DCC Battery Tmenperature Sensor for DC to DC On-Board Battery Charger

#ad
RTSDCC-G1 #ad - This temperature sensor is compatible with Renogy 12V 20A/40A/60A DC to DC on-board Battery Charger. Tmeperature measurement can be realized close to any part of the battery. With renogy's remote temperature sensor, your DC-DC charger can use incoming temperature readings from the battery to more accurately adjust for temperature compensation and voltage adjustments.

DCC Battery Tmenperature Sensor for DC to DC On-Board Battery Charger #ad - Proper charging voltage is important to the lifespan and performance of your battery. Enhance your battery charging system with a Renogy Temperature Sensor today! Remote temperature sensor to active temperature compensation function of solar charge controller. Easily installed with rj11 connector, cable length: 118 inchestemperature range: -20 ~ +80

Worry-free service renogy provides complete after-sales service, including 1-year material warranty and easy-to-reach customer support.

More information about RTSDCC-G1 #ad

SELTERM 10 Pack 4 Gauge 4 AWG 5/16" Stud UL Heavy Duty Copper Crimp Lugs Welding Cable Bare Copper Eyelet Lug

#ad
SELTERM #ad - Furthermore, the copper battery lugs are both UL and CUL listed to ensure optimal performance once installed. The copper eyelet connectors are rated for up to 600 volts and tested to ANSI/UL 486 standard. Close end pad seals Out Moisture Keeping Cables Dry. The copper lugs also meet S. A. E conductivity standards and are RoHS compliant.

SELTERM 10 Pack 4 Gauge 4 AWG 5/16" Stud UL Heavy Duty Copper Crimp Lugs Welding Cable Bare Copper Eyelet Lug #ad - Can be Crimped or Soldered. Heavy duty construction for Enhanced High Temperature Durability. Heavy duty battery cable lugs from SELTERM are manufactured using industry leading manufacturing processes to guarantee a high-quality product. Lugs are suitable for use with Welding Cables and Battery Cables. Ul tested & Approved.

. Made from 100% annealed Electrolytic Grade Copper for Max Conductivity. Copper tubing used for producing the battery cable lugs meet ASTM B 188 electrical grade standard.

More information about SELTERM #ad


Similar products



Blue Sea Systems 250A MRBF Terminal Fuse

#ad
Blue Sea Systems 5189 #ad - Requires the use of terminal fuse blocks PN 5191 or PN 2151-do not mount the fuse directly to the battery terminal. Pack of 1, 250a terminal fuse, Max voltage: 58V DC. Heavy duty construction for Enhanced High Temperature Durability. 10, 000 aic at 14v dc satisfies abyc requirements for dc main circuit protection on large battery banks Requires the use of Terminal Fuse Blocks PN 5191 or PN 2151-do not mount the fuse directly to the battery terminal 1, 000A Interrupt Capacity.

Blue Sea Systems 250A MRBF Terminal Fuse #ad - Ip66 - protected against powerful water jets. 10, 000 aic at 14v dc satisfies abyc requirements for DC Main circuit protection on large battery banks. Made from 100% annealed Electrolytic Grade Copper for Max Conductivity. Ul tested & Approved. Ignition protected-safe for installation aboard gasoline powered boats.

Can be Crimped or Soldered. Visible indication of blown condition. Close end pad seals Out Moisture Keeping Cables Dry.

More information about Blue Sea Systems 5189 #ad


Similar products



Renogy 500A Battery Monitor, High and Low Voltage Programmable Alarm, Voltage Range 10V-120V and up to 500A, Compatible with 12V Lithium Sealed, Gel, Flooded Batteries

#ad
Renogy RBM500-G1 #ad - Made from 100% annealed Electrolytic Grade Copper for Max Conductivity. Note: battery cables are not included. Visible indication of blown condition. Ignition protected-safe for installation aboard gasoline powered boats. Heavy duty construction for Enhanced High Temperature Durability. Close end pad seals Out Moisture Keeping Cables Dry.

Large backlit lcd displays multiple electronic parameters voltage, current, consumed power and battery capacity. Can be Crimped or Soldered. Pack of 1, 250a terminal fuse, Max voltage: 58V DC. High and low voltage programmable alarm - backlight and voltage value will flash Simultaneously. 10, 000 aic at 14v dc satisfies abyc requirements for DC Main circuit protection on large battery banks.

Renogy 500A Battery Monitor, High and Low Voltage Programmable Alarm, Voltage Range 10V-120V and up to 500A, Compatible with 12V Lithium Sealed, Gel, Flooded Batteries #ad - Requires the use of terminal fuse blocks PN 5191 or PN 2151-do not mount the fuse directly to the battery terminal. Data storage - designed to automatically store the last testing data when system shuts off. The renogy battery monitor will help you keep track of how charged or discharged your batteries are.

This is a big help when you're trying to conserve energy. Voltage, current, consumed power & battery capacity are all accurately measured & displayed on the LCD screen in real-time. High precision Current detection; accurate Battery SOC%.

More information about Renogy RBM500-G1 #ad


Similar products



Blue Sea Systems 5191 Fuse Block Terminal 30-300 AMP

#ad
Acr Electronics 5191 #ad - Visible indication of blown condition. Ip66 - protected against powerful water jets. Ignition protected when used with MRBF fuses. Fuses sold separately. Voltage max operating: 58v dc, terminal fuses avail. 30a-300a, terminal stud size: 5/16"-18 8mm, amps max operating: 300A per block, Mounting Hole Size: #10 5mm3/8".

Compact, windlass, inverter, high-amp fuse-appropriate for DC Main, and bow thruster circuit protection. Weatherproof - suitable for small open-cockpit boats and other harsh environments. Ignition protected when used with Blue Sea Systems' MRBF Terminal Fuse. Universal battery monitor- voltage range 10v-120v and up to 500A.

Blue Sea Systems 5191 Fuse Block Terminal 30-300 AMP #ad - Made from 100% annealed Electrolytic Grade Copper for Max Conductivity. Can be Crimped or Soldered. Insulating cap prevents accidental shorts. Requires the use of terminal fuse blocks PN 5191 or PN 2151-do not mount the fuse directly to the battery terminal. Ul tested & Approved. Note: battery cables are not included.

Provides high current protection in tight space constraints. Data storage - designed to automatically store the last testing data when system shuts off.

More information about Acr Electronics 5191 #ad


Similar products



Maxdot 4 Pack UL Wire Lugs 8 Gauge 8 AWG 1/4 Inch Stud Ring terminals Heavy Duty Copper Crimp Lugs Welding Cable Bare Copper Eyelet Lug with Heat Shrink Black, Red 8 AWG 1/4 Ring

#ad
Maxdot #ad - Made from 100% annealed Electrolytic Grade Copper for Max Conductivity. Heavy duty construction for Enhanced High Temperature Durability. 10, 000 aic at 14v dc satisfies abyc requirements for DC Main circuit protection on large battery banks. The mention of any related model designation above is only for purposes of demonstrating compatibility, not work as brands.

Ignition protected-safe for installation aboard gasoline powered boats. Voltage max operating: 58v dc, terminal fuses avail. 30a-300a, terminal stud size: 5/16"-18 8mm, amps max operating: 300A per block, Mounting Hole Size: #10 5mm3/8". Compact, inverter, high-amp fuse-appropriate for DC Main, windlass, and bow thruster circuit protection.

Maxdot 4 Pack UL Wire Lugs 8 Gauge 8 AWG 1/4 Inch Stud Ring terminals Heavy Duty Copper Crimp Lugs Welding Cable Bare Copper Eyelet Lug with Heat Shrink Black, Red 8 AWG 1/4 Ring #ad - Weatherproof - suitable for small open-cockpit boats and other harsh environments. Note: battery cables are not included. Requires the use of terminal fuse blocks PN 5191 or PN 2151-do not mount the fuse directly to the battery terminal. Large backlit lcd displays multiple electronic parameters voltage, current, consumed power and battery capacity.

Can be Crimped or Soldered. Ul and rohs certified: ul486a, heavy duty and enhanced high temperature durability, made of pure copper, annealed electrolytic grade copper for max conductivity. Environmental heat shrink: 3:1 adhesive-lined heat shrinkable tubing black and red, environmental protection material, can be applied in industry, operating temperature range: 257°F 125°C.

More information about Maxdot #ad


Similar products



Blue Sea Systems MaxiBus 250A BusBar with Four 5/16

#ad
Blue Sea Systems 2127-BSS #ad - Can be Crimped or Soldered. Ip66 - protected against powerful water jets. Insulating cap prevents accidental shorts. Wide appliance: the copper battery lug great suitable for marine, and misc, solar panels electrical applications, auto, golf carts, please contact us promptly if you have any questions.250a maxibus busBar with 4 studs.

Bus material - tin platted copper cda 110/uns c1100 insert molded stainless steel studs eliminate need for securing nut and allow high torqueing for excellent electrical contact Raised bus provides easy access to multiple wires on a single stud. Ul 94-v0 rated base material resists high heat, tin plated pure electrical copper for maximum conductivity.

Blue Sea Systems MaxiBus 250A BusBar with Four 5/16 #ad - Made from 100% annealed Electrolytic Grade Copper for Max Conductivity. Ignition protected when used with MRBF fuses. High precision Current detection; accurate Battery SOC%. Requires the use of terminal fuse blocks PN 5191 or PN 2151-do not mount the fuse directly to the battery terminal. Continuous rating: 250A AC/DC.

Pack of 1, 250a terminal fuse, Max voltage: 58V DC. Large backlit lcd displays multiple electronic parameters voltage, current, consumed power and battery capacity. High and low voltage programmable alarm - backlight and voltage value will flash Simultaneously.

More information about Blue Sea Systems 2127-BSS #ad


Similar products



Blue Sea Systems ST Blade Fuse Block - 12 Circuits with Negative Bus & Cover

#ad
Blue Sea Systems 5026 #ad - Ul tested & Approved. 2 mounting holes accept #10 M5 screws. Can be Crimped or Soldered. Ul and rohs certified: ul486a, heavy duty and enhanced high temperature durability, made of pure copper, annealed electrolytic grade copper for max conductivity. Environmental heat shrink: 3:1 adhesive-lined heat shrinkable tubing black and red, environmental protection material, can be applied in industry, operating temperature range: 257°F 125°C.

Exquisite workmanship: wire lugs with heat shrink can be soldered or crimped and fit solid or stranded gauge wire, heat shrink provides tight and full seal, prevents leakage of any solder. Close end pad seals Out Moisture Keeping Cables Dry. Voltage max operating: 58v dc, terminal fuses avail. 30a-300a, terminal stud size: 5/16"-18 8mm, amps max operating: 300A per block, Mounting Hole Size: #10 5mm3/8".

Blue Sea Systems ST Blade Fuse Block - 12 Circuits with Negative Bus & Cover #ad - Compact, windlass, inverter, high-amp fuse-appropriate for DC Main, and bow thruster circuit protection. Weatherproof - suitable for small open-cockpit boats and other harsh environments. Positive distribution bus with #10-32 stud. Requires the use of terminal fuse blocks PN 5191 or PN 2151-do not mount the fuse directly to the battery terminal.

10, 000 aic at 14v dc satisfies abyc requirements for DC Main circuit protection on large battery banks. Continuous rating: 250A AC/DC.

More information about Blue Sea Systems 5026 #ad


Similar products



IWISS Battery Cable Lug Crimping Tool from AWG 8-1/0 with Cable Cutter

#ad
Iwiss Electric Co.,ltd HX-50B #ad - Data storage - designed to automatically store the last testing data when system shuts off. Ergonomics design】 anti-slip rubber coated handle for a more comfortable and saving labor work. Rotate crimp dies】 the tool has 6 dies of 8, 1/0 awg, 1, 2, 6, 4, using rotating heads with a spring loaded locking pin to keep the heads.

Durable】 crimper is made of scm-40 hardened steel for a durable and long service life use. 4. 2 cm weight of crimper: approx. Wide appliance: the copper battery lug great suitable for marine, golf carts, solar panels electrical applications, and misc, auto, please contact us promptly if you have any questions.

IWISS Battery Cable Lug Crimping Tool from AWG 8-1/0 with Cable Cutter #ad - 250a maxibus busBar with 4 studs. Every authentic iwiss product comes with a lased IWISS logo, designed package and/or a QR code sticker on the box. Description of crimper: the crimber is robust and in high quality Crimper is lightweight and easy to carry Technical Information for crimper: Length of crimper: approx.

Battery cable ends kits size: 4 pack of 8 awg heavy-duty lugs with a 1/4 Screw Size Ring, includes: 4 Pure Copper Lugs, 4 Heat Shrink Tubes2 Black and 2 Red. Voltage max operating: 58v dc, terminal fuses avail. 30a-300a, amps max operating: 300a per block, terminal stud size: 5/16"-18 8mm, Mounting Hole Size: #10 5mm3/8".

Compact, windlass, inverter, high-amp fuse-appropriate for DC Main, and bow thruster circuit protection.

More information about Iwiss Electric Co.,ltd HX-50B #ad


Similar products



Blue Sea Systems e-Series On/Off Battery Switch

#ad
Acr Electronics 915 #ad - 10, 000 aic at 14v dc satisfies abyc requirements for DC Main circuit protection on large battery banks. Accepts ato and ATC fast acting blade fuses. High precision Current detection; accurate Battery SOC%. Note: battery cables are not included. Ul tested & Approved. Can be Crimped or Soldered. Large backlit lcd displays multiple electronic parameters voltage, current, consumed power and battery capacity.

Blue Sea Systems e-Series On/Off Battery Switch #ad - 3. 85"h x 3. 85"w x 3. 1"d. We specially thicken and reinforce the metal plate on crimp head. Easy operation】 press the screw and rotate the dies to the size you need, then just take a strong pull of the ratcheting wire terminal crimper then produce a good crimp on cable lugs. High precision jaw design】 crimper with high precision jaw ensure a tightly connection after crimping with strong work pressure.

. Ignition protected-safe for installation aboard gasoline powered boats. Ignition protected when used with MRBF fuses. Terminal stud size: 3/8" - 16. Positive distribution bus with #10-32 stud.

More information about Acr Electronics 915 #ad


Similar products



SELTERM 2 Pack 6 Gauge 6 AWG 3/8" Stud UL Marine Grade Ring Terminal Lugs Battery Cable Tinned Copper Eyelets

#ad
SELTERM #ad - High precision Current detection; accurate Battery SOC%. Data storage - designed to automatically store the last testing data when system shuts off. Can be Crimped or Soldered. The battery Cable lugs meet S. A. E conductivity standards and are tested to UL 486 with voltage rating of up to 600 V. Ul tested & Approved.

Ignition protected-safe for installation aboard gasoline powered boats. Switches a single battery to a single load group. Corrosion free Ideal for Marine Automotive or Outdoor Use. Ignition protected when used with MRBF fuses. We specially thicken and reinforce the metal plate on crimp head. Easy operation】 press the screw and rotate the dies to the size you need, then just take a strong pull of the ratcheting wire terminal crimper then produce a good crimp on cable lugs.

SELTERM 2 Pack 6 Gauge 6 AWG 3/8" Stud UL Marine Grade Ring Terminal Lugs Battery Cable Tinned Copper Eyelets #ad - High precision jaw design】 crimper with high precision jaw ensure a tightly connection after crimping with strong work pressure. Can be Crimped or Soldered. Note: battery cables are not included. Terminal stud size: 3/8" - 16. Made from 100% annealed Tinned Copper for Max Current Flow.

More information about SELTERM #ad


Similar products