HiLetgo 250W DC-DC Module 10-40V to 10-50V 6A Adjustable Step-Up Power Supply Module 250W DC Booster Constant Voltage Constant Current Power Converter Module

#ad
HiLetgo #ad - 4, diy a mobile notebook power supply: 12V coupled with high-capacity lithium battery pack, so you can go where light where books. Module properties: non-isolated step-up module BOOST. 6, to the battery, rechargeable lithium batteries. 3, as the car power supply for your laptop, PDA or a variety of digital products supply.

Package include: 1* 250w dc-dc boost converter Constant Current Power Supply Module Boost step-up Constant Current Mobile Power Supply. Description: module properties: non-isolated step-up module boost input voltage: dc10v-40v input current: 6A MAX exceeds4A please enhance heat dissipation Quiescent current: 10mA 12V liter 20V, the output voltage, the higher the current will increase too quiet Output voltage: 10-50V continuously adjustable Constant range: 0

HiLetgo 250W DC-DC Module 10-40V to 10-50V 6A Adjustable Step-Up Power Supply Module 250W DC Booster Constant Voltage Constant Current Power Converter Module #ad - 2-6a temperature: -40 to + 85 degrees ambient temperature is too high, diy a power supply, installation: 4 3mm screw holes connection method: Connection Output Module size: Length 70mm width 36mm height 13mm Single module: 50g Applications: 1, please enhance heat dissipation Operating frequency: 150KHz Conversion efficiency: up to 96% Overcurrent protection: There Input reverse polarity protection: Yes, 12V can input and output can 12-50V adjustable.

Input voltage: DC10V-40V. 7, driving high-power LED lights. 5, solar panel regulator. Operating frequency: 150KHz.

More information about HiLetgo #ad

Gowoops 5PCS 150W DC-DC 10-32V to 12-35V Step Up Boost Converter Module Adjustable Power Voltage

#ad
Gowoops LYSB01GRIQBRY-ELECTRNCS #ad - Laptops which is less than 150W, power supply and so on. Conversion efficiency: 94% for reference: when Input 19V 2. 5a output 16V. Input voltage: dc 10v-32v, output voltage: DC12V-35Vadjustable. Use a 12v battery drive 19V 3. 42a notebook, the module temperature about 45 ℃Conversion efficiency: 94% For reference: when Input 19V 2.

5a output 16v output ripple: 2% max 20m-bandwidth operating temperature: industrial -40℃ to +85℃ ambient temperature exceeds 40°c, lower power use, or to enhance heat dissipation Full load temperature rise: 45℃ No-load current: 25mA typical Voltage regulation: ± 05% dynamic response speed: 5% 200us Short circuit protection: None Please Install fuses and protection circuits at Input port.

Input reverse polarity protection: none please comply with a reverse protection or connect a diode at input partsspecifiction: input voltage: dc 10v-32voutput voltage: dc12v-35vadjustableinput Current: 16A MAX Please enhance heat dissipation if more than 10A Output Current: 10A MAX Output power: natural cooling 100W MAX,  strengthening cooling 150W MAX real powerModule Properties: non-isolated step-up module BOOST Size: 65mm x 35mm x 21mmPackage Includes: 5 x 150W Boost Converter Convenient for diy -- you can use this module to DIY an output-adjustable car power supply.

Gowoops 5PCS 150W DC-DC 10-32V to 12-35V Step Up Boost Converter Module Adjustable Power Voltage #ad - Please choose the original seller: Gowoops, we don't guarantee the quality of the products bought from other seller. Featrure:★ easy to drive 65W 90W dual-core notebook. Easily charging for 60w, industrial grade -40 degree to + 80 degree work temperature, suitable for ac adapter, 90W etc. Input current: 16a max, Output current: 10A MAX.

More information about Gowoops LYSB01GRIQBRY-ELECTRNCS #ad


Similar products



TeOhk DC-DC 250W Booster Constant Voltage Constant Current Power Converter Module Adjustable Step-Up Power Supply Module LED Driver

#ad
TeOhk #ad - For example, if the output is 10A, you can use two modules in parallel. Product parameters module name 250w boost constant current module Modularity: Non-isolated boost module BOOST Input Voltage: DC8. 5v-48v input current: 10a max exceeds 8a, the higher the output voltage, the static current will increase output voltage: 10-50v continuously adjustable 12-80V fixed output for volume customers Output current: 10A MAX More than 6A, the larger the differential pressure, please strengthen the heat Static working current: 10mA 12V liters 20V, please strengthen the heat dissipation related to the input and output voltage difference, the smaller the output current Constant current range: 0.

2-8a output power: = input voltage * 10a, such as: input 12v * 5a = 60w, input 36v*5a=180w, input 24V * 5A = 120W, input 48V*5A=240W If you need more power, you can use two modules in parallel. Conversion efficiency: 94% for reference: when Input 19V 2. 5a output 16V. Input current: 16a max, Output current: 10A MAX.

Working temperature: -40~+85 degrees enhance heat dissipation when the ambient temperature is too high Operating frequency: 150KHz conversion efficiency: up to 96% efficiency related to input, automatically reduce the output voltage, voltage difference Overcurrent protection: Yes input over 13A, output voltage, current, there is a range of errors.

TeOhk DC-DC 250W Booster Constant Voltage Constant Current Power Converter Module Adjustable Step-Up Power Supply Module LED Driver #ad - Input reverse connection protection: yes, if you need more reverse current, less than 5a, please input the diode in the input Installation method: 4 3mm screw holes Wiring method: wiring output module size: length 70mm width 42mm height 13mm module single weight: 50 grams Convenient for diy -- you can use this module to DIY an output-adjustable car power supply.

Laptops which is less than 150W, power supply and so on.

More information about TeOhk #ad


Similar products



DROK DC Buck Module, Adjustable Buck Converter Step Down Voltage Regulator 6V-32V 30V 24V 12V to 1.5-32V 5V 5A LCD Power Supply Volt Reducer Transformer Module Board with USB Port Protective Case

#ad
DROK #ad - 2. Input voltage: dc 10v-32v, output voltage: DC12V-35Vadjustable. Parameters: chip: mp2304 input voltage: 6~32V Output voltage: 1. 5~32v continuously adjustable Input should be 1. 5v higher than output. Output current: 5A max, adjustable, recommended use within 4. 5a. F-1 mode: display input voltage 3. Current regulation can only be performed in the status of constant current.

Over 3a or 35w, please enhance heat dissipation. Constant current requires an output voltage of above 2V to be adjusted. Dimension: 65. 6*40*25mm display Modes: 1. Installation: 8x pillars, 8x 3mm screws Wire Connection: terminal block or soldering terminals; VIN is input; VOUT is output. The case is packaged unassembled to avoid damage during transit.

DROK DC Buck Module, Adjustable Buck Converter Step Down Voltage Regulator 6V-32V 30V 24V 12V to 1.5-32V 5V 5A LCD Power Supply Volt Reducer Transformer Module Board with USB Port Protective Case #ad - F-0 mode: display output voltage 2. Please add a diode when used for charging. Operating temperature: -20℃ to +70℃ operating frequency: 180khz conversion efficiency: up to 96% Short circuit protection: Yes Constant current value set by constant current function Over-temperature protection: Yes Automatically shut off the output when overtemp.

Input reverse polarity protection: Yes Output backflow prevention: None. Laptops which is less than 150W, power supply and so on.

More information about DROK #ad


Similar products



Finware 10 Pair XT60 XT-60 Male Female Bullet Connectors Power Plugs with Heat Shrink for RC Lipo Battery

#ad
Finware #ad - Conversion efficiency: 94% for reference: when Input 19V 2. 5a output 16V. Easily charging for 60w, suitable for ac adapter, industrial grade -40 degree to + 80 degree work temperature, 90W etc. These original nylon xt60 plugs can handle 60A current for extended periods without exceeding 80DegC thanks to their better contact surface area.

The xt60 ensures a solid high-amp connection, perfect for applications up to and beyond 65A constant. The plug is also less likely to deform or melt. 12" black and 12" red 5mm high Quality Heat Shrink Tubing 2:1 included. Heat shrink 2:1 both red and Black Included - 2 Feet Total. High temperature Nylon Material.

Finware 10 Pair XT60 XT-60 Male Female Bullet Connectors Power Plugs with Heat Shrink for RC Lipo Battery #ad - 2. The case is packaged unassembled to avoid damage during transit. It needs to be manually installed. 10 pair high quality Female and Male XT60 Connectors. 60 amp current Handling Bullet Connectors. Xt-60 connector for rc Lipo Batteries Drones Airplanes Cars Vehicles. Input current: 16a max, Output current: 10A MAX.

Output voltage is set as around 20v by default, if your input is lower than that, please turn potentiometer anticlockwise for 10 laps or more until voltage changes.

More information about Finware #ad


Similar products



NTE Electronics SW02-10 No-Clean Solder Wick, 4 Blue.098" Width, 10' Length

#ad
NTE Electronics, Inc. SW02-10 #ad - Output voltage is set as around 20v by default, if your input is lower than that, please turn potentiometer anticlockwise for 10 laps or more until voltage changes. Convenient for diy -- you can use this module to DIY an output-adjustable car power supply. The case is packaged unassembled to avoid damage during transit.

60 amp current Handling Bullet Connectors. Xt-60 connector for rc Lipo Batteries Drones Airplanes Cars Vehicles. Residue left behind is halide free and non-conductive, so it does not have to be cleaned off the board. Easily charging for 60w, industrial grade -40 degree to + 80 degree work temperature, suitable for ac adapter, 90W etc.

NTE Electronics SW02-10 No-Clean Solder Wick, 4 Blue.098" Width, 10' Length #ad - Removes up to four times more solder than conventional wick, and extracts solder much faster than wicks based on Type-R fluxes. 100% copper wick has fine braid design to promote strong capillary action to pull in excess solder. It needs to be manually installed. 10 pair high quality Female and Male XT60 Connectors.

Input current: 16a max, Output current: 10A MAX. Available with standard or anti-static bobbins. Conversion efficiency: 94% for reference: when Input 19V 2. 5a output 16V.

More information about NTE Electronics, Inc. SW02-10 #ad


Similar products



Signal Generator DIY Kit, KKmoon XR2206 High Precision Function Signal Generator DIY Kit Sine/Triangle/Square Output 1Hz-1MHz Adjustable Frequency

#ad
KKmoon MP26174598 #ad - Heat shrink 2:1 both red and Black Included - 2 Feet Total. Input voltage: dc 10v-32v, output voltage: DC12V-35Vadjustable. Easily charging for 60w, suitable for ac adapter, industrial grade -40 degree to + 80 degree work temperature, 90W etc. Adjustable frequency and amplitude. Coarse tuning & fine tuning】◕‿◕Frequency adjustment features coarse tuning and fine tuning.

All are through hole components, easy for installation. Power supply】◕‿◕wide power supply range, use 9-12V external power or 9V batteryNOT Included. Kkmoon sales】◕‿◕this product belongs to kkmoon. It needs to be manually installed. 10 pair high quality Female and Male XT60 Connectors. Specifications: voltage supply: 9-12v dc input waveforms: square, sine & triangle impedance: 600 ohm + 10% Frequency: 1Hz-1MHz SINE WAVE Amplitude: 0-3V at 9V DC Input Distortion: Less than 1% at 1KHz Flatness: +0

Signal Generator DIY Kit, KKmoon XR2206 High Precision Function Signal Generator DIY Kit Sine/Triangle/Square Output 1Hz-1MHz Adjustable Frequency #ad - 05db 1hz - 100khz square wave amplitude: 8v no load at 9v dc input rise time: less than 50ns at 1khz fall time: less than 30ns at 1khz symmetry: less than 5% at 1KHz TRIANGLE WAVE Amplitude: 0-3V at 9V DC Input Linearity: Less than 1% up to 100KHz 10mA Package Size: Approx. Wide power supply range, use 9-12V external power or 9V batteryNOT Included.

. 3 kinds of waveforms】◕‿◕High resolution, can generate sine/triangle/square waveforms.

More information about KKmoon MP26174598 #ad


Similar products



Organizer 2pcs 0.28" LED Voltmeter Ammeter, Red and Blue Digital Multimeter Display Voltage Current Tester,DC 0-100V 10A Detector Voltage Current Meter Panel Amp Volt Gauge

#ad
Organizer #ad - Input voltage: dc 10v-32v, output voltage: DC12V-35Vadjustable. Xt-60 connector for rc Lipo Batteries Drones Airplanes Cars Vehicles. Laptops which is less than 150W, power supply and so on. High-quality power management chip design, efficiency up to 96%, small inrush current, high reliability, small size, power up to 250W.

250w booster constant voltage constant current power converter module, input voltage: dc 10V-40V, Output Voltage: 10-50V; Input voltage: DC8. 5v-48v; input current: 10a MAX exceeds 8A please enhance heat dissipation. Temperature: -40 ~+ 85 ℃ ambient temperature is too high, automatically reduce the output voltage, please enhance heat dissipation with Overcurrent protection input over 13A, there is a range of errors.

Wide range of uses: can be diy to supply power to electronic devices to meet different needs, charge batteries, can regulate solar panels, lithium batteries, etc; driving high power LED lights. Installation method: 4*3mm screw holes; wiring method: wiring output; module size: x 70mm x 42mm x 13mm; module single weight: 50g.

Organizer 2pcs 0.28" LED Voltmeter Ammeter, Red and Blue Digital Multimeter Display Voltage Current Tester,DC 0-100V 10A Detector Voltage Current Meter Panel Amp Volt Gauge #ad - Parameter - input voltage range dc 6v-32v; output voltage dc 1. 5v-32v; max output current 5A, recommend use of within 4. 5a; max output power 75W, recommend use of within 50W. General use - as ordinary step-down module with over-current protection; as constant current LED driver module; DIY a solar power controller, etc.

Display - large clear digital LCD display voltage & current value simultaneously.

More information about Organizer #ad


Similar products



WHDTS 5A Boost Converter LCD Display, DC 11V-50V Step Up Power Supply Module Adjustable Boost Adapter CVCC Constant Coltage Constant Current Converter with Shell

#ad
WHDTS #ad - Available with standard or anti-static bobbins. 2. 2pcs accurate voltmeter ammeter dc0-100v voltage 10a current meter 2-in-1 Digital Multimeter 10A Volt Amp Tester Meter with 5 Wires 028" red and blue Dual LED Display. Adjustable frequency and amplitude. Coarse tuning & fine tuning】◕‿◕Frequency adjustment features coarse tuning and fine tuning.

All are through hole components, easy for installation. Power supply】◕‿◕wide power supply range, use 9-12V external power or 9V batteryNOT Included. Kkmoon sales】◕‿◕this product belongs to kkmoon. 3 kinds of waveforms】◕‿◕High resolution, can generate sine/triangle/square waveforms. Adjustable frequency & amplitude】◕‿◕Frequency range: 1Hz-1MHz.

WHDTS 5A Boost Converter LCD Display, DC 11V-50V Step Up Power Supply Module Adjustable Boost Adapter CVCC Constant Coltage Constant Current Converter with Shell #ad - The case is packaged unassembled to avoid damage during transit. Ou": overload output voltage alarm>50V. Conversion efficiency: 94% for reference: when Input 19V 2. 5a output 16V. Removes up to four times more solder than conventional wick, and extracts solder much faster than wicks based on Type-R fluxes. Using steps: please check product images and download "User Manual" on the Product Page Named "Technical Specification" Section Due To Character Limit for specific instruction.

More information about WHDTS #ad


Similar products