DC-DC Buck Converter, DROK Step Down Voltage Regulator DC 6V-65V to 0-60V Buck Converter 8A 400W CC CV NC Adjustable Power Supply Volt Reducer Module

#ad
DROK 200220 #ad - Technical parameters: input voltage range: 6-65v output voltage adjusting range: 0-60V Output current adjusting range: 0-8A Output power: 0-400W Output voltage setting resolution: 10mV Output current setting resolution: 10mA Power supply effect: CV< 05%+10mv cc< 1%+10ma load effect: CV< 05%+10mv cc< 1%+10ma output ripple:.

More information about DROK 200220 #ad

DC Buck Converter, DROK DC-DC Step Down Voltage Regulator 10V-75V to 0-60V 12A DKP6012 CC CV Digital Control Volt Reducer Board Power Supply Module

#ad
DROK #ad - Drok step down voltage regulator  product parameters: input voltage range: 10v-75v adjustable output voltage range: 0-60V Adjustable Output Current Range: 0-12A Output Power: 0-720W Output Voltage Setting Resolution: 10mV Output Current Setting Resolution: 10mA Power Supply Effect: CV<05%+10mv  cC.

More information about DROK #ad


Similar products



Drok Numerical Control Regulator DC 8V-60V to 10V-120V 15A Boost Converter, Constant Step Up Module Adjustable Output 48V 24V 12V DC Power Supply with Led Display

#ad
DROK DR-US200150 #ad - Has output out, constant voltage CV and constant current CC indicators; 9. Has a fan to dissipate heat, can work stably for a long term; 3. Has constant voltage and constant current statue; 6. Adopts advanced microprocessor, can regulate output voltage and current accurately; 2. The set voltage and current values can be saved by key.

Uses 4 digits high brightness LED, can display output voltage, current, power and capacity and other parameters; 7. Can be set whether to output automatically when power on; 10 Voltage, current, power, capacity and other parameters can be switched to display automatically or manually; 8. Package includes: 1 x numerical control boost converter drok buck conveter input voltage range is dc 10-75v, adjustable output current range is 0-12A, can be used to convert 24v to 12v 5v, adjustable output voltage range is DC 0-60V, max output power is 720W.

Constant current & voltage: the step down regulator can adjust to constant output voltage, or constant output current by the key. Led disply: our power supply board is with digital LED display, can real-time display voltage, current, capacity and time. Auto output: the dc to dc converter module can be set automatic output after powering on.

Drok Numerical Control Regulator DC 8V-60V to 10V-120V 15A Boost Converter, Constant Step Up Module Adjustable Output 48V 24V 12V DC Power Supply with Led Display #ad - Equipped with cooling fan: the volt reducer comes with a small cooling fan. Dc 8-60v to 10-120v 900w numerical control cc cv step up module with digital tube display, maximum current is 15A, can regulate output Voltage and current accurately, with a fan to dissipate heat; adopts advanced microprocessor, reliable and Stable.

More information about DROK DR-US200150 #ad


Similar products



Power Supply Module, DROK DC to DC Converter 5.3V-32V to 1.2V-32V Step Down Voltage Regulator 12A LCD Volt Transformer 160W CC CV Buck Converter Reducer

#ad
DROK #ad - Wide application, suitable for wind power, dc generator, solar panels to charge battery, you can also make a Step-Up power supply to power devices. Drok power supply module input voltage range is dc 5. 3-32v; output voltage range is dc 1. 2-32v, it can reach 12a; max output power is 120w, can be arbitrary adjustable; output current can be 8A for long term use, if enhance dissipation, if enhance heat dissipation, it can reach 160W.

Lcd display: the buck converter is designed with lcd, output current and output power; voltage display resolution is 005v, can display input and output voltage, current display resolution is 0005a. Safe protection: the voltage regulator module is with reverse connection protection at input terminal, reverse connection will not burn; short circuit protection.

Power Supply Module, DROK DC to DC Converter 5.3V-32V to 1.2V-32V Step Down Voltage Regulator 12A LCD Volt Transformer 160W CC CV Buck Converter Reducer #ad - Application: the volt conversion board can be used as an ordinary buck module with over-current protection; used as a high-power LED constant current driver module; DIY a solar power controller, etc. Button control: button control output voltage ON / OFF status, and you can set the default output state is ON or OFF of the next time power-on.

Please reduce the power when the module is extremely hot. 2. Please make sure that the power of the power supply is greater than the power required by the output load.

More information about DROK #ad


Similar products



DROK DC Buck Module, Adjustable Buck Converter Step Down Voltage Regulator 6V-32V 30V 24V 12V to 1.5-32V 5V 5A LCD Power Supply Volt Reducer Transformer Module Board with USB Port Protective Case

#ad
DROK #ad - F-2 mode: display input and output voltage alternately 4. Dimension: 65. 6*40*25mm display Modes: 1. Installation: 8x pillars, 8x 3mm screws Wire Connection: terminal block or soldering terminals; VIN is input; VOUT is output. Wide application, solar panels to charge battery, suitable for wind power, dc generator, you can also make a Step-Up power supply to power devices.

Drok power supply module input voltage range is dc 5. 3-32v; output voltage range is dc 1. 2-32v, if enhance heat dissipation, it can reach 12a; max output power is 120W, can be arbitrary adjustable; output current can be 8A for long term use, if enhance dissipation, it can reach 160W. Lcd display: the buck converter is designed with lcd, output current and output power; voltage display resolution is 0

DROK DC Buck Module, Adjustable Buck Converter Step Down Voltage Regulator 6V-32V 30V 24V 12V to 1.5-32V 5V 5A LCD Power Supply Volt Reducer Transformer Module Board with USB Port Protective Case #ad - 05v, can display input and output voltage, current display resolution is 0005a. Safe protection: the voltage regulator module is with reverse connection protection at input terminal, reverse connection will not burn; short circuit protection. Application: the volt conversion board can be used as an ordinary buck module with over-current protection; used as a high-power LED constant current driver module; DIY a solar power controller, etc.

Button control: button control output voltage ON / OFF status, and you can set the default output state is ON or OFF of the next time power-on. Parameter - input voltage range dc 6v-32v; output voltage dc 1.

More information about DROK #ad


Similar products



Boost Voltage Converter, DROK 1500W Voltage Regulator Booster DC 10-60V Step Up to 12-90V 20A Input Power Supply Module Volt Transformer Circuit Board

#ad
DROK #ad - 2. Solar panel regulator. As the car power supply, charge for your laptop, PDA or a variety of digital products. Diy a notebook mobile power supply: with 12V big-capacity lithium battery pack, get your notebook on anywhere. It needs to be manually installed. Drok boost voltage converter input voltage range is dc 10-60v, max output current is 20A, max input current is 30A; continuously adjustable output voltage range is DC 12-90V, more than 15A please enhance heat dissipation.

Application: diy a power supply, input 12v and output can be 12-90V adjustable; used as the car power supply, charge for your laptop, PDA or a variety of digital products; used as a solar panel regulator, etc. Protection: this step-up power regulator is designed with input over-current protection, battery low voltage protection, input MOS reverse polarity protection, short circuit protection.

Special design: the voltage transformer is equipped with thickening radiator and intelligent temperature control cooling fan. Note: when using battery, solar panel, switching power supply, or generator as input power, please it is necessary to decrease the battery protection voltage value. Drok 1500w boost voltage converter parameters: module type: non-isolated step-up module boost input voltage range: dc 10v~60v input current: 10~30v input voltage, the current will increase Output voltage: 12~90V continuously adjustable default 19V Output current: 20A MAX, maximum current 30A; 31~60V input voltage, the higher the output voltage, maximum current 25A Static operating current: 15 mA when 12V step up to 20V, more than 15A please enhance heat dissipation Constant current range: 0.

Boost Voltage Converter, DROK 1500W Voltage Regulator Booster DC 10-60V Step Up to 12-90V 20A Input Power Supply Module Volt Transformer Circuit Board #ad - 8~20a ±03a temperature: -40~ + 85℃if the ambient temperature is too high, battery low voltage protection, please enhance heat dissipation Operating frequency: 150 KHz Conversion efficiency: 92% ~ 97% Protection: input over-current protection, input reverse polarity protection, short circuit protection Installation: 4 x 3 mm screw holes Module sizeL*W*H: 130 x 52 x 85 mm Applications: 1.

More information about DROK #ad


Similar products



2Pcs 3S 11.1V 12.6V 25A W/Balance 18650 Li ion Lithium Battery PCB Protection Board

#ad
daier Z370*2 #ad - Over discharge voltage range: 2. 3 3. 0v¡À005v. It needs to be manually installed. Drok boost voltage converter input voltage range is dc 10-60v, max output current is 20A, max input current is 30A; continuously adjustable output voltage range is DC 12-90V, more than 15A please enhance heat dissipation. Application: diy a power supply, charge for your laptop, PDA or a variety of digital products; used as a solar panel regulator, input 12v and output can be 12-90V adjustable; used as the car power supply, etc.

Protection: this step-up power regulator is designed with input over-current protection, battery low voltage protection, input MOS reverse polarity protection, short circuit protection. Special design: the voltage transformer is equipped with thickening radiator and intelligent temperature control cooling fan.

2Pcs 3S 11.1V 12.6V 25A W/Balance 18650 Li ion Lithium Battery PCB Protection Board #ad - Note: when using battery, or generator as input power, switching power supply, solar panel, please it is necessary to decrease the battery protection voltage value. Please buyers know the professional knowledge of this module before buying. Do not mix the good battery and the battery. Output voltage is set as around 20v by default, if your input is lower than that, please turn potentiometer anticlockwise for 10 laps or more until voltage changes.

The internal resistance of 3 battery capacity are closer will be better. Product description features: 100% Brand New and High Quality Strictly according to the diagram wiring: 0VB 3.

More information about daier Z370*2 #ad


Similar products



eBoot 6 Pack LM2596 DC to DC Buck Converter 3.0-40V to 1.5-35V Power Supply Step Down Module 6 Pack

#ad
eBoot EXPSFD005794 #ad - The case is packaged unassembled to avoid damage during transit. Maximum transient current: 34 40A. Input: dc 3 v to 40 v input voltage must be 1. 5 v higher than the output voltage, no boost. Material: PCB. Quantity: 6 pieces; size: 45 * 20 * 14 mm with potentiometer. Keep it under 2. 5 a and use the heat sink when working for long hours.

Maximum operating current: 0 25A. 2. Output: dc 1. 5 v to 35 v voltage is continuously adjustable, maximum output current is 3 A. Over discharge voltage range: 2. 3 3. 0v¡À005v. Drok buck conveter input voltage range is dc 10-75v, can be used to convert 24v to 12v 5v, adjustable output current range is 0-12A, adjustable output voltage range is DC 0-60V, max output power is 720W.

eBoot 6 Pack LM2596 DC to DC Buck Converter 3.0-40V to 1.5-35V Power Supply Step Down Module 6 Pack #ad - Constant current & voltage: the step down regulator can adjust to constant output voltage, or constant output current by the key. Led disply: our power supply board is with digital LED display, can real-time display voltage, current, capacity and time. Auto output: the dc to dc converter module can be set automatic output after powering on.

Equipped with cooling fan: the volt reducer comes with a small cooling fan.

More information about eBoot EXPSFD005794 #ad


Similar products



eBoot 10 Pack LM2596 DC to DC Buck Converter 3.0-40V to 1.5-35V Power Supply Step Down Module 10 Pack

#ad
eBoot #ad - 10 pack lm2596 dc to dc buck converter 3. 0-40v to 1. 5-35v power supply step down module Features: Input: DC 3 V to 40 V input voltage must be 1. 5 v higher than the output voltage, no boost Output: DC 1. 5 v to 35 v voltage is continuously adjustable, maximum output current is 3 A Instructions: Connect it to an electrical power source 3 - 40 v.

Material: PCB. Steps: connect to power source, adjust the swirl button on the blue potentiometer and monitor voltage with multimeter to get the needed voltage The factory have tested these at max voltage so they are very high by default, takes about 15-20 turns CCW before the voltage starts ramping down.

Maximum transient current: 34 40A. It needs to be manually installed. Drok boost voltage converter input voltage range is dc 10-60v, max input current is 30A; continuously adjustable output voltage range is DC 12-90V, max output current is 20A, more than 15A please enhance heat dissipation. Application: diy a power supply, input 12v and output can be 12-90V adjustable; used as the car power supply, charge for your laptop, PDA or a variety of digital products; used as a solar panel regulator, etc.

eBoot 10 Pack LM2596 DC to DC Buck Converter 3.0-40V to 1.5-35V Power Supply Step Down Module 10 Pack #ad - Protection: this step-up power regulator is designed with input over-current protection, input MOS reverse polarity protection, battery low voltage protection, short circuit protection. Special design: the voltage transformer is equipped with thickening radiator and intelligent temperature control cooling fan.

Note: when using battery, switching power supply, or generator as input power, solar panel, please it is necessary to decrease the battery protection voltage value.

More information about eBoot #ad


Similar products



Finware 10 Pair XT60 XT-60 Male Female Bullet Connectors Power Plugs with Heat Shrink for RC Lipo Battery

#ad
Finware #ad - Input: dc 3 v to 40 v input voltage must be 1. 5 v higher than the output voltage, no boost. Quantity: 10 pieces; size: 45 x 20 x 14 mm with potentiometer. Material: PCB. 60 amp current Handling Bullet Connectors. Maximum operating current: 0 25A. Output: dc 1. 5 v to 35 v voltage is continuously adjustable, maximum output current is 3 A.

Steps: connect to power source, adjust the swirl button on the blue potentiometer and monitor voltage with multimeter to get the needed voltage The factory have tested these at max voltage so they are very high by default, takes about 15-20 turns CCW before the voltage starts ramping down. Features: all use sanyo solid-state capacitors, 36 u thickening circuit boards, high-Q inductance with LED indicator output.

Finware 10 Pair XT60 XT-60 Male Female Bullet Connectors Power Plugs with Heat Shrink for RC Lipo Battery #ad - Wide application, solar panels to charge battery, dc generator, suitable for wind power, you can also make a Step-Up power supply to power devices. Drok power supply module input voltage range is dc 5. 3-32v; output voltage range is dc 1. 2-32v, it can reach 12a; max output power is 120w, if enhance dissipation, if enhance heat dissipation, can be arbitrary adjustable; output current can be 8A for long term use, it can reach 160W.

Lcd display: the buck converter is designed with lcd, output current and output power; voltage display resolution is 005v, can display input and output voltage, current display resolution is 0005a.

More information about Finware #ad


Similar products



5 Pack Boost Converter Module XL6009 DC to DC 3.0-30 V to 5-35 V Output Voltage Adjustable Step-up Circuit Board 5 Pack

#ad
eBoot EXPSFD005850 #ad - Wide application, solar panels to charge battery, dc generator, suitable for wind power, you can also make a Step-Up power supply to power devices. Drok power supply module input voltage range is dc 5. 3-32v; output voltage range is dc 1. 2-32v, can be arbitrary adjustable; output current can be 8A for long term use, if enhance heat dissipation, it can reach 12A; max output power is 120W, if enhance dissipation, it can reach 160W.

Lcd display: the buck converter is designed with lcd, output current and output power; voltage display resolution is 005v, can display input and output voltage, current display resolution is 0005a. Safe protection: the voltage regulator module is with reverse connection protection at input terminal, reverse connection will not burn; short circuit protection.

5 Pack Boost Converter Module XL6009 DC to DC 3.0-30 V to 5-35 V Output Voltage Adjustable Step-up Circuit Board 5 Pack #ad - Application: the volt conversion board can be used as an ordinary buck module with over-current protection; used as a high-power LED constant current driver module; DIY a solar power controller, etc. Button control: button control output voltage ON / OFF status, and you can set the default output state is ON or OFF of the next time power-on.

Parameter - input voltage range dc 6v-32v; output voltage dc 1. 5v-32v; max output current 5A, recommend use of within 4. 5a; max output power 75W, recommend use of within 50W. General use - as ordinary step-down module with over-current protection; as constant current LED driver module; DIY a solar power controller, etc.

More information about eBoot EXPSFD005850 #ad


Similar products