DC Buck Module, DROK Adjustable Buck Converter Step Down Voltage Regulator 6V-32V 30V 24V 12V to 1.5-32V 5V 5A LCD Power Supply Volt Reducer Transformer Module Board with USB Port Protective Case

DROK - Installation: 8x pillars, 8x 3mm screws Wire Connection: terminal block or soldering terminals; VIN is input; VOUT is output. Operating temperature: -20℃ to +70℃ operating frequency: 180khz conversion efficiency: up to 96% Short circuit protection: Yes Constant current value set by constant current function Over-temperature protection: Yes Automatically shut off the output when overtemp.

Input reverse polarity protection: Yes Output backflow prevention: None. Please reduce the power when voltage difference is large. Output voltage is set as around 20v by default, if your input is lower than that, please turn potentiometer anticlockwise for 10 laps or more until voltage changes. F-2 mode: display input and output voltage alternately 4.

DC Buck Module, DROK Adjustable Buck Converter Step Down Voltage Regulator 6V-32V 30V 24V 12V to 1.5-32V 5V 5A LCD Power Supply Volt Reducer Transformer Module Board with USB Port Protective Case - Over 3a or 35w, please enhance heat dissipation. Constant current requires an output voltage of above 2V to be adjusted. Please add a diode when used for charging. Output power: 75w max, recommended use within 50W. F-0 mode: display output voltage 2. F-1 mode: display input voltage 3. Package included: 1x dc buck module 4x copper cylinder screws m3*6 4x Double-pass Screws M3*12 8x Roundhead Screws M3*6 Parameter - input voltage range dc 6v-32v; output voltage dc 1.

More information about DROK

DROK Buck Boost Board

DROK - Parameters: Input voltage range: DC 5. 5-30v when the input voltage is 5v, the boost and buck can be achieved, but the voltage and current measurement is inaccurate; under 4. 7v, under voltage protection will be activated Output voltage range: DC 05-30v output current: can stably work at 3a for a long time, when enhance heat dissipation can reach 4A Output power: 35W natural cooling, when enhance heat dissipation can reach 50W Voltage display resolution: 0

05v current display resolution: 0005a conversion rate: about 88% soft start: yes, a large power load module may fail when it is started input reverse connection protection: yes Output stop the current from feeding back protection: yes Short circuit protection: yes Working frequency: 180KHZ Size: 66 * 48 * 21mm Mounting hole: 4mm in diameter Package Including: 1x Buck Boost Converter Module Drok buck-boost converter input voltage range is dc 5.

5-30v; output voltage range is dc 05-30v, can be arbitrary adjustable; output current range is 0-3A, if enhance heat dissipation, if enhance dissipation, can be arbitrary adjustable, it can reach 4A; max output power is 35W, it can reach 50W. Lcd display: the voltage regulator module is designed with LCD, output current and output power; voltage display resolution is 0

DROK Buck Boost Board - 05v, can display input and output voltage, current display resolution is 0005a. Safe protection: the volt transformer board is with reverse connection protection at input terminal, reverse connection will not burn; stop the current from feeding back protection at output terminal; short circuit protection.

More information about DROK


Similar products



6 Pack LM2596 DC to DC Buck Converter 3.0-40V to 1.5-35V Power Supply Step Down Module 6 Pack

eBoot EXPSFD005794 - Output: dc 1. 5 v to 35 v voltage is continuously adjustable, maximum output current is 3 A. Drok buck-boost converter input voltage range is dc 5. 5-30v; output voltage range is dc 05-30v, if enhance dissipation, can be arbitrary adjustable; output current range is 0-3A, it can reach 4A; max output power is 35W, if enhance heat dissipation, can be arbitrary adjustable, it can reach 50W.

Lcd display: the voltage regulator module is designed with LCD, output current and output power; voltage display resolution is 005v, can display input and output voltage, current display resolution is 0005a. Safe protection: the volt transformer board is with reverse connection protection at input terminal, reverse connection will not burn; stop the current from feeding back protection at output terminal; short circuit protection.

6 Pack LM2596 DC to DC Buck Converter 3.0-40V to 1.5-35V Power Supply Step Down Module 6 Pack - Application: the switching power supply can be used as an ordinary buck-boost module with over-current protection; used as a battery charger; used as a high-power LED constant current driver module. Button control: button control output voltage ON / OFF status, and you can set the default output state is ON or OFF of the next time power-on.

Input: dc 3 v to 40 v input voltage must be 1. 5 v higher than the output voltage, no boost. Quantity: 6 pieces; size: 45 * 20 * 14 mm with potentiometer. Features: all use sanyo solid-state capacitors, 36 u thickening circuit boards, high-Q inductance with LED indicator output.

More information about eBoot EXPSFD005794


Similar products



Real 18AWG 43x2pcs Copper Strands 10 Pairs DC Power Pigtail Cable Wire, 12V 5A Male & Female Connectors for CCTV Security Camera and Lighting Power Adapter by MILAPEAK 2.1mm x 5.5mm, Ultra Thick

MILAPEAK 57101 - This makes the difference when using with bigger power supplies, as it has heavy gauge with 43 pcs 014 mm 100% copper strands inside one cable, they should be good to 5A or even a touch more with real 18AWG. Safe & rapid transmission】- heavy-duty quality with 43 x 014 mm 100% copper strands brings the reliable, secure connection and rapid transmission.

Excellent performance because of quality materials Heavy-duty quality with 43 x 012mm pure copper wire brings the reliable and secure connection. Drok buck-boost converter input voltage range is dc 5. 5-30v; output voltage range is dc 05-30v, can be arbitrary adjustable, if enhance heat dissipation, if enhance dissipation, can be arbitrary adjustable; output current range is 0-3A, it can reach 4A; max output power is 35W, it can reach 50W.

Lcd display: the voltage regulator module is designed with LCD, output current and output power; voltage display resolution is 005v, can display input and output voltage, current display resolution is 0005a. Safe protection: the volt transformer board is with reverse connection protection at input terminal, reverse connection will not burn; stop the current from feeding back protection at output terminal; short circuit protection.

Real 18AWG 43x2pcs Copper Strands 10 Pairs DC Power Pigtail Cable Wire, 12V 5A Male & Female Connectors for CCTV Security Camera and Lighting Power Adapter by MILAPEAK 2.1mm x 5.5mm, Ultra Thick - Application: the switching power supply can be used as an ordinary buck-boost module with over-current protection; used as a battery charger; used as a high-power LED constant current driver module. Button control: button control output voltage ON / OFF status, and you can set the default output state is ON or OFF of the next time power-on.

More information about MILAPEAK 57101


Similar products



MakerFocus 5pcs Mini Digital DC Voltmeter 0.28 Inch Two-Wire 2.5V-30V Mini Digital DC Voltmeter Voltage Tester Meter 5 Colours

MakerFocus - 5pcs mini digital DC Voltmeter 028 inch two-Wire 2. 5v-30v mini digital dc voltmeter voltage Tester Meter 5 ColoursFeatures:Detection voltage: DC 2. 4v ~ 30vworking current:.

More information about MakerFocus


Similar products



12v to 5v Converter USB, DROK Voltage Buck Regulator DC 9-36V to 5V 5A Power Supply Module Volt Step-Down Transformer Board with Dual USB Output Port

DROK - Output: dc 1. 5 v to 35 v voltage is continuously adjustable, maximum output current is 3 A. Features: all use sanyo solid-state capacitors, 36 u thickening circuit boards, high-Q inductance with LED indicator output. Steps: connect to power source, adjust the swirl button on the blue potentiometer and monitor voltage with multimeter to get the needed voltage The factory have tested these at max voltage so they are very high by default, takes about 15-20 turns CCW before the voltage starts ramping down.

This 18awg dc power pigtail provide a very good reliable DC power connection. What you get】-10 x red/black male pigtails dc power connectors, 10 x red/Black Female Pigtails DC Power Connectors, our 1 Year Free Warranty and Full Refund within 30 Days ensure pleasant shopping experience. Detecting voltage: dc 2.

12v to 5v Converter USB, DROK Voltage Buck Regulator DC 9-36V to 5V 5A Power Supply Module Volt Step-Down Transformer Board with Dual USB Output Port - 4v ~ 30v; operating voltage: 2. 4v ~ 30v; working current:. 18awg dc power pigtail cable provides a more safer DIY solution for DC power connectivity, work with a power adapter or a power supply box. Easy installation】- easy to weld and install, as the ends of the dc power pigtail cables are pre-tinned making them super easy to solder.

They are fairly long too, 11" total, 9. 5" of wire. Compatibility】- easy dc power solution, compatible with all cctv systems and other 2.

More information about DROK


Similar products



Black Menba 3 Sets XT60 Parallel Battery Connector Cable for RC Multicopter Quadcopter

BM - 18awg dc power pigtail cable provides a more safer DIY solution for DC power connectivity, work with a power adapter or a power supply box. Easy installation】- easy to weld and install, as the ends of the dc power pigtail cables are pre-tinned making them super easy to solder. Package include: 3* xt60 parallel battery connector Cable Dual Extension Y Splitter for RC Mode Helicopter Quadcopter Drok buck-boost converter input voltage range is dc 5.

5-30v; output voltage range is dc 05-30v, can be arbitrary adjustable; output current range is 0-3A, it can reach 4A; max output power is 35W, can be arbitrary adjustable, if enhance dissipation, if enhance heat dissipation, it can reach 50W. Lcd display: the voltage regulator module is designed with LCD, output current and output power; voltage display resolution is 0

05v, can display input and output voltage, current display resolution is 0005a. Safe protection: the volt transformer board is with reverse connection protection at input terminal, reverse connection will not burn; stop the current from feeding back protection at output terminal; short circuit protection.

Black Menba 3 Sets XT60 Parallel Battery Connector Cable for RC Multicopter Quadcopter - Application: the switching power supply can be used as an ordinary buck-boost module with over-current protection; used as a battery charger; used as a high-power LED constant current driver module. Button control: button control output voltage ON / OFF status, and you can set the default output state is ON or OFF of the next time power-on.

Input: dc 3 v to 40 v input voltage must be 1.

More information about BM


Similar products



9V Voltage Regulator, DROK DC Buck Converter 5V-23V 12V to 0.01-18V 5V Power Supply Step Down Transformer Module, 3A LCD Volt Stabilizer Circuit Board

DROK - This 18awg dc power pigtail provide a very good reliable DC power connection. What you get】-10 x red/black male pigtails dc power connectors, 10 x red/Black Female Pigtails DC Power Connectors, our 1 Year Free Warranty and Full Refund within 30 Days ensure pleasant shopping experience. Detecting voltage: dc 2.

4v ~ 30v; operating voltage: 2. 4v ~ 30v; working current:. Over 2a, please enhance heat dissipation. Input reverse connection protection: Yes Short-circuit protection: No Accuracy: 001v, 001a display: lcd dual display, 3-digit conversion efficiency: up to 95% varies from input/output voltage/current, voltage difference Load regulation: S I ≤0

9V Voltage Regulator, DROK DC Buck Converter 5V-23V 12V to 0.01-18V 5V Power Supply Step Down Transformer Module, 3A LCD Volt Stabilizer Circuit Board - 8% voltage regulation: S u ≤08% size: 62 x 44 x 18mm Features: 1. 2. This dc volt transformer adopts HD LCD screen, can display voltage and current clearly at the same time. Drok dc/dc converter parameter: input voltage: 5v-23v, recommended within 20v Output voltage: 001-18v continuously adjustable, automatically save the last set voltage value input voltage should be 1V higher than output voltage.

This dc-dc buck converter is with calibration function, don't need to worry if the measurement is not accurate. They are fairly long too, 11" total, 9.

More information about DROK


Similar products



Finware 10 Pair XT60 XT-60 Male Female Bullet Connectors Power Plugs with Heat Shrink for RC Lipo Battery

Finware - Output: dc 1. 5 v to 35 v voltage is continuously adjustable, maximum output current is 3 A. Features: all use sanyo solid-state capacitors, 36 u thickening circuit boards, high-Q inductance with LED indicator output. Quantity: 6 pieces; size: 45 * 20 * 14 mm with potentiometer. These original nylon xt60 plugs can handle 60A current for extended periods without exceeding 80DegC thanks to their better contact surface area.

They are fairly long too, 11" total, 9. 5" of wire. Compatibility】- easy dc power solution, compatible with all cctv systems and other 2. 1*5. 5mm dc power devices like part lighting or led strips. Also features two wires on the other Red Black wire jackets indicate polarity. The xt60 ensures a solid high-amp connection, perfect for applications up to and beyond 65A constant.

Finware 10 Pair XT60 XT-60 Male Female Bullet Connectors Power Plugs with Heat Shrink for RC Lipo Battery - Made from high-temp nylon and gold plated bullet connectors, both included in the injection mold at the time when forming the connector. Steps: connect to power source, adjust the swirl button on the blue potentiometer and monitor voltage with multimeter to get the needed voltage The factory have tested these at max voltage so they are very high by default, takes about 15-20 turns CCW before the voltage starts ramping down.

Real thick 18awg】- real 18awg vs common 22awg, and allows them to be used for higher current devices, real 18awg are bigger wire than other 22awg pigtails, total 86 pcs 0.14 mm copper strands inside the two Red / Black cables.

More information about Finware


Similar products



4-PACK 5A DC-DC Adjustable Buck Converter 4~38v to 1.25-36v Step Down Power Supply High Efficiency Voltage Regulator Module 4-pack 5a buck

D-PLANET 5864305253 - Very versatile. 3. A customer reflects the module output voltage can not be adjusted, always equal to the input voltage. This makes the difference when using with bigger power supplies, as it has heavy gauge with 43 pcs 014 mm 100% copper strands inside one cable, they should be good to 5A or even a touch more with real 18AWG.

Safe & rapid transmission】- heavy-duty quality with 43 x 014 mm 100% copper strands brings the reliable, secure connection and rapid transmission. Quantity: 6 pieces; size: 45 * 20 * 14 mm with potentiometer. Also features two wires on the other Red Black wire jackets indicate polarity. Product features this product is a 180 khz fixed frequency PWM buck step-down DC/DC module, capable of driving a 5A load with high efficiency, low ripple and excellent line and load regulation.

4-PACK 5A DC-DC Adjustable Buck Converter 4~38v to 1.25-36v Step Down Power Supply High Efficiency Voltage Regulator Module 4-pack 5a buck - 2. Adjust the blue potentiometer knob usually clockwise rotation boost, counterclockwise rotationStep-down and monitor the output voltage with a multimeter to reach the required voltage. When you encounter this problem, please first counterclockwise rotation potentiometer 10 laps above, and then use the module can be normal adjustment of the voltage.

Drok buck-boost converter input voltage range is dc 5. 5-30v; output voltage range is dc 05-30v, can be arbitrary adjustable; output current range is 0-3A, if enhance dissipation, can be arbitrary adjustable, if enhance heat dissipation, it can reach 4A; max output power is 35W, it can reach 50W.

More information about D-PLANET 5864305253


Similar products



5 Pack Boost Converter Module XL6009 DC to DC 3.0-30 V to 5-35 V Output Voltage Adjustable Step-up Circuit Board 5 Pack

eBoot EXPSFD005850 - This 18awg dc power pigtail provide a very good reliable DC power connection. What you get】-10 x red/black male pigtails dc power connectors, 10 x red/Black Female Pigtails DC Power Connectors, our 1 Year Free Warranty and Full Refund within 30 Days ensure pleasant shopping experience. Detecting voltage: dc 2.

4v ~ 30v; operating voltage: 2. 4v ~ 30v; working current:. 18awg dc power pigtail cable provides a more safer DIY solution for DC power connectivity, work with a power adapter or a power supply box. Easy installation】- easy to weld and install, as the ends of the dc power pigtail cables are pre-tinned making them super easy to solder.

Specifications dsn6009 booster module nature of the module: unfenced step-up boost rectifying way: synchronous rectifier Input range: 3 V to 32 V Output range: 5 V to 35 V Input current 4 A maximum, no-load 18 mA 5 V input, 8 V output, no-load less than 18 mA. Output: dc 1. 5 v to 35 v voltage is continuously adjustable, maximum output current is 3 A.

5 Pack Boost Converter Module XL6009 DC to DC 3.0-30 V to 5-35 V Output Voltage Adjustable Step-up Circuit Board 5 Pack - Features: all use sanyo solid-state capacitors, 36 u thickening circuit boards, high-Q inductance with LED indicator output. The higher the voltage, the lower the efficiency switching frequency: 400 KHZ Output ripple: 50 mV the higher the voltage, current, the greater the no-load current Conversion efficiency: < 94 % the greater the pressure difference, the ripple is larger Load regulation: plus or minus 0.

5% voltage regulation: plus or minus 05% working temperature: - 40 ℃ to + 85 ℃ overall dimensions: 43 mm x 21 mm to 14 mm length x width x height Attention: do not plug this booster to your project before adjusting the potentiometer.

More information about eBoot EXPSFD005850


Similar products