Victron BlueSolar 75/15 MPPT Charge Controller – 15 Amps / 75 Volts

Multi-stage charging with intelligent battery management. Manufacturer's 5-year warranty. Victron has been building power systems for over 38 years, and has a worldwide reputation for innovation, reliability, and quality. Separate programmable load output with low-battery cutout. They serve the marine, vehicle, and off-grid markets, and are based in the Netherlands.

Ultra-fast mppT and 98% peak efficiency. Especially in case of a clouded sky, when light intensity is changing continuously, this ultra fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers. Resin encapsulated electronics for marine use, and popular for RV use, too.

For up to 200 watts of panels at 12 volts, 400 watts at 24 volts.

---

Victron VE.Direct Bluetooth Dongle

View information wirelessly such as battery status and solar panel power, plus other useful data. The dongle is able to read data from the BMV-70x series battery monitors, Phoenix Inverters with VE. Direct port and mppt solar charge controllers except for the 150/70 and 150/85 using the VE. Direct communication port.

The victron VE. Direct bluetooth smart dongle uses Bluetooth Low Energy, which is a technology for the Internet of Things IoT. Using the VE. Direct to bluetooth smart dongle you can display your BMV or MPPT information on iOS and Android devices, using the VictronConnect app. Victronconnect app runs on iOS and Android devices.

5-year warranty on all Victron products, except batteries. Monitor your solar performance or battery status from your phone. Use with victron blueSolar MPPT controllers and BMV battery monitors.


Similar products

---

RENOGY 5 Pair MC4 Male/ Female Solar Panel Cable Connectors Double Seal Rings for Better Waterproof Effect

This is to ensure the long term durability. Renogy cable Connectors are made with highest quality materials. For permanent installations. Specifications renogy mc4 male/female solar panel cable connectors five pairs of mc4 solar panel cable connectors Ten silver plated copper Rated Current: 30A Maximum Voltage: 1000VDC Wiring Size Range: 10, 12 AWG Contact Resistance:.

You can feel that they are heavier and sturdier than other similar products in the market. Description this connector is specifically designed for connecting photovoltaic solar systems with high mechanical requirements and extreme weather conditions.


Similar products

---

Renogy TOOL-MC4 Solar Panel Mc4 ASSEMBLY Tool,

This connector is specifically designed for connecting photovoltaic solar systems with high mechanical requirements and extreme weather conditions. Victronconnect app runs on iOS and Android devices. The mc4 assembly tool is a hard plastic material that is very handy for both the assembly of custom MC4 wires, making it easier for new and veteran users to quickly and easily tighten and take apart the connectors.

For breaking connections after they have already been locked together. These connectors are also waterproof and resist dust build up. 5-year warranty on all Victron products, except batteries. Use with victron blueSolar MPPT controllers and BMV battery monitors. Renogy mc4 cable Connectors are made with highest quality materials.

These connectors are designed to complete a solar panel PV array, typically in parallel applications. Very handy for the assembly of custom Mc4 wires. Monitor your solar performance or battery status from your phone. Hard plastic.


Similar products

---

HQST 100 Watt 12 Volt Monocrystalline Lightweight Solar Panel for RV/ Boat/ Other Off Grid Applications

Top ranked ptc rating; high module conversion efficiency; fast and inexpensive mounting. The junction box is sealed and waterproof, and a pair of 10 inches cables we keep the panel cable short to avoid the cable shade from the solar panel with MC4 connectors comes with the panel automatically. Can be affixed by adhesive, grommets, zip ties or velcro; can be installed without costly structural roof reinforcements.

Make sure not to bend the panel. The result is a solar panel that is far more durable and efficient than traditional glass and aluminum models. The hqst 100 watt 12 volt monocrystalline light Weight Solar Panel uses advanced SunPower monocrystalline cells that have been laminated into a thin plastic sheet.

Please note: do not bend your panels. This connector is specifically designed for connecting photovoltaic solar systems with high mechanical requirements and extreme weather conditions. Use with victron blueSolar MPPT controllers and BMV battery monitors. Hard plastic. Victronconnect app runs on iOS and Android devices.

These are flexible panels, not bendable panels. Specifications: maximum power: 100w maximum System Voltage: 600V DC UL Optimum Operating Voltage Vmp: 17. 7v optimum operating Current Imp: 5.


Similar products

---

Link Solar Weatherproof ABS Solar Double Cable Entry Gland for All Cable Types 2mm² to 6mm² for Solar Project on Rv, Campervan, Boat

Hard plastic. Renogy mc4 cable Connectors are made with highest quality materials. These are flexible panels, not bendable panels. Pg7 waterproof cable gland used for all cable types 2mm to 6mm in Dia, Widely used for solar project when routing the cables. This connector is specifically designed for connecting photovoltaic solar systems with high mechanical requirements and extreme weather conditions.

Very handy for the assembly of custom Mc4 wires. Link solar abs solar cable entry gland is used for the passing of cables into the Motorhome, from the Solar panel, or for use on yachts /boats for cable entry from the mast. Suitable for most round cables for Solar Panel, Air conditioning, satellite, DC power, Aerial, Lighting etc.

Can be fixed with glue not included sikaflex 221 Sikaflex 252, dicor sealant, 291, alike or stainless steel self-tapping screws not included depending on position and sealing requirements etc. The whole set is within 1 ABS white box, 2 cable glands, 2 rubber seals. It can also be used for other installations and structures such as buildings, garages, sheds and other roofs Manufactured by Link Solar Use with victron blueSolar MPPT controllers and BMV battery monitors.

Please note: do not bend your panels. Holes on panels are pre-drilled for fast mounting and securing, perfect for non-permanent installations. Maximizes system output by reducing mismatch loss; 100% EL testing on all HQST solar modules, guaranteed no hot spots.


Similar products

---

Victron BMV-700 Battery Monitor

5-year warranty. Suitable for most round cables for Solar Panel, Aerial, DC power, Air conditioning, satellite, Lighting etc. Can be fixed with glue not included sikaflex 221 Sikaflex 252, dicor sealant, 291, alike or stainless steel self-tapping screws not included depending on position and sealing requirements etc.

The whole set is within 1 ABS white box, 2 cable glands, 2 rubber seals. Hard plastic. Use with victron blueSolar MPPT controllers and BMV battery monitors. Displays include: battery voltage, real-time current, state of charge, consumed amp-hours, and time to go. The bmv-700 monitors multiple parameters for a battery bank via a 500 amp shunt.

Since there are inefficiencies in charging, and variability in the power available from the battery depending on the rate of discharge Peukert's law, the monitor performs sophisticated calculations to correct for these factors. Renogy mc4 cable Connectors are made with highest quality materials. User-programmable alarms.

Holes on panels are pre-drilled for fast mounting and securing, perfect for non-permanent installations. Maximizes system output by reducing mismatch loss; 100% EL testing on all HQST solar modules, guaranteed no hot spots. Ideal for storage in tight spaces or crowded areas that are typically off limits for traditional glass and aluminum models.

This connector is specifically designed for connecting photovoltaic solar systems with high mechanical requirements and extreme weather conditions.


Similar products

---

Signstek MC3 MC4 Solar Crimping Tools for 2.5-6.0mm2 Solar Panel PV Cable

Package: 1xwire crimper use with victron blueSolar MPPT controllers and BMV battery monitors. Top ranked ptc rating; high module conversion efficiency; fast and inexpensive mounting. The junction box is sealed and waterproof, and a pair of 10 inches cables we keep the panel cable short to avoid the cable shade from the solar panel with MC4 connectors comes with the panel automatically.

Can be affixed by adhesive, grommets, zip ties or velcro; can be installed without costly structural roof reinforcements. Suitable for most round cables for Solar Panel, satellite, DC power, Aerial, Air conditioning, Lighting etc. Can be fixed with glue not included sikaflex 221 Sikaflex 252, dicor sealant, 291, alike or stainless steel self-tapping screws not included depending on position and sealing requirements etc.

The whole set is within 1 ABS white box, 2 cable glands, 2 rubber seals. High-precision ratchet mechanism for complete crimps. Description: the excellent handling, easy exchange of the crimping insert bits and the possibility of adding a positioning aid are facts in favor of these crimping pliers. These connectors are designed to complete a solar panel PV array, typically in parallel applications.

An ideal way for routing the cables while mounting solar panels on vehicles and boats, as well as other installations on buildings, garages, sheds etc. Displays the cumulative amp-hours used from the battery. These connectors are also waterproof and resist dust build up.


Similar products

---

Sun YOBA 5 Pairs of MC4 Male/ Female Solar Panel Cable Connectors

Suitable for most round cables for Solar Panel, Aerial, satellite, DC power, Air conditioning, Lighting etc. Can be fixed with glue not included sikaflex 221 Sikaflex 252, dicor sealant, 291, alike or stainless steel self-tapping screws not included depending on position and sealing requirements etc. The whole set is within 1 ABS white box, 2 cable glands, 2 rubber seals.

Please note: do not bend your panels. Rated voltage: 1000V DC. Top ranked ptc rating; high module conversion efficiency; fast and inexpensive mounting. The junction box is sealed and waterproof, and a pair of 10 inches cables we keep the panel cable short to avoid the cable shade from the solar panel with MC4 connectors comes with the panel automatically.

Can be affixed by adhesive, grommets, zip ties or velcro; can be installed without costly structural roof reinforcements. Hard plastic. For breaking connections after they have already been locked together. An ideal way for routing the cables while mounting solar panels on vehicles and boats, as well as other installations on buildings, garages, sheds etc.

Displays the cumulative amp-hours used from the battery. 5-year warranty. Calculates state of charge based on capacity.


Similar products

---

Signstek Y Branch MC4 Parallel Connector Adapter 1M2F+2M1F 1

Hard plastic. Monitor your solar performance or battery status from your phone. Holes on panels are pre-drilled for fast mounting and securing, perfect for non-permanent installations. Maximizes system output by reducing mismatch loss; 100% EL testing on all HQST solar modules, guaranteed no hot spots. Ideal for storage in tight spaces or crowded areas that are typically off limits for traditional glass and aluminum models.

Signstek y branch mc4 parallel connectors including one male two female and two male one female, which is designed to connect solar panels between solar panels and extension. An ideal way for routing the cables while mounting solar panels on vehicles and boats, garages, as well as other installations on buildings, sheds etc.

Displays the cumulative amp-hours used from the battery. These are flexible panels, not bendable panels. Pg7 waterproof cable gland used for all cable types 2mm to 6mm in Dia, Widely used for solar project when routing the cables. Renogy mc4 cable Connectors are made with highest quality materials. Please note: do not bend your panels.

Suitable for PV system. It does not need extra instruments for the removal of plugs and removal will not cause any harm to plugs. The cable connection adopts means of rivet and lock.


Similar products

---

Victron BlueSolar MPPT Control with 3m 9' cable

User-programmable alarms. Same housing as Victron BMV battery monitors. An ideal way for routing the cables while mounting solar panels on vehicles and boats, as well as other installations on buildings, garages, sheds etc. Displays the cumulative amp-hours used from the battery. 3 meter 9' cable included. View live data and set up solar controller parameters.

Hardened and durable steel construction for years of reliable services. The design of accurate crimping moulds and complete locking ensure high of crimping quality when crimping repeatedly. High transmission of force to reduce the working fatigue according to lever control. Portable style with perfect handle gripping position, logical sructure and perfect handle shape design matching human being engineering principle, light weight, it guarantees perfect crimping effect.

Easy to operate while using pliers, just insert the top into its position and press it. Rated current: 25A 2. 5-4. 0mm2. Suitable for PV system. It does not need extra instruments for the removal of plugs and removal will not cause any harm to plugs. The cable connection adopts means of rivet and lock.


Similar products