KNACRO DC-DC Voltage Regulator Buck Converter Module 6V 9V 12V 24V 30V 6V-35v to 5V 3A Single USB Port Output

#ad
KNACRO #ad - Operating temperature: -40~+85 ℃. No-load power consumption: less than 25MA. Dimensions: 59 * 21 * 11mm(L*W*H). It is equipped with single usb port, tablet, smart phones, can be used as a DIY USB charger for your power bank, etc. Over-temperature protection:YES. Overcurrent protection: Yes. Output voltage: 5VDC.

. Output Indicator: Yes. Module parameters: non-isolated buck regulator BUCK. Switching frequency: 180KHZ. Input voltage: 6-35VDC. Output current: 3a single USB, 2A for a long time within. This dc to dc converter module support 6-40V wide range voltage input and DC 5V 3A output. Conversion efficiency: 93% typ. It has high power conversion efficiency up to 92%.

KNACRO DC-DC Voltage Regulator Buck Converter Module 6V 9V 12V 24V 30V 6V-35v to 5V 3A Single USB Port Output #ad - Operating temperature: -40~+85 ℃. This dc to dc converter module support 6-40V wide range voltage input and DC 5V 3A output. It has high power conversion efficiency up to 92%. It is equipped with single usb port, tablet, smart phones, can be used as a DIY USB charger for your power bank, etc. Conversion efficiency: 93% typ.

More information about KNACRO #ad

Authentic Capricorn PTFE Bowden Tubing 1 Meter XS Series for 1.75mm Filament with PTFE Teflon Tube Cutter and Upgraded PC4-M6 and PC4-M10 Pneumatic Fittings with Metal Teeth and Blue Collet Clip

#ad
F1RST LAYER #ad - Many cheap printers come with sub-par PTFE not designed for 3D printers and this can result in poor extrusion and poor retraction artifacts on your 3D printed models. Standard ptfe tubing may experience dangerous "off-gassing" if the hotend is heated to temperatures beyond 240*C and will get worse with higher heats.

The extruder fittings are PC4-M6 and the hotend fittings are PC4-M10 The high manufacturing standards for Capricorn PTFE tubing ensure that all tolerances are very tight and uniform through the length of the Bowden tube. The upgraded fittings with metal teeth ensure the PTFE tubing will not pull out once firmly grasped by the upgraded stainless steel fittings.

Notice: this bundle of parts contains a range of parts, including capricorn ptfe tubing, and some other parts sourced by f1rst layer which, after extensive testing, have proven to provide better performance than stock parts on many chinese manufactured prinTERS. Not all parts in this package are manufactured by capricorn.

The tight tolerances make sure that the filament is lead directly to the hotend with as little room for error as possible between the extruder and the hotend. Capricorn ptfe xs series is rated for withstanding the highest temperatures in the market which is perfect for printing exotic filaments such as ABS, Nylon, and Polycarbonate.

Authentic Capricorn PTFE Bowden Tubing 1 Meter XS Series for 1.75mm Filament with PTFE Teflon Tube Cutter and Upgraded PC4-M6 and PC4-M10 Pneumatic Fittings with Metal Teeth and Blue Collet Clip #ad - Capricorn ptfe is well regarded as the highest quality ptFE tubing in all of 3D printing. This upgrade bundle is not only great value for money, it is also guaranteed to give immediate improvements to your printing experience due to every single item included being far superior to the cheap Chinese stock counterparts that came with your printer.

More information about F1RST LAYER #ad


Similar products



CERRXIAN 9Inch Mini USB Cable Combo Mini USB Right Angle & Left Angle Male to USB Type A 2.0 Right Angle Male Data Sync and Charge Cable Black2-Pack R

#ad
Lemeng 並行輸入品 #ad - 4. Supports hi-Speed USB 2. 0 transfer rate at up to 480 Mbps. 5. Usb 2. 0 type a male to mini usb male cable is an indispensable accessory for external hard drives, GPS, digital cameras, game controllers, or camcorders with the common Mini-B USB port.6. Angled usb connector ideal in situations where space is at a premium, and reduces stress / excessive bending on the cable7.

High-end pvc housing and compact connector, this flexible mini USB 2. 0 charging cable meets everyday connectivity needs at home, work. Package content:2 x USB Type A 2. 0 male to mini usb male cable capricorn ptfe is well regarded as the highest quality ptFE tubing in all of 3D printing. Features:1. Cable a: 1 x mini usb right Angle to USB Type A 2.

CERRXIAN 9Inch Mini USB Cable Combo Mini USB Right Angle & Left Angle Male to USB Type A 2.0 Right Angle Male Data Sync and Charge Cable Black2-Pack R #ad - 0 right angle Male Cable 2. Cable b: 1 x mini usb left angle to USB Type A 2. 0 right angle Male Cable3. Mini usb cable engineered with molded strain relief connectors for durability and grip treads for easy plugging and unplugging. A clip is also provided which drastically increases any hotends precision by eliminating any potential slippage of the Bowden tubing whilst extruding or retracting.

One ptfe cutter with an extra sharp razor is also included to ensure that the PTFE is cut flat on both sides to prevent any malfunctions or heat creep when feeding and retracting.

More information about Lemeng 並行輸入品 #ad


Similar products



Xiboya textile 3 Sets XT60 Parallel Battery Connector Cable for RC Multicopter Quadcopter

#ad
BM #ad - Super speed: supports high speed usb 2. 0 devices, data transfer speed at up to 480 Mbps, and is backwards compliant with full-speed USB 1. 1 12 mbps and low-speed USB 1. 0 1. 5 mbps. Standard ptfe tubing may experience dangerous "off-gassing" if the hotend is heated to temperatures beyond 240*C and will get worse with higher heats.

Weight: 23g/08 ozper cable. 100% brand new and high quality. Mini usb cable connect your devices with a mini B 5 pin connector, game controller, pda, such as an MP3 player, digital camera. Convenient and cost-effective 2-pack mini-USB cords provide spare or replacement Mini USB cables to keep at the desktop, in your accessory bag, or in the car.

Xiboya textile 3 Sets XT60 Parallel Battery Connector Cable for RC Multicopter Quadcopter #ad - 1x male xt60 and 2x female XT60 connections. Molded-strain relief construction for flexible movement, durability, and fit. The extruder fittings are PC4-M6 and the hotend fittings are PC4-M10 The tight tolerances make sure that the filament is lead directly to the hotend with as little room for error as possible between the extruder and the hotend.

Capricorn ptfe xs series is rated for withstanding the highest temperatures in the market which is perfect for printing exotic filaments such as ABS, Nylon, and Polycarbonate. Connects speed-critical devices, such as external hard drives and smart phones, and peripherals that require a Mini-B connection to your computer.

More information about BM #ad


Similar products



Capricorn Bowden PTFE Tubing XS Series 1 Meter for 1.75mm Filament Genuine Capricorn Premium Tubing

#ad
Capricorn #ad - Length: 1 Meter. Molded-strain relief construction for flexible movement, durability, and fit. Weight: 23g/08 ozper cable. Super speed: supports high speed usb 2. 0 devices, data transfer speed at up to 480 Mbps, and is backwards compliant with full-speed USB 1. 1 12 mbps and low-speed USB 1. 0 1. 5 mbps. This capricorn xs series is safe in 3D printer usage up to 300*C thanks to its proprietary manufacturing methods.

Upgraded pneumatic fittings with metal teeth provided in this package work much better than the stock options provided by many cheap 3D printer manufacturers with plastic teeth or cheap locking mechanisms. Od: 4. 0mm. 1x male xt60 and 2x female XT60 connections. 100% brand new and high quality. Mini usb cable connect your devices with a mini B 5 pin connector, such as an MP3 player, game controller, pda, digital camera.

Capricorn Bowden PTFE Tubing XS Series 1 Meter for 1.75mm Filament Genuine Capricorn Premium Tubing #ad - Convenient and cost-effective 2-pack mini-USB cords provide spare or replacement Mini USB cables to keep at the desktop, in your accessory bag, or in the car. Standard ptfe tubing may experience dangerous "off-gassing" if the hotend is heated to temperatures beyond 240*C and will get worse with higher heats.

Brand: Capricorn.

More information about Capricorn #ad


Similar products



OVERTURE PETG Filament 1.75mm with 3D Build Surface 200 x 200 mm 3D Printer Consumables, 1kg Spool 2.2lbs, Dimensional Accuracy +/- 0.05 mm, Fit Most FDM Printer, Black

#ad
OVERTURE #ad - Wire gauge:14AWG. Connects speed-critical devices, such as external hard drives and smart phones, and peripherals that require a Mini-B connection to your computer. If the effect is not good, it is recommended to try printing the draft before printing. Grid layout on the surface for easy resizing. This capricorn xs series is safe in 3D printer usage up to 300*C thanks to its proprietary manufacturing methods.

Upgraded pneumatic fittings with metal teeth provided in this package work much better than the stock options provided by many cheap 3D printer manufacturers with plastic teeth or cheap locking mechanisms. Complete drying for 24 hours before vacuum aluminum foil packaging, which can effectively protect the PETG filament from moisture.

OVERTURE PETG Filament 1.75mm with 3D Build Surface 200 x 200 mm 3D Printer Consumables, 1kg Spool 2.2lbs, Dimensional Accuracy +/- 0.05 mm, Fit Most FDM Printer, Black #ad - Cable is made of Silicon and heatproof 200℃. Od: 4. 0mm. Wire length: 10CM. The tight tolerances make sure that the filament is lead directly to the hotend with as little room for error as possible between the extruder and the hotend. Capricorn ptfe xs series is rated for withstanding the highest temperatures in the market which is perfect for printing exotic filaments such as ABS, Nylon, and Polycarbonate.

Check the temperature setting before printing, PETG filaments have higher extrusion temperature than that of PLA;2. Length: 1 Meter.

More information about OVERTURE #ad


Similar products



eBoot 6 Pack LM2596 DC to DC Buck Converter 3.0-40V to 1.5-35V Power Supply Step Down Module 6 Pack

#ad
eBoot EXPSFD005794 #ad - Cost-effective and wide compatibility】 with over 8 years' 3d filaments r & d experience, Ender 3, Overture is capable of manufacturing all kinds of filaments in large scale with premium quality, thousands tons of filaments output every month, which contribute to Overture filament cost-effective and reliable for most common 3D printers, such as MK3, Monoprice FlashForge and more.

Input: dc 3 v to 40 v input voltage must be 1. 5 v higher than the output voltage, no boost. Keep it under 2. 5 a and use the heat sink when working for long hours. Steps: connect to power source, adjust the swirl button on the blue potentiometer and monitor voltage with multimeter to get the needed voltage The factory have tested these at max voltage so they are very high by default, takes about 15-20 turns CCW before the voltage starts ramping down.

eBoot 6 Pack LM2596 DC to DC Buck Converter 3.0-40V to 1.5-35V Power Supply Step Down Module 6 Pack #ad - This capricorn xs series is safe in 3D printer usage up to 300*C thanks to its proprietary manufacturing methods. Upgraded pneumatic fittings with metal teeth provided in this package work much better than the stock options provided by many cheap 3D printer manufacturers with plastic teeth or cheap locking mechanisms.

Capricorn ptfe is well regarded as the highest quality ptFE tubing in all of 3D printing. Quantity: 6 pieces; size: 45 * 20 * 14 mm with potentiometer. 1x male xt60 and 2x female XT60 connections.

More information about eBoot EXPSFD005794 #ad


Similar products



Element14 Raspberry Pi 3 B+ Motherboard

#ad
Element14 Raspberry Pi 3 Model B+ #ad - Grid layout on the surface for easy resizing. Id: 1. 95mm ± 005mm. 4 usb ports, full hdmi port, 40 gpio pins, Combined 3.5mm audio jack and composite video. Camera interface csi, micro sd card slot now push-pull rather than push-push, display interface dsI, VideoCore IV 3D graphics core. Output: dc 1. 5 v to 35 v voltage is continuously adjustable, maximum output current is 3 A.

1. 4ghz 64-bit quad-core armv8 CPU, 1 GB RAM. 1 kg petg spool x 1 & build surface x 1】 each petg spool comes with 1 piece of quality 200 × 200 mm / 7. 88'' × 7. 88'' build surface to support Overture filaments. As the petg material is sensitive to moisture, please remember to put it back into the re-sealable aluminum foil bag timely after using to maintain excellent printing result.

Element14 Raspberry Pi 3 B+ Motherboard #ad - Bluetooth 4. 2, bluetooth Low Energy. Cable is made of Silicon and heatproof 200℃. A clip is also provided which drastically increases any hotends precision by eliminating any potential slippage of the Bowden tubing whilst extruding or retracting. One ptfe cutter with an extra sharp razor is also included to ensure that the PTFE is cut flat on both sides to prevent any malfunctions or heat creep when feeding and retracting.

1 meter in length PTFE tubing.

More information about Element14 Raspberry Pi 3 Model B+ #ad


Similar products



A1 FFCs Black Flex Cable for Raspberry Pi Camera - 60 cm / 2 ft 1

#ad
A1 FFCs NA #ad - A clip is also provided which drastically increases any hotends precision by eliminating any potential slippage of the Bowden tubing whilst extruding or retracting. One ptfe cutter with an extra sharp razor is also included to ensure that the PTFE is cut flat on both sides to prevent any malfunctions or heat creep when feeding and retracting.

1 meter in length PTFE tubing. The extruder fittings are PC4-M6 and the hotend fittings are PC4-M10 Be careful when opening and closing the connectors because they are easy to break if too much force is used. 802. 11n wireless lan, 10/100Mbps Lan Speed. Ffc has 15 pins with a 1. 0 mm pitch. As the petg material is sensitive to moisture, please remember to put it back into the re-sealable aluminum foil bag timely after using to maintain excellent printing result.

A1 FFCs Black Flex Cable for Raspberry Pi Camera - 60 cm / 2 ft 1 #ad - Steps: connect to power source, adjust the swirl button on the blue potentiometer and monitor voltage with multimeter to get the needed voltage The factory have tested these at max voltage so they are very high by default, takes about 15-20 turns CCW before the voltage starts ramping down. Quantity: 6 pieces; size: 45 * 20 * 14 mm with potentiometer.

Brand: Capricorn. Has blue stiffeners at each end to make installation a breeze.

More information about A1 FFCs NA #ad


Similar products



EDGELEC 120pcs Breadboard Jumper Wires 10cm 15cm 20cm 30cm 40cm 50cm 100cm Optional Arduino Wire Dupont Cable Assorted Kit Male to Female Male to Male Female to Female Multicolored Ribbon Cables

#ad
EDGELEC ED-DP_L20_Mix_120pcs #ad - Od: 4. 0mm. 1x male xt60 and 2x female XT60 connections. Package include: 20cm 7. 9inch / 40pin female to female jumper wires / 40pin male to female jumper wires / 40pin Male to Male jumper wires Total 120pcs Capricorn ptfe is well regarded as the highest quality ptFE tubing in all of 3D printing. Cable length: 20cm 7.

9 inch / cable material: 12-core pure copper wire. Steps: connect to power source, adjust the swirl button on the blue potentiometer and monitor voltage with multimeter to get the needed voltage The factory have tested these at max voltage so they are very high by default, takes about 15-20 turns CCW before the voltage starts ramping down.

EDGELEC 120pcs Breadboard Jumper Wires 10cm 15cm 20cm 30cm 40cm 50cm 100cm Optional Arduino Wire Dupont Cable Assorted Kit Male to Female Male to Male Female to Female Multicolored Ribbon Cables #ad - Id: 1. 95mm ± 005mm. 4 usb ports, 40 gpio pins, full hdmi port, Combined 3.5mm audio jack and composite video. Camera interface csi, display interface dsI, Micro SD card slot now push-pull rather than push-push, VideoCore IV 3D graphics core.4x as long as the standard Raspberry Pi camera cable at 60 cm / 2 ft long.

Complete drying for 24 hours before vacuum aluminum foil packaging, which can effectively protect the PETG filament from moisture. 100% brand new and high quality. Mini usb cable connect your devices with a mini B 5 pin connector, game controller, such as an MP3 player, pda, digital camera.

More information about EDGELEC ED-DP_L20_Mix_120pcs #ad


Similar products



Padarsey 2 Pair XT60 Connector Female/Male W/Housing 10CM Silicon Wire 14AWG

#ad
Padarsey #ad - 1 kg petg spool x 1 & build surface x 1】 each petg spool comes with 1 piece of quality 200 × 200 mm / 7. 88'' × 7. 88'' build surface to support Overture filaments. 4 usb ports, 40 gpio pins, full hdmi port, Combined 3.5mm audio jack and composite video. Camera interface csi, micro sd card slot now push-pull rather than push-push, display interface dsI, VideoCore IV 3D graphics core.

4x as long as the standard Raspberry Pi camera cable at 60 cm / 2 ft long. Bluetooth 4. 2, bluetooth Low Energy. Connects speed-critical devices, such as external hard drives and smart phones, and peripherals that require a Mini-B connection to your computer. Features: all use sanyo solid-state capacitors, 36 u thickening circuit boards, high-Q inductance with LED indicator output.

Molded-strain relief construction for flexible movement, durability, and fit. Has blue stiffeners at each end to make installation a breeze. Package include:2 * xt60 male+ 2 * xt60 female w/14awg silicon Wire 10cm Capricorn ptfe is well regarded as the highest quality ptFE tubing in all of 3D printing. Less- tangle and easy to use】 full mechanical winding and strict manual examination, which guarantee the PETG filaments tidy and easy to be fed; Larger spool inner diameter design makes feeding smoother.

Padarsey 2 Pair XT60 Connector Female/Male W/Housing 10CM Silicon Wire 14AWG #ad - Cost-effective and wide compatibility】 with over 8 years' 3d filaments r & d experience, thousands tons of filaments output every month, Overture is capable of manufacturing all kinds of filaments in large scale with premium quality, such as MK3, which contribute to Overture filament cost-effective and reliable for most common 3D printers, Ender 3, Monoprice FlashForge and more.

More information about Padarsey #ad


Similar products