DC-DC Buck, DROK Power Supply Module LM2596 DC Buck Converter 5V-36V to 1.25-32V Step Down Voltage Regulator Stabilizer 3A 5A CC Volt Transformer Reducer

#ad
DROK #ad - 6. With usb port, can directly charge for your digital device. If the voltage difference is big, please reduce power operating temperature: -40 ~ +85℃ operating frequency: 180khz conversion efficiency : up to 96% Short circuit protection: Yes Overtemperature protection: Yes automatically shut off the output when over-temperature Input reverse polarity protection: No please add large-current diode at input if necessary Installation: 4x 3mm screws Wiring: solder terminals V-IN is input, V-OUT is output.

2. Drok dc-dc step down converter parameters: name: dc-dc power supply voltage step down buck converter module Input voltage : 5V-36V input should at least 1. 5v higher than output Output voltage :1. 25-32v continuously adjustable, defaulted 17V Output current : 5A max recommended within 4. 5a output power: 75W max Recommended within 50W.

DC-DC Buck, DROK Power Supply Module LM2596 DC Buck Converter 5V-36V to 1.25-32V Step Down Voltage Regulator Stabilizer 3A 5A CC Volt Transformer Reducer #ad - With indicator light to indicate CC/CV mode & charging status. Feature: 1. Used to diy a solar power controller; 3. With protective case. 5. Package included: 1x dc-dc buck converter Parameter - input voltage range dc 5v-36v; output voltage dc 1.

More information about DROK #ad

DROK DC Buck Module, Adjustable Buck Converter Step Down Voltage Regulator 6V-32V 30V 24V 12V to 1.5-32V 5V 5A LCD Power Supply Volt Reducer Transformer Module Board with USB Port Protective Case

#ad
DROK #ad - F-1 mode: display input voltage 3. Dimension: 65. 6*40*25mm display Modes: 1. Output power: 75w max, recommended use within 50W. Package included: 1x dc buck module 4x copper cylinder screws m3*6 4x Double-pass Screws M3*12 8x Roundhead Screws M3*6 Parameter - input voltage range dc 6v-32v; output voltage dc 1.

5v-32v; max output current 5A, recommend use of within 4. 5a; max output power 75W, recommend use of within 50W. General use - as ordinary step-down module with over-current protection; as constant current LED driver module; DIY a solar power controller, etc. Display - large clear digital LCD display voltage & current value simultaneously.

Feature - constant current/voltage mode; voltage calibration & current calibration; USB interface; protective case; short-circuit protection; over-temperature protection; input reverse connection protection. Note - 1. Usb mode: display usb output voltage & turn on/off usb output Note: Output is set as around 20V before leaving factory, if your input is lower than that, please turn potentiometer anticlockwise for at least 10 laps until voltage changes.

DROK DC Buck Module, Adjustable Buck Converter Step Down Voltage Regulator 6V-32V 30V 24V 12V to 1.5-32V 5V 5A LCD Power Supply Volt Reducer Transformer Module Board with USB Port Protective Case #ad - Over 3a or 35w, please enhance heat dissipation. Constant current requires an output voltage of above 2V to be adjusted. F-0 mode: display output voltage 2. Output voltage is set as around 20v by default, if your input is lower than that, please turn potentiometer anticlockwise for 10 laps or more until voltage changes.

More information about DROK #ad


Similar products



2-pack LM2596s Buck Converter DC to DC Step-down Voltage Regulator Power Module 36V 24V 12V to 5V 2A Voltage Stabilizer with LED Display 

#ad
D-PLANET SG_B07CVBG8CT_US #ad - Output: dc 1. 25v to 37v voltage is continuously adjustable. The case is packaged unassembled to avoid damage during transit. 2. Press the button in a short time 1 second to adjust the valuerange from -05~05v, positive means to  rises units, negative means to minus units Due to a unit is less than 01v, so you have to continuously press 1 to 5 times to see the voltmeter change 0

1v 3. Long press the button for more than 2 seconds and then release to enter the output voltage calibration mode. You can request a refund for any single module and no need to return it. Any problems you can contact us and we will try our best to resolve it till you satisfied. 4. Long press the button between 1 and 4 seconds to turn off the voltmeter.

2-pack LM2596s Buck Converter DC to DC Step-down Voltage Regulator Power Module 36V 24V 12V to 5V 2A Voltage Stabilizer with LED Display  #ad - Parameter - input voltage range dc 6v-32v; output voltage dc 1. 5v-32v; max output current 5A, recommend use of within 4. 5a; max output power 75W, recommend use of within 50W. General use - as ordinary step-down module with over-current protection; as constant current LED driver module; DIY a solar power controller, etc.

Display - large clear digital LCD display voltage & current value simultaneously. Feature - constant current/voltage mode; voltage calibration & current calibration; USB interface; protective case; short-circuit protection; over-temperature protection; input reverse connection protection.

More information about D-PLANET SG_B07CVBG8CT_US #ad


Similar products



eBoot 6 Pack LM2596 DC to DC Buck Converter 3.0-40V to 1.5-35V Power Supply Step Down Module 6 Pack

#ad
eBoot EXPSFD005794 #ad - It needs to be manually installed. Input:dc 4v to 40v input voltage should be 1. 5v higher than the output voltage. The case is packaged unassembled to avoid damage during transit. Parameter - input voltage range dc 6v-32v; output voltage dc 1. 5v-32v; max output current 5A, recommend use of within 4. 5a; max output power 75W, recommend use of within 50W.

General use - as ordinary step-down module with over-current protection; as constant current LED driver module; DIY a solar power controller, etc. Display - large clear digital LCD display voltage & current value simultaneously. Feature - constant current/voltage mode; voltage calibration & current calibration; USB interface; protective case; short-circuit protection; over-temperature protection; input reverse connection protection.

eBoot 6 Pack LM2596 DC to DC Buck Converter 3.0-40V to 1.5-35V Power Supply Step Down Module 6 Pack #ad - Note - 1. Output: dc 1. 25v to 37v voltage is continuously adjustable. Quantity: 6 pieces; size: 45 * 20 * 14 mm with potentiometer. High conversion efficiency, rotate the top screw of potentiometer clockwise to boost, simple regulating operation, anti clockwise to reduce voltage.100% satisfication service: if there are any problem with our products, please feel free to contact us.

Steps: connect to power source, adjust the swirl button on the blue potentiometer and monitor voltage with multimeter to get the needed voltage The factory have tested these at max voltage so they are very high by default, takes about 15-20 turns CCW before the voltage starts ramping down.

More information about eBoot EXPSFD005794 #ad


Similar products



PEMENOL DC Buck Converter 5.5-30V to 0.5-30V 60W 5A Constant Current Constant Voltage Adjustable Step Up Down Power Supply Module Voltage Regulator with Cooling Fan LCD Display

#ad
PEMENOL #ad - You can request a refund for any single module and no need to return it. Any problems you can contact us and we will try our best to resolve it till you satisfied. Input: dc 3 v to 40 v input voltage must be 1. 5 v higher than the output voltage, no boost. Output: dc 1. 25v to 37v voltage is continuously adjustable.

Output voltage is set as around 20v by default, if your input is lower than that, please turn potentiometer anticlockwise for 10 laps or more until voltage changes. Steps: connect to power source, adjust the swirl button on the blue potentiometer and monitor voltage with multimeter to get the needed voltage The factory have tested these at max voltage so they are very high by default, takes about 15-20 turns CCW before the voltage starts ramping down.

PEMENOL DC Buck Converter 5.5-30V to 0.5-30V 60W 5A Constant Current Constant Voltage Adjustable Step Up Down Power Supply Module Voltage Regulator with Cooling Fan LCD Display #ad - High conversion efficiency, rotate the top screw of potentiometer clockwise to boost, simple regulating operation, anti clockwise to reduce voltage.100% satisfication service: if there are any problem with our products, please feel free to contact us. Can effectively reduce the temperature of the project under load.

Button control: the button controls the output on/off status, and you can set the next power-on default state to ON or OFF. 2. Parameter - input voltage range dc 6v-32v; output voltage dc 1. 5v-32v; max output current 5A, recommend use of within 4.

More information about PEMENOL #ad


Similar products



Zixtec 10 Pack LM2596 DC-DC Buck Converter Step Down Module Power Supply DIP Output 1.25V-30V 3A

#ad
Zixtec #ad - Updated version: with reverse voltage protection, over-temperature and short-circuit protection, thus making it much safer to use. When the current is greater than 3a or the power is greater than 20W or the temperature is greater than 40 °C, the cooling fan will start working. Output: dc 1. 5 v to 35 v voltage is continuously adjustable, maximum output current is 3 A.

Electrical parameters: Input: DC 3. 2v to 35v input voltage must be more than the output voltage can not be higher than boost 1. 25v. Output: 1. 25v to 30v dc voltage is continuously adjustable, high efficiency and maximum output current of 3A. Welding, welded directly to the power line input output port; 2. Output current maximum: 6A Output power maximum: 60W.

Zixtec 10 Pack LM2596 DC-DC Buck Converter Step Down Module Power Supply DIP Output 1.25V-30V 3A #ad - Safe protection: input can be reversed, reverse connection will not burn; anti backflow at Output; short circuit protection: can directly short-circuit the Output; temperature protection: 100℃. Powerful cooling: the buck converter has a smart cooling fan. Package included:  10pcs  x  lm2596s module Parameter - input voltage range dc 6v-32v; output voltage dc 1.

5v-32v; max output current 5A, recommend use of within 4. 5a; max output power 75W, recommend use of within 50W.

More information about Zixtec #ad


Similar products



Buck Converter 12v to 5v, DROK Voltage Regulator Board DC 6.5-36V Step Down to DC 1.2V-32V Volt Transformer Reducer 4.5A 75W CC CV Power Supply Module

#ad
DROK #ad - When the input voltage is 5v, the buck-boost can also be realized, but the voltage and current measurement is not accurate; when it is lower than 4. 7v, the under-voltage protection will work. The input in- can't short-circuit to the output OUT-, otherwise, the constant current function will not work. High-q inductors with high power output LED indicator.

Can effectively reduce the temperature of the project under load. Button control: the button controls the output on/off status, and you can set the next power-on default state to ON or OFF. Output voltage is set as around 20v by default, if your input is lower than that, please turn potentiometer anticlockwise for 10 laps or more until voltage changes.

Buck Converter 12v to 5v, DROK Voltage Regulator Board DC 6.5-36V Step Down to DC 1.2V-32V Volt Transformer Reducer 4.5A 75W CC CV Power Supply Module #ad - Output: dc 1. 25v to 37v voltage is continuously adjustable. Please read the instructions carefully before using it. When the current is greater than 3a or the power is greater than 20W or the temperature is greater than 40 °C, the cooling fan will start working. Package included: 1 x buck converter 12v to 5v Parameter - input voltage range dc 6v-32v; output voltage dc 1.

5v-32v; max output current 5A, recommend use of within 4. 5a; max output power 75W, recommend use of within 50W. General use - as ordinary step-down module with over-current protection; as constant current LED driver module; DIY a solar power controller, etc.

More information about DROK #ad


Similar products



AUSTOR 840 Pieces Preformed Breadboard Jumper Wire Kit 14 Lengths Assorted Jumper Wire for Breadboard Prototyping Solder Circuits

#ad
AUSTOR #ad - Product warranty austor direct customer service Team is dedicated to offering our valued customers a great and professional services - Timely email reply, Helpful solutions, Refund & Return Warranty. When the current is greater than 3a or the power is greater than 20W or the temperature is greater than 40 °C, the cooling fan will start working.

All austor products supply 45 days money-back & 18-month warranty. Features: all use sanyo solid-state capacitors, 36 u thickening circuit boards, high-Q inductance with LED indicator output. Output: dc 1. 25v to 37v voltage is continuously adjustable. Power supply module input voltage range: dc 5. 5-30v; output voltage range: dc 0

AUSTOR 840 Pieces Preformed Breadboard Jumper Wire Kit 14 Lengths Assorted Jumper Wire for Breadboard Prototyping Solder Circuits #ad - 5-30v. Application: used as a normal buck-boost module with overcurrent protection, as a high-power LED constant current drive module, as a battery charger. Input voltage range: dc 3. 2v to 35v input voltage must be higher than the voltage output to 1. 5v or more can not be boosted. Output: 1. 25v to 30v dc voltage is continuously adjustable, high efficiency and maximum output current of 3A.

More information about AUSTOR #ad


Similar products



18awg Electronic Wire Kit,Flexible Silicone Wire 6 Color 18 Gauge Hook Up Wire6 different colored 13 Feet spools 600V Stranded Wire automotive wiring

#ad
TUOFENG #ad - Steps: connect to power source, adjust the swirl button on the blue potentiometer and monitor voltage with multimeter to get the needed voltage The factory have tested these at max voltage so they are very high by default, takes about 15-20 turns CCW before the voltage starts ramping down. 2. Power supply module input voltage range: dc 5.

5-30v; output voltage range: dc 05-30v. When the input voltage is 5v, the buck-boost can also be realized, but the voltage and current measurement is not accurate; when it is lower than 4. 7v, the under-voltage protection will work. Nominal voltage: 600v testing voltage:2000v temperature range:-60 Deg C to 200 Deg C Conductor: Tinned Copper OD Tolerance: ±0

18awg Electronic Wire Kit,Flexible Silicone Wire 6 Color 18 Gauge Hook Up Wire6 different colored 13 Feet spools 600V Stranded Wire automotive wiring #ad - 1mm insulator: silicone conductor: 1 Gauge:18AWG 2 Copper Number/Wire Diameter:150/008mm 3 diameter: ∮1. 19mm insulator: 1 Jacket Thick:055mm 2 over Diameter:2. 3mm bear Current:7. 5a parameter - input voltage range dc 6v-32v; output voltage dc 1. 5v-32v; max output current 5A, recommend use of within 4.

5a; max output power 75W, recommend use of within 50W.

More information about TUOFENG #ad


Similar products



EDGELEC 100pcs 5mm RGB Tri-Color Red Green Blue Multicolor 4Pin LED Diodes Common Cathode Diffused Round Lens 29mm Long Lead +300pcs Resistors for DC 6-12V Included,Light Emitting Diodes

#ad
EDGELEC #ad - The case is packaged unassembled to avoid damage during transit. Quantity: 6 pieces; size: 45 * 20 * 14 mm with potentiometer. Output: dc 1. 5 v to 35 v voltage is continuously adjustable, maximum output current is 3 A. It needs to be manually installed. Input:dc 4v to 40v input voltage should be 1. 5v higher than the output voltage.

Product features: tri-color red/Geen/Blue Lights / Common Cathode / 5mm Diffused Round Lens. Output voltage is set as around 20v by default, if your input is lower than that, please turn potentiometer anticlockwise for 10 laps or more until voltage changes. Parameter - input voltage range dc 6v-32v; output voltage dc 1.

EDGELEC 100pcs 5mm RGB Tri-Color Red Green Blue Multicolor 4Pin LED Diodes Common Cathode Diffused Round Lens 29mm Long Lead +300pcs Resistors for DC 6-12V Included,Light Emitting Diodes #ad - 5v-32v; max output current 5A, recommend use of within 4. 5a; max output power 75W, recommend use of within 50W. General use - as ordinary step-down module with over-current protection; as constant current LED driver module; DIY a solar power controller, etc. Display - large clear digital LCD display voltage & current value simultaneously.

Feature - constant current/voltage mode; voltage calibration & current calibration; USB interface; protective case; short-circuit protection; over-temperature protection; input reverse connection protection. Note - 1. Please install it after receiving.

More information about EDGELEC #ad


Similar products



DZS Elec DC-DC Buck Boost Converter Module 5.5-30V 12v to 0.5-30V 5v 24v Adjustable Step Down Up Voltage Regulator Constant Current Voltage 3A 35W Power Supply with LCD Display

#ad
#ad - Package include: 1pc step-down/up power Converter Module Parameter - input voltage range dc 6v-32v; output voltage dc 1. 5v-32v; max output current 5A, recommend use of within 4. 5a; max output power 75W, recommend use of within 50W. General use - as ordinary step-down module with over-current protection; as constant current LED driver module; DIY a solar power controller, etc.

Display - large clear digital LCD display voltage & current value simultaneously. Feature - constant current/voltage mode; voltage calibration & current calibration; USB interface; protective case; short-circuit protection; over-temperature protection; input reverse connection protection. Note - 1. High-q inductors with high power output LED indicator.

DZS Elec DC-DC Buck Boost Converter Module 5.5-30V 12v to 0.5-30V 5v 24v Adjustable Step Down Up Voltage Regulator Constant Current Voltage 3A 35W Power Supply with LCD Display #ad - Output indicator: constant current indicator light, output indicator light Voltage Display Resolution: 005v current Display Resolution: 0005a transfer Efficiency: Approx. Short press on/off to control output ON or OFF, long press to set the default output state ON or OFF. 88% soft start: yes high power load module may fail when started input reverse protection: YES Output Anti-Backflow: YES, No additional anti-backflow diode is required for battery charging Short Circuit Protection: YES, After short circuit protection, the module automatically shuts down the output, and be restored after re-energizing.

Quantity: 6 pieces; size: 45 * 20 * 14 mm with potentiometer.

More information about #ad


Similar products