DROK Mini USB DC-DC Step Up Converter 3V to 5V 2A Mobile Power Supply Board with Battery Indicator for Tablet PC iPad iPhone

#ad
DROK 90485 #ad - Charging power supply DIY. Feature: module properties: non-isolated step-up module BOOST Input voltage: 2. 6-5. 5v input current: 0-3a output voltage: 5v output current: 0-2A Operating temperature: -40°c to +85°c Working frequency: 1. 2mhz conversion efficiency: up to 93% short circuit protection: Yes Over-temperature protection: Yes Over-temperature automatic shutdown output Input reverse polarity protection: No please install diode at input port Power indicator: 3.

6v red led light identify resistance: support tablet pc, phone, MP3 Installation: two 3mm screws Connection: V-IN input, USB output Dimensions: 20x20x6.8mm package include: 1x DC-DC Converter Dc 2. 6-5. 5v to 5v 2a non-isolated step up boost module. Max 2a output, up to 93% conversion efficiency. With red green battery indicator, the red led lights up when it lower than 3.

DROK Mini USB DC-DC Step Up Converter 3V to 5V 2A Mobile Power Supply Board with Battery Indicator for Tablet PC iPad iPhone #ad - 6v. With over-current protection, over-temp protection to protect the circuit. Usb output interface, ipad, psp, used for mobile phones, mp3, etc.

More information about DROK 90485 #ad

ALLPOWERS 2 Pieces 2.5W 5V/500mAh Solar Panel DIY Battery Charger Kit Mini Encapsulated Solar Cell Epoxy for Battery Power LED 130x150mm Solar Panel Only

#ad
ALLPOWERS 130x150-2 #ad - Use this solar panel to power a convenient appliance with free green energy from the sun. Get the allpowERS charger now. Package contents: 5v 500mah 2. 5w solar panels2 solar panels, totally 5W. Solar panel kit with battery, power small motors or other loads; perfect devices for science project. Halloween day, development, buy asap"your satisfaction is our highest priority", contact us firstly if you have any question ALLPOWERS: Always Power Your Life Whenever and Wherever ALLPOWERS is a company in combination with solar and battery application design, special offer for one day only, production and sales.

Protective film: pe attention: the bubble on the panel will not affect its normal working, just like the plastic film on the phone Warranty: 18-month product guarantee from ALLPOWERS High-efficiency encapsulated solar panel, you can remove it, providing enough power for DIY. Technical data for one piece * size:130mm*150mm * Voltage: 5V * Current: 500mAh * Power: 2.

ALLPOWERS 2 Pieces 2.5W 5V/500mAh Solar Panel DIY Battery Charger Kit Mini Encapsulated Solar Cell Epoxy for Battery Power LED 130x150mm Solar Panel Only #ad - 5w * conversion rate: 17% * weight: 92g * Packgae:2 pieces solar panel totally 5W Standard Configuration 1. Backing: PCB 2. Portable, compact & stylish size with solid attractive casing. Uv treated surface and durable weatherproof PCB board. The allpowers portable charger allows you to charge your electronic products anywhere at any time.

More information about ALLPOWERS 130x150-2 #ad


Similar products



DROK Ultra Small Mini DC Power Module DC 3V to 5V 1A USB Battery Converter Step Up Module Charge for MP3/MP4/Phone Samsung Galaxy S3 iPad iPhone 4S 5 6/6 Plus

#ad
DROK 90399 #ad - In order to power your electronic devices when your device needs 5V power supply, this module can be directly step-up to 5V, when you only have lithium battery, solve your problems. Package includes: 1x dc-dc converter High-efficiency encapsulated solar panel, providing enough power for DIY. Portable, compact & stylish size with solid attractive casing.

Feature: module properties: non-isolated step-up module Input voltage: DC 1-5V It is better that the input voltage greater than 3V. Undervoltage indicator: when battery voltage below 2. 7v in load, the led will not light up; when battery voltage less than 2. 7v in load, led will light off; when battery voltage is more than 2.

DROK Ultra Small Mini DC Power Module DC 3V to 5V 1A USB Battery Converter Step Up Module Charge for MP3/MP4/Phone Samsung Galaxy S3 iPad iPhone 4S 5 6/6 Plus #ad - 7v without load, LED will in dim light. Simple wiring connection: connect the IN+ to positive pole of power supply and connect IN- to negative pole of power supply. Uv treated surface and durable weatherproof PCB board. Solar panel kit with battery, power small motors or other loads; perfect devices for science project.

Efficiency: up to 96% the higher the input voltage, the higher the efficiency. Package contents: 5v 500mah 2.

More information about DROK 90399 #ad


Similar products



Icstation TP4056 Micro USB 5V 1A 18650 Lithium Battery Charger Board, with Overcharge Over-Discharge Over-Current Protection Pack of 10

#ad
Icstation Micro USB 5V 1A Li-ion Battery Charger #ad - Specifications:chip: tp4056input Voltage: DC5V Charging Cut-off Voltage: 4. 2v±1% maximum charging current: 1A Battery Over Discharge Protection Voltage: DC2. 5v battery over current protection Current: 3A Board Size: 26 X 17mm/1. 02 x 067inchl*w package included: 10 pcs tp4056 micro usb 5V 1A 18650 Lithium Battery Charger BoardNotice Please:1.

When use this module at first time, there may be no voltage output between OUT+ and OUT-, it need connect the 5V power supply to active the circuit; When the battery disconnect with this module and connect it again also need this step. Please choose the original seller "icstation", only Icstation provide the best after-sales service and we are not responsible for products sold by counterfeit seller.

Icstation TP4056 Micro USB 5V 1A 18650 Lithium Battery Charger Board, with Overcharge Over-Discharge Over-Current Protection Pack of 10 #ad - Fba service will be delivery in 2 - 4 days. Efficiency: up to 96% the higher the input voltage, the higher the efficiency. Battery over discharge protection voltage: dc2. 5v, battery over current protection Current: 3A, Board Size: 26 X 17mm/1. 02 x 067inch L*W. 2. When use the phone power adapter as the input power supply, it need the power adater output current is over 1A.

More information about Icstation Micro USB 5V 1A Li-ion Battery Charger #ad


Similar products



XCSOURCE 5 pcs 1A 5V Micro USB TP4056 Lithium Battery Power Charger Board Module TE420

#ad
XCSOURCE TE420 #ad - Connected to the battery the best good contact. Please choose the original seller "icstation", only Icstation provide the best after-sales service and we are not responsible for products sold by counterfeit seller. Fba service will be delivery in 2 - 4 days. Otherwise rushed over battery voltage out on much.

It can be used for voltage 3. 6 3. 7v, etc. Chip at work about 60 degrees fever is normal. This module is used for single-cell lithium or lithium multi-section parallel, charging ports can take power from USB. It can be used for voltage 3. 6 3. 7v, etc. Full charging voltage: 4. 2v. Mini usb input terminal with a female, and still retains the input voltage wiring pads, can be directly input to do with the phone charger rechargeable lithium battery, can be very convenient DIY.

XCSOURCE 5 pcs 1A 5V Micro USB TP4056 Lithium Battery Power Charger Board Module TE420 #ad - 18650, polymer and other lithium battery charge and discharge protection. Specifications: Input Voltage: 4. 5~5. 5v full charging voltage: 4.

More information about XCSOURCE TE420 #ad


Similar products



yueton Pack of 10 Wire Lead Battery Storage Box Case Holder for 18650 Button Top Single Battery

#ad
yueton #ad - Uv treated surface and durable weatherproof PCB board. Electronic circuit requires no electrolytic capacitors and tantalum and it adopt ceramic capacitor. Input voltage: 4. 5~5. 5v. Please choose the original seller "icstation", only Icstation provide the best after-sales service and we are not responsible for products sold by counterfeit seller.

Fba service will be delivery in 2 - 4 days. Package includes 10 battery case holders. With spring clip design, you can easily to put the battery in it High-efficiency encapsulated solar panel, providing enough power for DIY. Portable, compact & stylish size with solid attractive casing. 18650, polymer and other lithium battery charge and discharge protection.

yueton Pack of 10 Wire Lead Battery Storage Box Case Holder for 18650 Button Top Single Battery #ad - Mini usb input terminal with a female, and still retains the input voltage wiring pads, can be directly input to do with the phone charger rechargeable lithium battery, can be very convenient DIY. Wire lead battery case holder for 18650 single battery. Efficiency: up to 96% the higher the input voltage, the higher the efficiency.

Package contents: 5v 500mah 2. 5w solar panels2 solar panels, totally 5W. Wire lead battery case for 18650 Color: black Material: plastic and metal Size: 7.

More information about yueton #ad


Similar products



CHENBO 10 Pcs 5V Micro USB 1A 18650 TP4056 Lithium Battery Charging Board With Protection Charger Module

#ad
CHENBO 4333092022 #ad - Color: black;inner size: 2-3/4L x 5/8w inch. Package contents: 5v 500mah 2. 5w solar panels2 solar panels, totally 5W. Maximum charge current: 1000mA. Undervoltage indicator: when battery voltage below 2. 7v in load, the led will not light up; when battery voltage less than 2. 7v in load, led will light off; when battery voltage is more than 2.

7v without load, LED will in dim light. Simple wiring connection: connect the IN+ to positive pole of power supply and connect IN- to negative pole of power supply. Input voltage: 5V Charging cut-off voltage: 4. 2v ± 1% maximum charge current: 1000mA Battery over-discharge protection voltage: 2. 5v battery overcurrent protection current: 3A Board size: 2.

6 * 1. 7cm note: the first time you access the battery, and the battery from the b + b-, then access 5V voltage charge your energy can activate the protection circuit, it may no voltage between the output OUT + and OUT-, then draw a line on the short open also need recharged to activate the protection circuit.

CHENBO 10 Pcs 5V Micro USB 1A 18650 TP4056 Lithium Battery Charging Board With Protection Charger Module #ad - Micro usb lithium ion / lipo / 18650 battery charging board, built-in TP4056 chip, set charging and battery over-charge over-discharge over-current protection all in one practial for your DIY 18650 battery power supply to prolong its lifetime. On-board micro usb and soldering joints 5V input port and charging status indicator red indicator is charging, green or blue indicator is full charged.

Charging cut-off voltage: 4.

More information about CHENBO 4333092022 #ad


Similar products



Icstation MT3608 Mico USB DC 2V-24V to 5V-28V 2A Boost Converter, Voltage Regulator, Booster, Step Up Power Supply Module 3.3V 5V 6V 9V 12V to 5V 6V 9V 12V 24V Pack of 4

#ad
Icstation MT3608 DC-DC Step Up Voltage Regulator #ad - Efficiency: up to 96% the higher the input voltage, the higher the efficiency. Full charging voltage: 4. 2v. Material: plastic and metal. Package includes 10 battery case holders. Peak current: 2A 1A is recommended for a long time. Dc 2-24v input and 5v-28v adjustable voltage output with high power conversion efficiency up to 93%.

Please send us an email in case you met problem in using or received defective one, we will take charge of your order and follow up your emails in 12 hours. This is a boost converter module, so the output voltage should be at least 2V higher than the input voltage. 2. Electronic circuit requires no electrolytic capacitors and tantalum and it adopt ceramic capacitor.

Icstation MT3608 Mico USB DC 2V-24V to 5V-28V 2A Boost Converter, Voltage Regulator, Booster, Step Up Power Supply Module 3.3V 5V 6V 9V 12V to 5V 6V 9V 12V 24V Pack of 4 #ad - Color: black;inner size: 2-3/4L x 5/8w inch. Portable, compact & stylish size with solid attractive casing. Thank you! high-efficiency encapsulated solar panel, providing enough power for DIY. Micro usb lithium ion / lipo / 18650 battery charging board, built-in TP4056 chip, set charging and battery over-charge over-discharge over-current protection all in one practial for your DIY 18650 battery power supply to prolong its lifetime.

On-board micro usb and soldering joints 5V input port and charging status indicator red indicator is charging, green or blue indicator is full charged. Maximum charge current: 1000mA.

More information about Icstation MT3608 DC-DC Step Up Voltage Regulator #ad


Similar products



Sunnytech 0.5w 5v 100ma Mini Small Solar Panel Module DIY Polysilicon Solar Epoxy Cell Charger B016

#ad
Sunnytech #ad - Color: black;inner size: 2-3/4L x 5/8w inch. Input voltage: 4. 5~5. 5v. Connect the battery to the b + b-, inserted into the USB female mobile phone charger, the red light is being charged, the green light to full. Inputs with micro usb female, can be directly input to do with the phone charger rechargeable lithium battery.

This module is used for single-cell lithium or lithium multi-section parallel, charging ports can take power from USB. It can be used for voltage 3. 6 3. 7v, etc. For those of you who want to connect more than one panel together, this panel has two soldered tabs for permanent connections Parameters Model Number: GP80*80-10A100 Material: Monocrystalline Silicon Number of Cells: 10 Max.

Sunnytech 0.5w 5v 100ma Mini Small Solar Panel Module DIY Polysilicon Solar Epoxy Cell Charger B016 #ad - 2. Red/black 3 feet long wire, connected as one wire. Efficiency: up to 96% the higher the input voltage, the higher the efficiency. Micro usb lithium ion / lipo / 18650 battery charging board, built-in TP4056 chip, set charging and battery over-charge over-discharge over-current protection all in one practial for your DIY 18650 battery power supply to prolong its lifetime.

On-board micro usb and soldering joints 5V input port and charging status indicator red indicator is charging, green or blue indicator is full charged. Color coded wires with alligator clips make working with it easy and fun. Color coded wires with alligator clips make working with it easy and fun.

More information about Sunnytech #ad


Similar products



5PCS PFM Control DC-DC Converter Step Up Boost Module 600MA USB Charger 0.9V-5V to 5V Power Supply Modul TE110

#ad
SenMod 6598350492 #ad - It can be used for teaching purpose. Input voltage: 5V. Features: 1. Material: plastic and metal. Micro usb lithium ion / lipo / 18650 battery charging board, built-in TP4056 chip, set charging and battery over-charge over-discharge over-current protection all in one practial for your DIY 18650 battery power supply to prolong its lifetime.

On-board micro usb and soldering joints 5V input port and charging status indicator red indicator is charging, green or blue indicator is full charged. Such as, two 5. 5v solar panel connect together in series, so its voltage is 11V. Electronic circuit requires no electrolytic capacitors and tantalum and it adopt ceramic capacitor.

5PCS PFM Control DC-DC Converter Step Up Boost Module 600MA USB Charger 0.9V-5V to 5V Power Supply Modul TE110 #ad - 3. Undervoltage indicator: when battery voltage below 2. 7v in load, the led will not light up; when battery voltage less than 2. 7v in load, led will light off; when battery voltage is more than 2. 7v without load, LED will in dim light. Simple wiring connection: connect the IN+ to positive pole of power supply and connect IN- to negative pole of power supply.

Pcb size: 34mm x 15. 2mm ultra-small size, installed in a variety of small equipment Package Includes: 5 PCS 0

More information about SenMod 6598350492 #ad


Similar products