soldering joints 5V input`port and charging status indicator red indicator is charging, green indicator is full charged. Please make sure the battery is well connected. Maximum charge current: 1000mA.

Charging power supply DIY.

More information about XCSOURCE TE585 #ad


Similar products