DaFuRui DC-DC Buck Voltage Converter Module,Step Down 6.5-35V to 5V 2A Volt Transformer Stabilizer Voltage Regulator Board with USB Output

#ad
DaFuRui 5824093227 #ad - If you need to install the identification resistor, please cut off the wire connected to D + D- and add it yourself. Package include:  1pcs dc-dc buck Converter After the module is powered on, you can check the voltage in real time. If you need to charge your mobile phone, tablet, MP3, etc. Please press the "output enable" button.

At this time, the usb power indicator is on and the USB output is 5. 0v. If you need to turn off the digital display, press the "Low Power" button. At this point, the module enters the low-power standby mode, and the USB output is turned off accordingly. Please pay attention to the input voltage before use. Net weight: 13g  size:58mm*21mm*10mm(l*w*h) output current capability 5V/2A input voltage to a regulated output voltage of 5.

DaFuRui DC-DC Buck Voltage Converter Module,Step Down 6.5-35V to 5V 2A Volt Transformer Stabilizer Voltage Regulator Board with USB Output #ad - 0v when the 6. 5v-40v features: button output enable button switch USB output, a key low-power button to enter the ultra-low power With self calibration, high accuracy. Please note:  this module defaults to D + D-short, which is compatible with most mobile phones and has reserved a variety of phone identification resistor mounting locations.

Range of voltage meter: DC4. 5v-35v, with self calibration, high accuracy. Voltmeter, step-down voltage converter and 5V USB charger port, versatile and practical.

More information about DaFuRui 5824093227 #ad

GeeBat 10PCS TEC1-12706 Thermoelectric Cooler Heat Sink Heatsink Cooling Peltier 12V 5.8A

#ad
GeeBat 80-096-10 #ad - 40mm x 40mm x 3. 8mm. Operates temperature: -30°C to 83°C. Get ice cold in minutes or heat to boiling by simply reversing the polarity, used for numerous applications from CPU coolers to alternate power sources, or even for your own custom car drink warmer/cooler. Specifications: model: TEC1-12706 Size: Approx.

Cooling power: Qcmax 58-65W. Fitted with 6-inch insulated leads. Each device is full inspected and tested. 40mm x 40mm x 3. 8mm voltage: 12v umax v: 15v cooling power: Qcmax 58-65W Imax A: 5. 8a △tmaxqc=0: up to 65°c operates temperature: -30°c to 83°c power cord: 25-30cm package Included: 10* TEC1-12706 Thermoelectric Cooler Model: tec1-12706 Thermoelectric Cooler.

GeeBat 10PCS TEC1-12706 Thermoelectric Cooler Heat Sink Heatsink Cooling Peltier 12V 5.8A #ad - Feature: 100% Brand new and high quality. These devices must be used in conjunction with a heat sink to avoid burned. Since they consist primarily of semiconductor material sandwiched between ceramic plates and have no moving parts. Fitted with 6-inch insulated leads. Size: approx.

More information about GeeBat 80-096-10 #ad


Similar products



10Pcs TEC1-12706 Thermoelectric Cooler Heat Sink Cooling Peltier Plate Module 12V 5.8A

#ad
SAPPSEN #ad - 100% brand new and high quality. Description: get ice cold in minutes or heat to boiling by simply reversing the polarity, used for numerous applications from CPU coolers to alternate power sources, or even for your own custom car drink warmer/cooler. 40mm x 40mm x 3. 8mm voltage: 12v umax v: 15v cooling power: Qcmax 58-65W Imax A: 5.

8a tmaxqc=0: up to 65°c operates temperature: -30°c to 83°c power cord: 25-30cm these devices must be used in conjunction with a heat sink to avoid burned Each device is full inspected and tested Fitted with 6-inch insulated leads Included: 10 x TEC1-12706 Thermoelectric Cooler Model: tec1-12706 Thermoelectric Cooler.

10Pcs TEC1-12706 Thermoelectric Cooler Heat Sink Cooling Peltier Plate Module 12V 5.8A #ad - Size: approx. Since they consist primarily of semiconductor material sandwiched between ceramic plates and have no moving parts Model: TEC1-12706 Size: Approx. Thermoelectric Cooler. Cooling power: Qcmax 58-65W. Size: approx. Model: tec1-12706. 40mm x 40mm x 3. 8mm. Operates temperature: -30°C to 83°C. 40mm x 40mm x 3.

More information about SAPPSEN #ad


Similar products



DROK DC Buck Module, Adjustable Buck Converter Step Down Voltage Regulator 6V-32V 30V 24V 12V to 1.5-32V 5V 5A LCD Power Supply Volt Reducer Transformer Module Board with USB Port Protective Case

#ad
DROK #ad - Output power: 75w max, recommended use within 50W. Cooling power: Qcmax 58-65W. 100% brand new and high quality. Size: approx. 40mm x 40mm x 3. 8mm. 2. Please reduce the power when voltage difference is large. Operates temperature: -30°C to 83°C. Installation: 8x pillars, 8x 3mm screws Wire Connection: terminal block or soldering terminals; VIN is input; VOUT is output.

DROK DC Buck Module, Adjustable Buck Converter Step Down Voltage Regulator 6V-32V 30V 24V 12V to 1.5-32V 5V 5A LCD Power Supply Volt Reducer Transformer Module Board with USB Port Protective Case #ad - Dimension: 65. 6*40*25mm display Modes: 1. Current regulation can only be performed in the status of constant current. Fitted with 6-inch insulated leads. Size: approx. F-1 mode: display input voltage 3. F-2 mode: display input and output voltage alternately 4. Operating temperature: -20℃ to +70℃ operating frequency: 180khz conversion efficiency: up to 96% Short circuit protection: Yes Constant current value set by constant current function Over-temperature protection: Yes Automatically shut off the output when overtemp.

Input reverse polarity protection: Yes Output backflow prevention: None. 40mm x 40mm x 3. 8mm.

More information about DROK #ad


Similar products



Halnziye 10Gram Thermal Conductive Glue Silicone Plaster Viscous Adhesive Cooling Compound for LED GPU Chipset Heatsink

#ad
Halnziye HY910-T10 #ad - Features: thermal properties, strong adhesion * Melting capacity: 0 200°C/392°F / 24Hours * Evaporation: 0001% 200°c/392°f / 24hours * thermal conductivity:> 1. 2w/m-k * thermal Impedance: 5. 1 * dissipation coefficient 1. 2w/m-K. Idea for mosfet heatsink, vGA CARD Northbridge Southbridge Heatsink.

Strength of connected buildings: 55 lb. Features: thermal properties, strong adhesion. Application: apply to all heatsink no fixed clip thermal paste. Ideal for mosfet heatsink,VGA CARD Northbridge Southbridge Heatsink. Application: apply to all heatsinkf no fixed clip thermal paste.

More information about Halnziye HY910-T10 #ad


Similar products



diymore 10pcs TEC1-12706 12V 60W 6A 40MMX40MM Heatsink Thermoelectric Cooler Cooling Peltier Plate Module

#ad
diymore 12706-10 #ad - diymore 10pcs TEC1-12706 12V 60W 6A 40MMX40MM Heatsink Thermoelectric Cooler Cooling Peltier Plate Module #ad - Refrigeration Power: Qcmax 50-60W. 40mm x 40mm x 3. 8mm. Operates temperature: -30°C to 83°C. The case is packaged unassembled to avoid damage during transit. Fitted with 6-inch insulated leads. Rated voltage: dc12v vmax: 15V; Starting Current 5. 8 a. It needs to be manually installed. Do not use thermal glue between cpU Chip And Heat Sink, use it within 24 hours once opened.

Thermal conductivity:> 1. 2w/m-K. Size: approx. Cooling power: Qcmax 58-65W. Size: 40mm x 40mm x 3. 6mm. Package included: 10x tec1-12706 heatsink thermoelectric Cooler Cooling Peltier Plate Module Model: tec1-12706 Thermoelectric Cooler. Model: tec1-12706. 2. Working Current: 4. 3-4. 6a rated 12v; Imax: 6A. Size: approx.

More information about diymore 12706-10 #ad


Similar products



BNTECHGO 4 Pcs 40mm x 40mm x 11mm Golden Aluminum Heat Sink Cooling Fin 4 Pcs 40mm x 40mm x 0.5mm Silicone Based Thermal Pad

#ad
bntechgo.com NA #ad - Parameter - input voltage range dc 6v-32v; output voltage dc 1. 5v-32v; max output current 5A, recommend use of within 4. 5a; max output power 75W, recommend use of within 50W. General use - as ordinary step-down module with over-current protection; as constant current LED driver module; DIY a solar power controller, etc.

Display - large clear digital LCD display voltage & current value simultaneously. Feature - constant current/voltage mode; voltage calibration & current calibration; USB interface; protective case; short-circuit protection; over-temperature protection; input reverse connection protection. Note - 1. Aluminum heatsink color:Black;Silicone Based Thermal Pad:Good Cooling, Easy Installation.

BNTECHGO 4 Pcs 40mm x 40mm x 11mm Golden Aluminum Heat Sink Cooling Fin 4 Pcs 40mm x 40mm x 0.5mm Silicone Based Thermal Pad #ad - Ideal for mosfet heatsink,VGA CARD Northbridge Southbridge Heatsink. Model: tec1-12706. Size: 40mm x 40mm x 3. 6mm. Operation temperature: -30°C-70°C. Refrigeration Power: Qcmax 50-60W. Working current: 4. 3-4.

More information about bntechgo.com NA #ad


Similar products



DZS Elec Mini DC 5-36V 36V 24V 12V to 5V 3A USB Buck Voltage Converter Regulator Power Supply Module USB Charging Step Down Voltage Module

#ad
DZS Elec #ad - Operates temperature: -30°C to 83°C. Model: tec1-12706. Load capacity: max 3a, high reliability, applied to the mobile power supply, general step-down module, over temperature protection, excellent linear regulation and load regulation, recommend 2A for long time working The module has built-in over-current protection, stable output 5V, short circuit shutdown, iPad etc.

DZS Elec Mini DC 5-36V 36V 24V 12V to 5V 3A USB Buck Voltage Converter Regulator Power Supply Module USB Charging Step Down Voltage Module #ad - Package include: 1pcs dc 5v-36v to 5v 3a usb buck Voltage Converter Model: tec1-12706 Thermoelectric Cooler. Mobile digital products USB 5V power supply equipment. Thermoelectric Cooler. Ideal for mosfet heatsink,VGA CARD Northbridge Southbridge Heatsink. Model: tec1-12706. Size: 40mm x 40mm x 3. 6mm. Operation temperature: -30°C-70°C.

Refrigeration Power: Qcmax 50-60W. Working current: 4. 3-4. 6 a rated 12 v; Imax: 6A. Bntechgo 4 pcs 40mm x 40mm x 11mm golden aluminum heatsink Cooling Fin + 4 Pcs 40mm x 40mm x 05mm silicone Based Thermal Pad.

More information about DZS Elec #ad


Similar products



Elegoo EL-CP-004 120pcs Multicolored Dupont Wire 40pin Male to Female, 40pin Male to Male, 40pin Female to Female Breadboard Jumper Wires Ribbon Cables Kit for arduino

#ad
Elegoo EL-CP-004 #ad - Packing in a color box. We have always cared about the customer experience and improve the product function details. The cables can be separated to form an assembly containing the number of wires you require for your connection and to support non-standard odd-spaced headers. Model: tec1-12706. We’d like to receive your valuable suggestions for our products and make your idea come true.

The case is packaged unassembled to avoid damage during transit. Application: apply to all heatsink no fixed clip thermal paste. Package content:4 pcs 40mm x 40mm x 11mm golden aluminum heatsink cooling Fin + 4 Pcs 40mm x 40mm x 05mm silicone Based Thermal Pad. Note:some scratches may be caused in the production process.

Elegoo EL-CP-004 120pcs Multicolored Dupont Wire 40pin Male to Female, 40pin Male to Male, 40pin Female to Female Breadboard Jumper Wires Ribbon Cables Kit for arduino #ad - Usb female interface output, widely used and more convenient. Rated input: dc 5v-36v; rated Output: DC 5V. Strength of connected buildings: 55 lb. Features: thermal properties, strong adhesion. Cooling power: Qcmax 58-65W. Output voltage is set as around 20v by default, if your input is lower than that, please turn potentiometer anticlockwise for 10 laps or more until voltage changes.

Aluminum heatsink color:Black;Silicone Based Thermal Pad:Good Cooling, Easy Installation.

More information about Elegoo EL-CP-004 #ad


Similar products



ELEGOO for Arduino Nano V3.0, Nano Board CH340/ATmega328P Without USB Cable, Compatible with Arduino Nano V3.0 Nano x 3 Without Cable

#ad
ELEGOO EL-CB-005 #ad - Heat sink size:40mm x 40mm x 11mm / 1. 57" x 1. 57" x 043"l*w*h. The nano is a small, complete, and breadboard-friendly board based on the ATmega328 Arduino Nano 3. X. You could download the driver of Elegoo Nano V3. 0 at: http://bit. Ly/2pmf4in technical specs microcontroller: atmega328 architecture: avr operating voltage: 5 v\ flash memory: 32 kb of which 2 kb used by bootloader sram: 2 kb clock speed: 16 mhz analog i/o pins: 8 eeprom: 1 kb dc current per i/o pins: 40 ma i/o pins input Voltage: 7-12 V Digital I/O Pins: 22 PWM Output: 6 Power Consumption: 19 mA PCB Size: 18 x 45 mm Weight: 7 g Package Include : 3 X Nano Board ATTENTION: We dont have USB cables in this kit and you will need to buy a mini USB cable to use this NANO board.

ELEGOO for Arduino Nano V3.0, Nano Board CH340/ATmega328P Without USB Cable, Compatible with Arduino Nano V3.0 Nano x 3 Without Cable #ad - Output voltage is set as around 20v by default, if your input is lower than that, please turn potentiometer anticlockwise for 10 laps or more until voltage changes. 1 pcs heatsink weight:00124kg. 2. Parameter - input voltage range dc 6v-32v; output voltage dc 1. 5v-32v; max output current 5A, recommend use of within 4.

5a; max output power 75W, recommend use of within 50W. General use - as ordinary step-down module with over-current protection; as constant current LED driver module; DIY a solar power controller, etc.

More information about ELEGOO EL-CB-005 #ad


Similar products



Thermal Paste, 5 Pack ThermalCoolFluxTM High Performance Polysynthetic Silver Thermal Paste

#ad
Bonyx Electronics Mmo-PN-329608954 #ad - 40mm x 40mm x 3. 8mm. Size: approx. Don't compromise - high quality and great value. Try it out - you won't be disappointed! Comes in an easy to use 1. 5g syringe suitable for at least 1 CPU/GPU core. The cables can be separated to form an assembly containing the number of wires you require for your connection and to support non-standard odd-spaced headers.

The power source is automatically selected to the highest voltage source. High thermal conductivity: >3. 2 w/mK. Thermoelectric Cooler. Silver color polysynthetic thermal paste grease. The module has built-in over-current protection, over temperature protection, short circuit shutdown, high reliability. High conversion efficiency, up to 96%.

Thermal Paste, 5 Pack ThermalCoolFluxTM High Performance Polysynthetic Silver Thermal Paste #ad - Mini size is easy to install to all sorts of small equipment, can be used as power source or power supply DIY for mobile digital products which are powered by USB 5V. Each cable length: about 20 cm /8-inch. Model: tec1-12706. The nano is using the chips atmega328p and cH340, not FT232 as official Arduino, so pls.

Operates temperature: -30°C to 83°C. 2.

More information about Bonyx Electronics Mmo-PN-329608954 #ad


Similar products