Onyehn 3pcs for Wemos D1 Mini Battery Shield Micro USB Single Lithium Battery Charging Boost Module with Pins LED Indicator 5V 1A DC

#ad
Onyehn #ad - Connect to lithium Battery normal 3. 3-4. 2v 2. Description: you can use d1 mini without usb cable, just connect lithium battery to this shield, power supply for the entire D1 mini system Charging, it's really wireless now Put D1 mini anywhere, when the battery run out, using this battery shield and a lithium Battery Boost, you do not need to unplug the battery, just using usb port to charging.

Red led, lights when charging package include: 3 PCS D1 mini Charging board D1 mini single Lithium Battery Charging Board. Boost power supply: 5Vmax: 1A. 1. Red led, lights when charging. Lithium battery voltage: 3. 3-4. 2v. Green led, lights when charging is completed. Green led, lights when charging is completed 4.

Onyehn 3pcs for Wemos D1 Mini Battery Shield Micro USB Single Lithium Battery Charging Boost Module with Pins LED Indicator 5V 1A DC #ad - Charging port normal 5V 3.

More information about Onyehn #ad

IZOKEE D1 Mini NodeMcu Lua 4M Bytes WLAN WiFi Internet Development Board Base on ESP8266 ESP-12F for Arduino, 100% Compatible with WeMos D1 Mini Pack of 5

#ad
IZOKEE IZKE29-5 #ad - 5v 1a switching power supply onboard. 1 micro USB connection. Installing hardware package "Boards Manager or GIT". 1 analog input 3. 3v max input. We recommend using GIT, you can always get the latest version. Just choose izokee: your expert for micro-electronics! one-stop-shopping with various electronic modules & Components! " IZOKEE D1 Mini NodeMcu Lua WLAN WIFI Internet Development Board Product Specification: Main Chip: ESP8266 CH340G.

11 digital input/output pins, all pins have interrupt/pwm/I2C/one-wire and a micro-USB connection. Wifi development Board, 4M bytes. On linux & mac osx, you don't need install it, comes preinstalled with OS. Python on windows you need install Python 2. 7. 10 Support OTA on line. Supported except D0 How to get it started in arduino: - Setup driver Before you use mini D1 boards, you need set up CH340g driver.

IZOKEE D1 Mini NodeMcu Lua 4M Bytes WLAN WiFi Internet Development Board Base on ESP8266 ESP-12F for Arduino, 100% Compatible with WeMos D1 Mini Pack of 5 #ad - Package includes: 5 x d1 mini nodemcu lua wlan wifi internet Development Board This d1 mini module is a mini WIFI board based on ESP-8266EX. This wlan board contains 11 digital input / pwm / i2C / output pins, all pins have interrupt / 1-wire and a micro-USB connection. Our d1 mini development board is 100% compatible with Arduino WeMos and can be programmed in the Arduino IDE.

More information about IZOKEE IZKE29-5 #ad


Similar products



MakerFocus 4pcs 3.7V Lithium Rechargable Battery JST1.25 Connector 2pin, 852540 3.7V 1000mAh Battery with Protection Board and Insulated Rubber Tape Compatible with ESP32 Development Board WiFi Kit

#ad
MakerFocus #ad - 4pcs 3. 7v lithium rechargable Battery, 852540 3. 7v 1000mah battery with protection board and insulated Rubber Tape Matched with ESP32 Development Board WIFI Kits for Arduino NodemcuFeatures:1. Working Current: 1. 5a. Note: the maximum operating current of this battery is only about 1A, can not be used for unmanned aerial vehicles, model aircraft or power tools and other products that require high current.

2. Thanks a ton for every customer's suggestion and support. Note2: the maximum operating current of this battery is only about 1A, cannot be used for unmanned aerial vehicles, model aircraft or power tools and other products that require high current. Usage: this product interface is jst1. 25 pitch male, it can be matched with some ESP32 Development Board that it come with Female JST 1.

MakerFocus 4pcs 3.7V Lithium Rechargable Battery JST1.25 Connector 2pin, 852540 3.7V 1000mAh Battery with Protection Board and Insulated Rubber Tape Compatible with ESP32 Development Board WiFi Kit #ad - 25 mm connectors. Standard charging method: charging this battery to 4. 25v at 02c constant current, then charge the battery at a constant voltage of 4. 2v till it's charging current≤ 005c.

More information about MakerFocus #ad


Similar products



IZOKEE D1 Mini NodeMcu Lua 4M Bytes WLAN WiFi Internet Development Board Base on ESP8266 ESP-12F for Arduino, 100% Compatible with WeMos D1 Mini Pack of 3

#ad
IZOKEE IZKE29-3 #ad - Python on windows you need install Python 2. 7. 10 Wifi development Board, 4M bytes. 5v 1a switching power supply onboard. 1 micro USB connection. 11 digital input/output pins, all pins have interrupt/pwm/I2C/one-wire and a micro-USB connection. Support OTA on line. Installing hardware package "Boards Manager or GIT".

Package includes: 3 x d1 mini nodemcu lua wlan wifi internet Development Board This d1 mini module is a mini WIFI board based on ESP-8266EX. This wlan board contains 11 digital input / output pins, all pins have interrupt / pwm / i2C / 1-wire and a micro-USB connection. Our d1 mini development board is 100% compatible with Arduino WeMos and can be programmed in the Arduino IDE.

IZOKEE D1 Mini NodeMcu Lua 4M Bytes WLAN WiFi Internet Development Board Base on ESP8266 ESP-12F for Arduino, 100% Compatible with WeMos D1 Mini Pack of 3 #ad - Note1: after some customers reflected the reversed connectors, so all the new batteries are correct correct polarity now, we have modified the connectors now, you don't need to switch the polarity of the two wires. Charge current time: standard charging: 02c 8 hours; Fast charging: 05c 2. 5 hours. This d1 mini module is a mini WIFI board based on ESP-8266EX.

This wlan board contains 11 digital input / pwm / i2C / output pins, all pins have interrupt / 1-wire and a micro-USB connection.

More information about IZOKEE IZKE29-3 #ad


Similar products



Ximimark 5Sets WeMos D1 Mini Prototype Board XD-08 ProtoBoard Shield Double Sided Perf Board for Arduino

#ad
Ximimark #ad - Thanks a ton for every customer's suggestion and support. Note2: the maximum operating current of this battery is only about 1A, cannot be used for unmanned aerial vehicles, model aircraft or power tools and other products that require high current. Usage: this product interface is jst1. 25 pitch male, it can be matched with some ESP32 Development Board that it come with Female JST 1.

25 mm connectors. Standard charging method: charging this battery to 4. 25v at 02c constant current, then charge the battery at a constant voltage of 4. 2v till it's charging current≤ 005c. Working Current: 1. 5a. Package includes: 5sets 1 set of list: long female pins x2pcs short female pins x2pcs Normal pins x2pcs ProtoBoard Shield x1pcs This d1 mini module is a mini WIFI board based on ESP-8266EX.

Ximimark 5Sets WeMos D1 Mini Prototype Board XD-08 ProtoBoard Shield Double Sided Perf Board for Arduino #ad - This wlan board contains 11 digital input / i2C / pwm / output pins, all pins have interrupt / 1-wire and a micro-USB connection. Our d1 mini development board is 100% compatible with Arduino WeMos and can be programmed in the Arduino IDE. Note1: after some customers reflected the reversed connectors, we have modified the connectors now, so all the new batteries are correct correct polarity now, you don't need to switch the polarity of the two wires.

Please check size in detail before purchase.

More information about Ximimark #ad


Similar products



Organizer ESP8266 ESP-12 ESP-12F NodeMcu Mini D1 Module WeMos Lua 4M Bytes WLAN WiFi Internet Development Board Base on ESP8266 ESP-12F for Arduino,Compatible with WeMos D1 Mini 5pcs

#ad
Organizer #ad - 5v 1a switching power supply onboard. Installing hardware package "Boards Manager or GIT". Package includes: 5 x d1 mini nodemcu lua wlan wifi internet Development Board This d1 mini module is a mini WIFI board based on ESP-8266EX. This wlan board contains 11 digital input / output pins, all pins have interrupt / i2C / pwm / 1-wire and a micro-USB connection.

Our d1 mini development board is 100% compatible with Arduino WeMos and can be programmed in the Arduino IDE. Note1: after some customers reflected the reversed connectors, so all the new batteries are correct correct polarity now, we have modified the connectors now, you don't need to switch the polarity of the two wires.

Organizer ESP8266 ESP-12 ESP-12F NodeMcu Mini D1 Module WeMos Lua 4M Bytes WLAN WiFi Internet Development Board Base on ESP8266 ESP-12F for Arduino,Compatible with WeMos D1 Mini 5pcs #ad - Product specification: main Chip: ESP8266 CH340G. 11 digital input / pwm / output pins, all pins with interrupt / i2c / support 1 line except D0; 1 analog input3.2v max input. 11 digital input/output pins, all pins have interrupt/pwm/I2C/one-wire and a micro-USB connection. 1 analog input 3. 3v max input. Micro usb connection; compatible with Arduino; 1MB Flash; 500mA resettable fuse.

Wifi development board, 4m bytes. 5v 1a switching power supply switching power supply)onboard.

More information about Organizer #ad


Similar products



HiLetgo 3pcs 5V D1 Mini Relay Shield 5V D1 Mini Relay Module for WeMos D1

#ad
HiLetgo #ad - Nc: 3a250vac/30vdc, max:750va/90W. Relay module for WeMos D1. Wemos d1 mini relay shield 5v d1 mini relay module for WeMos D1 Description: 5V Relay Shield, use relay to control other equipment. Micro usb connection; compatible with Arduino; 1MB Flash; 500mA resettable fuse. Wifi development board, 4m bytes. 5v 1a switching power supply switching power supply)onboard.

Our d1 mini development board compatible with Arduino WeMos and can be programmed in the Arduino IDE. Wemos d1 mini relay shield 5V D1 mini Relay Module. Features: no: 5a250vac/30vdc, 10a125vac, max:1250va/150w nc: 3a250vac/30vdc, max:750va/90w package included: 3* wemos d1 mini relay Shield This d1 mini module is a mini WIFI board based on ESP-8266EX.

HiLetgo 3pcs 5V D1 Mini Relay Shield 5V D1 Mini Relay Module for WeMos D1 #ad - This wlan board contains 11 digital input / output pins, all pins have interrupt / pwm / i2C / 1-wire and a micro-USB connection. Our d1 mini development board is 100% compatible with Arduino WeMos and can be programmed in the Arduino IDE. Note1: after some customers reflected the reversed connectors, so all the new batteries are correct correct polarity now, we have modified the connectors now, you don't need to switch the polarity of the two wires.

Working Current: 1. 5a. 11 digital input / i2c / output pins, all pins with interrupt / pwm / support 1 line except D0; 1 analog input3.

More information about HiLetgo #ad


Similar products



ACROBOTIC WeMos ESP8266 D1 Mini 2×1 Dual Base Board Shield for Arduino NodeMCU Raspberry Pi Wi-Fi IoT

#ad
ACROBOTIC Industries ACR-00008 #ad - Different users have different applications for the WeMos shields, thus we've found that the easiest way to please everyone is to ship the boards with the headers unsoldered. This is especially useful when you have multiple shields that are not suited for stacking together such as an OLED shield with sensor/relay shields, or where a lower profile is preferred.

In addition, the design includes six mounting holes for securing it in place, something lacking on the actual WeMos D1 Mini boards and shields. Wemos d1 mini Relay Shield. Useful for working with shields like OLED or relay that can only be stacked on top. The wemos family is a great solution for building projects quickly using the ESP8266 SoC.

ACROBOTIC WeMos ESP8266 D1 Mini 2×1 Dual Base Board Shield for Arduino NodeMCU Raspberry Pi Wi-Fi IoT #ad - 11 digital input / i2c / output pins, all pins with interrupt / pwm / support 1 line except D0; 1 analog input3.2v max input. No: 5a250vac/30vdc, 10a125vac, max:1250va/150W. Working Current: 1. 5a. Easiest way to reduce the overall height of your WeMos D1 Mini project for Arduino, NodeMCU, AT+Commands Plug and Play.

Nc: 3a250vac/30vdc, max:750va/90W. The wemos d1 mini 2×1 dual base board shield allows you to connect shields to the WeMos D1 Mini without having to stack them on top of it.

More information about ACROBOTIC Industries ACR-00008 #ad


Similar products



ESP8266 NodeMcu ESP8266 Module 4pcs,ESP-12E NodeMcu LUA CP2102 Internet WiFi Development Board Works with Arduino IDE/Micropython

#ad
ETMall 8541549716 #ad - Micro usb connection; compatible with Arduino; 1MB Flash; 500mA resettable fuse. Wifi development board, 4m bytes. 5v 1a switching power supply switching power supply)onboard. Our d1 mini development board compatible with Arduino WeMos and can be programmed in the Arduino IDE. Wemos d1 mini relay shield 5V D1 mini Relay Module.

Download the Arduino IDE, the latest version. 2. Load, compile and upload. More information about it, refer to: https://github. Com/espressif/esptool/wiki/SPI-Flash-Modes. Feature: esp8266 nodemcu board has powerful on-board processing and storage capabilities, allows to be integrated with sensors and other specific applicated devices through its GPIOs.

ESP8266 NodeMcu ESP8266 Module 4pcs,ESP-12E NodeMcu LUA CP2102 Internet WiFi Development Board Works with Arduino IDE/Micropython #ad - High quality & guaranteed:60 days money back guarantee for any quality reasons, and 24-hour customer service. 5. Nc: 3a250vac/30vdc, max:750va/90W. Working Current: 1. 5a. Connect different WeMos boards side-by-side with ease. Documentation, tutorials, demos: https://youtube.

More information about ETMall 8541549716 #ad


Similar products



D1 Mini NodeMcu Lua 4M Bytes WiFi Internet Development Board WLAN Module Base on ESP8266 ESP-12F Compatible for Arduino WeMos D1 Mini Pack of 6

#ad
Devsolution #ad - This d1 mini module is a mini WIFI board based on ESP-8266EX. This wlan board contains 11 digital input / i2C / output pins, all pins have interrupt / pwm / 1-wire and a micro-USB connection. Our d1 mini development board is 100% compatible with Arduino WeMos and can be programmed in the Arduino IDE. Note1: after some customers reflected the reversed connectors, we have modified the connectors now, so all the new batteries are correct correct polarity now, you don't need to switch the polarity of the two wires.

Wemos d1 mini Relay Shield. On linux & mac osx, you don't need install it, comes preinstalled with OS. Easiest way to reduce the overall height of your WeMos D1 Mini project for Arduino, NodeMCU, AT+Commands Plug and Play. Useful for working with shields like OLED or relay that can only be stacked on top. Python: on windows you need install Python 2.

D1 Mini NodeMcu Lua 4M Bytes WiFi Internet Development Board WLAN Module Base on ESP8266 ESP-12F Compatible for Arduino WeMos D1 Mini Pack of 6 #ad - 7. 10 Installing with git recommend: we recommend using GIT to install Hardware package, you can always get the latest version of it. Installing hardware package: there is two ways to install hardware package, Boards Manager or GIT Installing with Boards Manager: Starting with 1. 6. 4, arduino allows installation of third-party platform packages using Boards Manager.

More information about Devsolution #ad


Similar products



Shappy 20 Pieces Micro JST PH 2.0 2-Pin Connector Plug Male and 20 Pieces 10 cm Red and Black Silicone Cable Wire with Female Connector

#ad
Shappy #ad - Applicable to: suit well for Li-Po batteries balance charger plug, these micro JST PH 2. 0 2-pin connectors are good partners for helicopter, air plane, quadcopter, boat and car controller. Why esp8266:esp8266 is a highly integrated chip designed for the needs of a new connected world. It offers a complete and self-contained Wi-Fi networking solution, allowing it to either host the application or to offload all Wi-Fi networking functions from another application processor.

Firmware link: https://github. Com/nodemcu/nodemcu-firmware;The Data download access to the website: http://www. Nodemcu. Com; test Video:https://www. Youtube. Com/watch?v=Gh_pgqjfeQc. Four spi flash access modes:the esp8266 support four different spi flash access modes: dio, dout, qIO & QOUT. 10 cm/ 3. 9 inches in length female connector length is not included, micro size can meet your needs.

Shappy 20 Pieces Micro JST PH 2.0 2-Pin Connector Plug Male and 20 Pieces 10 cm Red and Black Silicone Cable Wire with Female Connector #ad - The cable wire type is 24 AWG, each is approx. This d1 mini module is a mini WIFI board based on ESP-8266EX. This wlan board contains 11 digital input / pwm / output pins, all pins have interrupt / i2C / 1-wire and a micro-USB connection.

More information about Shappy #ad


Similar products