High power high efficiency: discharge efficiency up to 96%. Super material: it is made of electronic accessories, nickel plating on surfaceanti-oxidatioan, inner conductor: pure copper. It is long lasting and durable for you to use. Package including: 2 pack of module. Lithium battery protection function: over-current, over-temperature, overvoltage, automatically close the output after 30 seconds;If the load is greater than 50MA, short circuit protection.
XLX 2PCS 2A 5V Charge and Discharge Integrated Module 3.7v / 4.2v Lithium Booster Mobile Power Supply Charge and Discharge Protection Converter for Fast Charging and Household Power Systems #ad - The first time the load is connected, the output is automatically turned on. Gnd: negative input for charging port - 3. Gnd: lithium battery - 4. Even if the output is short circuit, it will not burn out the module and it is safer. Multifunctional and safe: 4 in 1 charging / discharging / lithium battery protection / battery level indicator Module.
Vout: output output is positive 7.
More information about XLX #ad
McIgIcM 5pcs Micro USB 5V 1A 18650 TP4056 Lithium Battery Charger Module Charging Board with Protection Dual Functions 1A Li-ionMcIgIcM 4330196305 #ad - 2. Mini usb input terminal with a female, and still retains the input voltage wiring pads, can be directly input to do with the phone charger rechargeable lithium battery, can be very convenient DIY. Battery overcurrent protection current: 3A 8. It can be used for voltage 3. 6 3. 7v, etc. 3. Input voltage: 5V 4. Battery over-discharge protection voltage: 2.
5v 7. Maximum charge current: 1000mA 6. Board size : 17. 16 mm x 26. 17 mm micro usb lithium battery charging board with overcharge, overdischarge and overcurrent protection. Input voltage: dc5v, charging cut-off Voltage: 4. 2v maximum charging Current: 1A. 1. 18650, polymer and other lithium battery charge and discharge protection.
McIgIcM 5pcs Micro USB 5V 1A 18650 TP4056 Lithium Battery Charger Module Charging Board with Protection Dual Functions 1A Li-ion #ad - . Charging cut-off voltage: 4. 2v 5. Current: 3a, board size: 26 x 17mm/1.
More information about McIgIcM 4330196305 #ad
Icstation Boost Converter MT3608 Mico USB DC 2V-24V to 5V-28V 2A, Voltage Regulator,Power Supply Step Up Module 3.3V 5V 6V 9V 12V to 5V 6V 9V 12V 24V (Pack of 4) #ad
HiLetgo 10pcs 18650 Battery Clip 18650 Battery Holder 18650 Batteries Case for 18650 Battery with Connect Lead Arduino Raspberry Pi #ad
abcGoodefg 1Slot 3.7V 18650 Battery Holder Case Plastic Battery Storage Box with Pin 10 Pack (10 Pcs 1 Solts) #ad
Icstation Bluetooth Receiver Board BT 5.0 Stereo Audio Amplifier 2x5W Mini Power Amp Module 3.7-5V for DIY Wireless Speaker #ad
WOWOONE dc to dc Step up Converter DC Voltage Regulator Voltage Converter Step Up dc Boost Converter USB Power Module Supply Module 2V-24V to 5V-28V 2A MT3608 Mico USB (Pack of 10) #ad
ALLPOWERS 2 Pieces 2.5W 5V/500mAh Solar Panel DIY Battery Charger Kit Mini Encapsulated Solar Cell Epoxy for Battery Power LED 130x150mm (Solar Panel Only) #ad
MakerFocus 6pcs 2A 5V Charge Discharge Integrated Module 3.7V 4.2V for 186 50 Lithium Battery Charging Boost Mobile Power Protection PCB Board Module #ad
5 Pack Boost Converter Module XL6009 DC to DC 3.0-30 V to 5-35 V Output Voltage Adjustable Step-up Circuit Board (5 Pack) #ad
Thermaltronics FBA_TMT-TC-2 Lead Free Tip Tinner, 20 g in 0.8 oz. ContainerThermaltronics FBA_TMT-TC-2 #ad - No-clean compatible formulation. Minimal residues. On-board micro usb and soldering joints 5V input`port and charging status indicatorred indicator is charging, green indicator is full charged. It has a self adhesive pad on the underside to allow it to be affixed on, or near the work station. Thermaltronics tmt-tc-2 tip tinners is a compressed tablet of pure tin and ammonia phosphate formulation in a metal container with lid.
Thermaltronics tmt-tc-2 tip tinners provides fast, efficient cleaning and re-tinning of blackened and highly oxidized soldering iron tips, safely and efficiently. Current: 3a, board size: 26 x 17mm/1. 02 x 067inchL*W. Micro usb lithium battery charging board with overcharge, overdischarge and overcurrent protection.
Thermaltronics FBA_TMT-TC-2 Lead Free Tip Tinner, 20 g in 0.8 oz. Container #ad - Lead free RoHS Compliant. Input voltage: dc5v, charging cut-off Voltage: 4. 2v maximum charging Current: 1A. Rapidly re-tins badly oxidised soldering iron tips. Removes tip oxidation.
More information about Thermaltronics FBA_TMT-TC-2 #ad
WYCTIN 60-40 Tin Lead Rosin Core Solder Wire for Electrical Soldering and DIY 0.0236 inches(0.6mm) 0.11lbs #ad
Soldering Tip Cleaner Solder Tip Cleaning Wire and Holder Soft Coiled Brass Tip Cleaner Kit with 5 PCS Solder Tip Cleaning Wire and 1 PC Holder for Cleaning Soldering Irons and Tips, No Water Needed #ad
Kaisiking Soldering Iron Tip Cleaner Solder Tip Cleaning Wire and Holder Station Soft Coiled Brass with 3 Pcs Solder Tip Cleaning Wire and 1 Pcs Holder For Cleaning Soldering Irons and Tips #ad
HATCHBOX PLA 3D Printer Filament, Dimensional Accuracy +/- 0.03 mm, 1 kg Spool, 1.75 mm, Black, Pack of 1HATCHBOX 3D PLA-1KG1.75-BLK #ad - Spool diameter: 7. 88" - spool width: 2. 69" - spool hub Hole Diameter: 2. 20". Current: 3a, board size: 26 x 17mm/1. 02 x 067inchL*W. 1 kg approximately 2. 20 lbs Spool. Because of the lower melting temperatures and lack of warping, PLA filaments retain their color vibrancy and are a common choice for displays or small household prints.
No-clean compatible formulation. Input voltage: dc5v, charging cut-off Voltage: 4. 2v maximum charging Current: 1A. Lead free RoHS Compliant. On-board micro usb and soldering joints 5V input`port and charging status indicatorred indicator is charging, green indicator is full charged. The filaments are universally designed and compatible with 3D Printers using 1.
HATCHBOX PLA 3D Printer Filament, Dimensional Accuracy +/- 0.03 mm, 1 kg Spool, 1.75 mm, Black, Pack of 1 #ad - 75mm diameter filament, with a dimensional accuracy of +/- 003mm. Pla, or polylactic acid, is a commonly used thermoplastic material that does not require the use of a heated print bed. 1. 75mm filament diameter Dimensional Accuracy +/- 003mm. Pla polylactic acid 3d Printer Filament Vacuumed Sealed With Desiccant.
More information about HATCHBOX 3D PLA-1KG1.75-BLK #ad
Comgrow Creality Ender 3 Pro 3D Printer with Removable Build Surface Plate and UL Certified Power Supply 220x220x250mm #ad
Official Creality Ender 3 Pro 3D Printer with Glass Plate, Upgrade Cmagnet Build Surface Plate and UL Certified Meanwell Power Supply Build Volume 220x220x250mm #ad
Raspberry Pi Zero and Zero W Case, Retroflag GPi CASE with Retro Handheld Game Console and Safe Shutdown - with HeatsinkAKNES GPi Case #ad - Compatibility: 1, raspberry pi zero 2, raspberry pi zero w battery: AA Battery * 3 Case dimension: 135*81*32mm Weight: 183g Screen size: 2. 8'' includes: 1, screw driver 5, storage bag 3, gpi CASE 2, Heatsink 4, Instruction manual Safe Shutdown scripts: https://github. Com/retroflag/retroflag-picase Micro usb lithium battery charging board with overcharge, overdischarge and overcurrent protection.
Minimal residues. P>√ safe shutdown function: download the safe shutdown scripts or get support at http://download. Retroflag. Com. On-board micro usb and soldering joints 5V input`port and charging status indicatorred indicator is charging, green indicator is full charged. P>√ great customer service: rest assured that all our products have unconditional 18-months product promise Replace or Refund as well as lifetime easy-to-reach technical support.
Raspberry Pi Zero and Zero W Case, Retroflag GPi CASE with Retro Handheld Game Console and Safe Shutdown - with Heatsink #ad - . P>√ easy install: pogo pins, solderless and effortless to install. Pla polylactic acid 3d Printer Filament Vacuumed Sealed With Desiccant. P>√ multifeature: power switch; 2. 8 inch ips screen; 3.
More information about AKNES GPi Case #ad
Retroflag Raspberry pi case superpi Case with Safe Shutdown for Raspberry Pi case U Case New Version (Purple) #ad
GeeekPi Retroflag GPi Case with Raspberry Pi Zero W & Raspberry Pi Heatsink & Black Carrying Bag & 32G SD Card for Raspberry Pi Zero and Zero W with Safe Shutdown (GPi Case with Zero W Bag 32G) #ad
RETROFLAG Classic USB Controller-M Support XINPUT, DINPUT Mode and Turbo Function Compatible with Raspberry Pi, Windows, Switch #ad
3.7V 4000mAh 125050 Lipo Battery Rechargeable Lithium Polymer ion Battery Pack with JST Connector #ad
Raspberry Pi Zero and Zero W Case, Retroflag GPi CASE with 3.5mm Earphone, Micro SD Card, Card Reader, Heatsink and Portable Bag - with Safe Shutdown #ad