TeOhk DC-DC 250W Booster Constant Voltage Constant Current Power Converter Module Adjustable Step-Up Power Supply Module LED Driver

#ad
TeOhk #ad - Working temperature: -40~+85 degrees enhance heat dissipation when the ambient temperature is too high Operating frequency: 150KHz conversion efficiency: up to 96% efficiency related to input, voltage difference Overcurrent protection: Yes input over 13A, automatically reduce the output voltage, current, output voltage, there is a range of errors.

Input reverse connection protection: yes, less than 5a, small inrush current, please input the diode in the input Installation method: 4 3mm screw holes Wiring method: wiring output module size: length 70mm width 42mm height 13mm module single weight: 50 grams High-quality power management chip design, efficiency up to 96%, high reliability, if you need more reverse current, small size, power up to 250W.

TeOhk DC-DC 250W Booster Constant Voltage Constant Current Power Converter Module Adjustable Step-Up Power Supply Module LED Driver #ad - 250w booster constant voltage constant current power converter module, input voltage: dc 10V-40V, Output Voltage: 10-50V; Input voltage: DC8. 5v-48v; input current: 10a MAX exceeds 8A please enhance heat dissipation. Temperature: -40 ~+ 85 ℃ ambient temperature is too high, automatically reduce the output voltage, please enhance heat dissipation with Overcurrent protection input over 13A, there is a range of errors.

Wide range of uses: can be diy to supply power to electronic devices to meet different needs, charge batteries, lithium batteries, can regulate solar panels, etc; driving high power LED lights. Installation method: 4*3mm screw holes; wiring method: wiring output; module size: x 70mm x 42mm x 13mm; module single weight: 50g.

Product parameters module name 250w boost constant current module Modularity: Non-isolated boost module BOOST Input Voltage: DC8. 5v-48v input current: 10a max exceeds 8a, please strengthen the heat dissipation related to the input and output voltage difference, the larger the differential pressure, please strengthen the heat Static working current: 10mA 12V liters 20V, the static current will increase Output voltage: 10-50V continuously adjustable 12-80V fixed output for volume customers Output current: 10A MAX More than 6A, the higher the output voltage, the smaller the output current Constant current range: 0.

More information about TeOhk #ad

WeiMeet RFP30N06LE 30A 60V N-Channel Power Mosfet TO-220 ESD Rated for Arduino10 Pieces

#ad
WeiMeet #ad - Special process technology for high ESD capability. Weimeet n-channel power mosfet to-220 30a 60v esd rated, metal oxide pet feature: logic level gate conduction mode: enhancement mode voltage & current: 60v 30a package include: 10 x N-Channel Power Mosfet TO-220 30A 60V RFP30N06LE Rfp30n06le 30a, Avalanche Rated for Arduino10 Pieces Specification: Poduct Name: N-Channel Power Mosfet PET Type: Mosfet N-Channel, esd rated, 0.

047 ohm, rdson = 0047Ω, 60v, avalanche rated, 2KV ESD protected. Fet type: mosfet n-Channel, metal oxide; logic level gate. Good stability and uniformity with high EAS. Wide application:power Switching application; hard switched, high frequency circuits and uninterruptible power supply.

More information about WeiMeet #ad


Similar products



6 Pack LM2596 DC to DC Buck Converter 3.0-40V to 1.5-35V Power Supply Step Down Module 6 Pack

#ad
eBoot EXPSFD005794 #ad - Features: all use sanyo solid-state capacitors, 36 u thickening circuit boards, high-Q inductance with LED indicator output. Keep it under 2. 5 a and use the heat sink when working for long hours. Rfp30n06le 30a, esd rated, 0047 ohm, rdson = 0047Ω, 60v, avalanche rated, 2KV ESD protected. Fet type: mosfet n-Channel, metal oxide; logic level gate.

Steps: connect to power source, adjust the swirl button on the blue potentiometer and monitor voltage with multimeter to get the needed voltage The factory have tested these at max voltage so they are very high by default, takes about 15-20 turns CCW before the voltage starts ramping down. Input: dc 3 v to 40 v input voltage must be 1.

6 Pack LM2596 DC to DC Buck Converter 3.0-40V to 1.5-35V Power Supply Step Down Module 6 Pack #ad - 5 v higher than the output voltage, no boost. Special process technology for high ESD capability. Output: dc 1. 5 v to 35 v voltage is continuously adjustable, maximum output current is 3 A. Good stability and uniformity with high EAS. Wide application:power Switching application; hard switched, high frequency circuits and uninterruptible power supply.

Eboot 6 pack lm2596 dc to DC Buck Converter 3. 0-40v to 1.

More information about eBoot EXPSFD005794 #ad


Similar products



Real 18AWG 43x2pcs Copper Strands 10 Pairs DC Power Pigtail Cable Wire, 12V 5A Male & Female Connectors for CCTV Security Camera and Lighting Power Adapter by MILAPEAK 2.1mm x 5.5mm, Ultra Thick

#ad
MILAPEAK 57101 #ad - Good stability and uniformity with high EAS. Tin solder at tail is easy to weld! Specification: - DC Plug: 5. 5mm*2. 1mm - total length: 9. 5 inch - wire gauge: 18awg - current: 5a 12v - operating temperature: -50°c to + 65°c - joint polarity: redpositive / blacknegative - wire material: pure copper core high quality oxygen free copper / non recovery copper - Joint material: arc quenched pure copper + galvanized non iron head - Plastic material: new flame retardant / anti riot sun / antioxidant / anti-aging PVC plastic Warranty - 1 Year Free Warranty - 30 Days return Package Contents 10 x Red/Black Male Pigtails DC Power Plug Pigtail Cable 10 x Red/Black Female Pigtails DC Power Plug Pigtail Cable If you have any query, please do not hesitate to contact us and we will be happy to serve you.

They are fairly long too, 11" total, 9. 5" of wire. Compatibility】- easy dc power solution, compatible with all cctv systems and other 2. 1*5. 5mm dc power devices like part lighting or led strips. Wide application:power Switching application; hard switched, high frequency circuits and uninterruptible power supply.

Real 18AWG 43x2pcs Copper Strands 10 Pairs DC Power Pigtail Cable Wire, 12V 5A Male & Female Connectors for CCTV Security Camera and Lighting Power Adapter by MILAPEAK 2.1mm x 5.5mm, Ultra Thick #ad - Also features two wires on the other Red Black wire jackets indicate polarity. Output: dc 1. 5 v to 35 v voltage is continuously adjustable, maximum output current is 3 A.

More information about MILAPEAK 57101 #ad


Similar products